• Journal of Chest Surgery
• /
• 제49권1호
• /
• pp.1-8
• /
• 2016

More than a century ago, the first scientific report was published about fracture fixation with plates. During the 1950's, open reduction and plate fixation for fractures were standardized by the founders of Arbeitsgemeinschaft $f{\ddot{u}}r$ osteosynthesefragen/Association for the Study of Internal Fixation. Since the introduction of plate fixation for fractures, several plates and screws have been developed, all with their own characteristics. To accomplice more fracture stability, it was thought the bigger the plate, the better. The counter side was a compromised blood supply of the bone, often resulting in bone necrosis and ultimately delayed or non-union. With the search and development of new materials and techniques for fracture fixation, less invasive procedures have become increasingly popular. This resulted in the minimally invasive plate osteosynthesis (MIPO) technique for fracture fixation. With the MIPO technique, procedures could be performed with smaller incisions and thus with less soft tissue damage and a better preserved blood supply. The last 5 years rib fixation has become increasingly popular, rising evidence has becomeavailable suggesting that surgical rib fixation improves outcome of patients with a flail chest or isolated rib fractures. Many surgical approaches for rib fixation have been described in the old literature, however, most of these techniques are obscure nowadays. Currently mostly large incisions with considerable surgical insult are used to stabilize rib fractures. We think that MIPO deserves a place in the surgical treatment of rib fractures. We present the aspects of diagnosis, preoperative planning and operative techniques in regard to MIPO rib fixation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권6호
• /
• pp.544-549
• /
• 2009

Failure to use effective methods of reduction, fixation and immobilization may lead to osteomyelitis with the exposed necrotic bone, as the overzealous use of transosseous wires & plates that devascularizes bone segments in the compound comminuted fractures of mandible. Once osteomyelitis secondary to fractures has become established, intermaxillary fixation should be instituted as early as possible. Fixation enhances patient comfort and hinders ingress of microorganisms and debris by movement of bone fragments. Teeth and foreign materials that are in the line of fracture should be removed and initial debridement performed at the earliest possible time. Grossly necrotic bone should be excised as early as possible ; no attempt should be made to create soft tissue flaps to achieve closure over exposed bone. The key to treatment of chronic osteomyelitis of the mandible is adequate and prolonged soft tissue drainage. If good soft tissue drainage is provided over a long period, sequestration of infected bone followed by regeneration or fibrous tissue replacement will occur so that appearance and function are not seriously altered. Localization and sequestration of infected mandible are far better performed by natural mechanism of homeostasis than by cutting across involved bone with a cosmetic or functional defect. As natural host defenses and conservative therapy begin to be effective, the process may become chronic, inflammation regresses, granulation tissue is formed, and new blood vessels cause lysis of bone, thus separating fragments of necrotic bone(sequestra) from viable bone. The sequestra may be isolated by a bed of granulation tissue, encased in a sheath of new bone(involucrum), and removed easily with pincettes. This is a case report of the long-term conservative drainage care in osteomyelitis associated with mandibular fractures.

• 대한족부족관절학회지
• /
• 제17권2호
• /
• pp.106-114
• /
• 2013

Purpose: Posteroanterior screw fixation is biomechanically stronger than anteroposterior screw fixation. However, there are few literature about the correlation between clinical results and more strength by posteroanterior fixation. This study was performed to evaluate the clinical outcomes of the accelerated rehabilitation following anterior open reduction and posterior percutaneous screw fixation for displaced talar neck fractures. Materials and Methods: Eighteen cases were followed up for more than 1 year after posteroanterior fixation using headless compression screw for talar neck fractures. The clinical evaluation was performed according to American Orthopaedic Foot and Ankle Society (AOFAS) score and Hawkins criteria. As radiographic evaluation, the degree of fracture displacement, period to union, and occurrence rate of complications such as avascular necrosis through MRI were measured. Results: The AOFAS score was average 90.4 points at the last follow-up. There were 7 excellent, 9 good, and 2 fair results according to the Hawkins criteria. Therefore, 16 cases(88.8%) achieved satisfactory results. The degree of fracture displacement had improved significantly from preoperative average 5.6 mm to 1.2 mm immediate postoperatively, and maintained to 1.1mm at the last follow-up. All cases achieved bone union, and the period to union was average 12.4 weeks. There were 3 cases of avascular necrosis of talar body and 2 cases of post-traumatic arthritis. Conclusion: Anterior open reduction and posterior percutaneous headless screw fixation seems to be an effective surgical method for displaced talar neck fractures, because of the possibility of accurate restoration of articular surface, fixation strength enough to early rehabilitation, and needlessness of hardware removal.

