• 한국건설순환자원학회논문집
• /
• 제6권2호
• /
• pp.81-88
• /
• 2011

폐유황으로부터 제조한 개질유황재료를 시멘트 대체 혼화재로 활용 가능성 여부를 알아보기 위한 연구의 일환으로 개질유황의 품질특성 및 혼화재료로 사용한 모르타르의 기초적 특성에 대하여 분석 및 검토한 결과 개질유황을 혼합한 모르타르의 유동성은 혼합률이 증가함에 따라 감소하였으며, 압축강도는 저하되었다. 또한, 개질유황을 15% 이내로 혼합한 모르타르의 휨, 인장 및 접착강도는 개선되었으며, 수축량은 증가하였다. 특히 내화학성은 혼합률이 증가함에 따라 우수한 저항성능이 나타났다. 따라서 본 연구에서는 개질유황을 시멘트 대체 혼화재로 활용 가능함을 확인할 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제29권1호
• /
• pp.66-72
• /
• 2004

All-in-one adhesives were recently developed for reducing the technique sensitivity and chair time, but lots of concerns were made on bondability, longevity, and microleakage. The object of this study was to evaluate microleakage and marginal quality of all-in-one adhesives using electrochemical method and SEM analysis quantitatively. After making Class V cavities, they were bulk filled with Heliomolar(#A1 after surface treatment with three adhesives: Adper Prompt (Group A), One up bond F (Group O), Xeno III (Group X) Electrical conductivity (microamphere, ${\mu}A$) was checked two times: before and after cavity filling. Percentage of leaky margin was estimated from SEM image (${\times}1,000$). The data were statistically analysed: ANOVA and Paired T test for electrical conductivity, Kruskal-Wallis and Mann-Whitney test for marginal quality, Spearman s rho test for checking of relationships between 2 methods. The result were as follows: 1. There was no difference in microleakage between adhesive systems and every specimen showed some of microleakage after filling. 2. Microleakage was reduced about 70% with composite resin filling. 3. Marginal quality was the best in group A. decreasing among groups in the following order: group O, followed by group X. There were significant differences between group A and group X (p=0.015), and between group 0 and group X (p=0.019). 4. There was no relationship between the microleakage measured by electrochemical method and marginal quality measured by SEM analysis. Within the results of this study, there was no difference in microleakage among groups by electrical conductivity. However, significant difference in marginal quality was seen among groups. It was believed that these dissimilar results might be induced because of their own characteristics. Analysis of microleakage needs various methods for accuracy.

• 한국유통학회지:유통연구
• /
• 제11권4호
• /
• pp.97-124
• /
• 2006

본 연구에서는 소매전문점에서의 관계마케팅요인(고객화, 전문성, 커뮤니케이션, 유대)이 관계품질(신뢰, 만족) 및 점포충성도에 미치는 영향을 실증적으로 검정하였다. 그 결과 커뮤니케이션을 제외한 모든 관계마케팅요인이 관계품질에 긍정적인 영향을 미치고 있고 그 가운데 고객화가 관계품질 형성에 가장 높은 영향을 미치는 것으로 나타났다. 또한 소비자 특성변수(성별과 거래경험 및 다양성 추구성향)에 따른 조절효과에서는 관계마케팅요인에 따라 중요도에 차이는 있으나, 커뮤니케이션을 제외한 모든 관계마케팅요인이 관계품질에 긍정적인 영향을 미쳐 최종적으로 점포충성도를 형성하는 것을 확인할 수 있었다. 소매전문점은 고객과의 관계형성에 있어 대형점포보다는 유리한 조건에 있다. 그러므로 개별 고객들의 성향을 면밀히 파악하여 맞춤식 서비스를 제공하는 고객화와 고객들과의 관계형성을 위한 종업원의 전문성 및 유대관계가 소매전문점 고객의 점포충성도를 형성하는 중요한 요인임이 확인되었다.

• 한국산림과학회지
• /
• 제82권4호
• /
• pp.396-405
• /
• 1993

이 논문에서는 비선형계획법(非線型計劃法)에 의해 파티클보드 생산공정을 분석하여 생산비용을 최소화하기 위한 전산(電算)모델을 제시하였다. 의사결정변수(意思決定變數)는 파티클보드의 생산비용 및 품질과 밀접한 관련이 있는 생산공정상의 요소로써 파티클보드의 비중(比重), 접착제 첨가량 및 매트함수율로 설정하였으며, 휨강도 및 박리강도와 같은 파티클보드의 최저 품질기준은 제약조건(制約條件)으로써 이러한 의사결정변수(意思決定變數)들의 비선형함수(非線型函數)로 수식화되었다. 또한 전산(電算)모델을 시나리오에 따른 가상적인 생산여건들에 적용하여 봄으로써, 칩가격, 접착제 가격 및 열압속도와 같은 경영인자(經營因子)들의 변동(變動)이 생산비용에 마치는 영향력을 분석(分析)하여 전산모델의 적용례(適用例)를 제시하였다.

• 한국해양공학회지
• /
• 제22권1호
• /
• pp.53-57
• /
• 2008

Friction welding was performed to investigate mechanical properties for Ni-base superalloy with 15 mm diameter solid bar. The main friction welding parameters were selected to endure good quality welds on the basis of visual examination, tensile tests, impact energy test, Vickers hardness surveys of the bond of area and heat affected zone. And then, the nondestructive technique to evaluate the weld quality was carried out by acoustic emission(AE) and ultrasonic attenuation coefficient. The tensile strength of the friction welded joint was shown up to 90 % of the Alloy718 base metal under the condition of