• Hip & pelvis
• /
• 제35권3호
• /
• pp.175-182
• /
• 2023

Purpose: This study aims to compare patients in whom fixation failure occurred via cut-out (CO) or cut-through (CT) in order to determine patient factors and radiographic parameters that may be predictive of each mechanism. Materials and Methods: This retrospective cohort study includes 18 patients with intertrochanteric (IT) hip fractures (AO/OTA classification 31A1.3) who underwent treatment using a single lag screw design intramedullary nail in whom fixation failure occurred within one year. All patients were reviewed for demographics and radiographic parameters including tip-to-apex distance (TAD), posteromedial calcar continuity, neck-shaft angle, lateral wall thickness, and others. Patients were grouped into cohorts based on the mechanism of failure, either lag screw CO or CT, and a comparison was performed. Results: No differences in demographics, injury details, fracture classifications, or radiographic parameters were observed between CO/CT cohorts. Of note, a similar rate of post-reduction TAD>25 mm (P=0.936) was observed between groups. A higher rate of DEXA (dual energy X-ray absorptiometry) confirmed osteoporosis (25.0% vs. 60.0%) was observed in the CT group, but without significance. Conclusion: The mechanism of CT failure during intramedullary nail fixation of an IT fracture did not show an association with clinical data including patient demographics, reduction accuracy, or radiographic parameters. As reported in previous biomechanical studies, the main predictive factor for patients in whom early failure might occur via the CT effect mechanism may be related to bone quality; however, conduct of larger studies will be required in order to determine whether there is a difference in bone quality.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제5권1호
• /
• pp.37-50
• /
• 2020

Development of lightweight implant plates are important to reduce the stress shielding effect for a prosthesis of femur bone fractures. Stainless steel (SS-316L) is a widely used material for making implants. Stress shielding effect and other issues arise due to the difference in mechanical properties of stainless steel when compared with bone. To overcome these issues, composite materials seem to be a better alternative solution. The comparison is made between two biocompatible composite materials, namely Ti-hydroxyapatite and Ti-polypropylene. "Titanium (Ti)" is fiber material while "hydroxyapatite" and "polypropylene" are matrix materials. These two composites have Young's modulus closer to the bone than stainless steel. Besides the variety of bones, present paper constrained to femur bone analysis only. Being heaviest and longest, the femur is the most likely to fail among all bone failures in human. Modelling of the femur bone, screws, implant and assembly was carried out using CATIA and static analysis was carried out using ANSYS. The femur bone assembly was analyzed for forces during daily activities. Ti-hydroxyapatite and Ti-polypropylene composite implants induced more stress in composite implant plate, results less stress induced in bone leading to a reduction in shielding effect than stainless steel implant plate thus ensuring safety and quick healing for the patient.

• 대한두개안면성형외과학회지
• /
• 제21권6호
• /
• pp.384-386
• /
• 2020

This report describes osteotomy and iliac bone graft for malunion caused by failed mandibular fracture reduction. A 27-year-old man was referred 3 months after a motor vehicle accident. At another hospital, two operations had been performed for symphyseal fracture using two resorbable plates. Malocclusion was noted, and panoramic radiography and computed tomography revealed a misaligned dental arch, with a 9.37-mm gap between the central and the lateral incisor of the left mandible. A wafer was made from the patient's dental model, and a maxillary arch bar was applied. Through a lower gingivolabial incision, osteotomy was performed between the malunited symphyseal fracture segments. Both segments were reduced to their original position using the wafer and fixed with titanium miniplates via intermaxillary fixation (IMF). The intersegmental gap was filled with cancellous bone from the iliac crest. The gingival defect was covered with a mucosal transposition flap from the gingivolabial sulcus. IMF and the wafer were maintained for 5 and 9 weeks, respectively. At postoperative week 13, the screws were removed from the mandible and satisfactory occlusion was noted. His mouth opening improved from 2.5 to 3 finger breadths (40 mm). This case demonstrates the need for sufficient IMF when using resorbable plates.

• Archives of Plastic Surgery
• /
• 제38권6호
• /
• pp.851-860
• /
• 2011

Purpose: Reduction by simply assembling bones is recognized as treatment for a zygoma fracture. However, in patients who originally had a protruding zygoma, the fractured parts look like malarplasty after the edema subsides, giving a soft impression which patients notice. Thus, we created symmetry through simultaneous contralateral malar reduction in a unilateral zygoma fracture. Methods: In this study, the patients who had surgery between July, 2008 and December, 2009 with admission were object. In 76 patients with a zygoma fracture, the patients with bilateral zygoma fractures were excluded. Among 48 patients who had a reduction only after a unilateral zygoma fracture, the patients hoping for a reduction of their rough protruding zygoma were analyzed with front cephalometry. The study progressed on 22 patients who had simultaneous contralateral malar reduction in a unilateral zygoma fracture with consent. After fixing the fracture, we did a straight zygoma osteotomy through a 1.5 cm intraoral incision. After that, we created symmetry with a special ruler and fixed the broken zygomatic arch with a screw and plate. We evaluated the facial index and satisfaction with a statistical analysis before and after the surgery. Results: In 22 patients, there was no reoperation except for 1 patient who had a zygoma fracture. None of the patients were treated for infection or hematoma. Two patients complained of paresthesia after the malar reduction operation, but this subsided in 4 months. Most of them were satisfied with the malar reduction, especially the women, and we obtained a better mid facial contour with decreased facial width ($p$ <0.05). Conclusion: Existing zygoma fracture surgery focuses on anatomical reduction. However, we need to have a cosmetic viewpoint in fractures as interests of face contour arise. Thus, contralateral malar reduction got a 4.7 (range 0~5) from patients who had malar reduction surgery in our hospital. Although adjusting to all zygoma fractures has limitations, it can be a new method in zygoma fractures when there are limited indications of protruding zygoma and careful attention is given to patients' high demands.

• 대한정형외과학회지
• /
• 제54권3호
• /
• pp.227-236
• /
• 2019

목적: 경골 외측 고평부 골절에서 추가적인 피질골 창을 내지 않고 관절경을 이용한 정복술 및 골이식술 없이 내고정한 후 이에 따른 결과를 평가해 보았다. 대상 및 방법: 2009년 3월부터 2017년 3월까지 3차원 컴퓨터 단층촬영(computed tomography, CT)에서 관절면의 함몰 및 전위가 5 mm 이상이면서 Schatzker 분류상 II형에 해당하는 경골 외측 고평부 골절에 대해 관절경을 이용하여 수술적 치료를 하고 최소 18개월 이상 추시가 가능한 27예를 대상으로 하였다. 경골 피질골에 추가적인 창을 내지 않고 전외측 연골판하방 삽입구(inframeniscal portal)를 통해 골막거상기(freer elevator)를 이용하여 감입되어 있는 골편을 정복하여 관절면의 정복을 얻은 후 골이식 없이 5.0 mm 혹은 6.5 mm 유관나사를 이용하여 내고정술을 시행하였다. 결과 판정은 임상적 결과와 방사선적 결과로 나누어 Rasmussen의 방법을 이용하여 분석하였고 유관나사 제거술을 받은 13예의 환자에 한해서 관절경을 이용하여 2차 추시를 시행하였다. 결과: 최종 추시에서 모든 예에서 골유합을 얻었고, 평균 골유합 기간은 8.7주(8-12주)였다. Rasmussen 기준에 따라 방사선적 결과는 25예(92.6%)에서 우수 또는 양호의 만족스러운 결과를 얻었고 임상적 결과는 24예(88.9%)에서 우수 또는 양호의 결과를 얻었다. 2차 추시를 시행한 환자 13예에서 섬유연골로 잘 치유됨을 확인하였고 술 후 외래 추시 중 CT 촬영한 8예에서 골결손 부위 골이식 없이 유합된 소견을 확인하였다. 결론: 경골 외측 고평부 골절에서 추가적인 피질골 창을 내지 않고 관절경을 이용한 정복 및 골이식 없이 시행한 내고정술은 관절면을 정확히 정복할 수 있는 유용한 방법이며 임상적으로 양호한 결과를 얻을 수 있는 방법으로 생각된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제36권6호
• /
• pp.253-258
• /
• 2014

Purpose: Maxillofacial fractures are rapidly increasing from car accidents, industrial accidents, teenaged criminal activity, and sports injuries. Accurate assessment, appropriate diagnosis, and preparing individual treatment plans are necessary to reduce surgical complications. We investigated recent trends of facial bone fracture by period, cause, and type, with the objective of reducing surgical complications. Methods: To investigate time trends of maxillofacial fractures, we reviewed medical records from 2,196 patients with maxillofacial fractures in 1981~1987 (Group A), 1995~1999 (Group B), and 2008~2012 (Group C). We analyzed each group, comparing the number of patients, sex ratio, age, fracture site, and etiology. Results: The number of patients in each period was 418, 516, and 1,262 in Groups A to C. Of note is the increase in the number of patients from Group A to C. The sex ratios were 5.6:1, 3.5:1, and 3.8:1 in Groups A, B, and C. The most affected age group for fracture is 20~29 in all three groups. Traffic accidents are the most common cause in Groups A and B, while there were somewhat different causes of fracture in Group C. Sports-induced facial trauma was twice as high in Group C compared with Group A and B. Mandible fracture accounts for a large portion of facial bone fractures overall. Conclusion: We observed an increase in facial bone fracture patients at Kyungpook National University Dental Hospital over the years. Although facial injury caused by traffic accidents was still a major cause of facial bone fracture in all periods, the percentage decreased. In recent years, isolated mandible fracture increased but mandible and mid-facial complex fracture decreased, possibly because of a reduction in traffic accidents.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제11권1호
• /
• pp.1-11
• /
• 1989

This is a retrospective study on maxillofacial fractures. This study was based on a series of 442 patients with maxillofacial fractures treated at Dept, of oral and Maxillofacial Surgery, College of Dentistry, Chon Buk National University from Jan, 1984 to Sep. 1988. The results obtained were as follows: 1. The ratio of Male/Female was 4.8 : 1, and 3rd decade (43.9%) was the highest age group in incidence. 2. Monthly incidence was the highest in Oct,(10.6%). 3. The most frequent maxillofacial fracture site was mandible (70.0%), and zygoma & zygomatic arch (13.6%), maxilla(11.7%) and nasal bone (4.7%) were next in order of frequency. 4. Traffic accidents (47.5%), fight(24.8%) were the most common causes of maxillofacial fractures. 5. The most frequent chief complaint was painful swelling(40.7%). 6. In mandibular fractures, the most frequent fracture site was symphyseal area(28.9%) and simple fracture was the most frequent in type of fracture (71.2%). 7. In maxillary fractures, fracture with other facial bones (64.5%) was more frequent than fracture of maxilla only. The most common type of fracture was unilateral fractures(37.1%). 8. In fracture of zygoma complex, zygoma fracture was the most frequent fracture type(40.3%), zygoma and zygomatic arch fx, (30.6%), zygomatic arch fx, (29.1%) were next in order 9. Open reduction was major method of treatment in maxillofacial fractures : Mandible (77.5%), Maxilla (61.3%), Zygoma complex(43.1%). 10. Maxillofacial fractures were most frequently combined with head injury(39.3%), and lower extremities(17.0%), upper extremities(13.6%) were next in order.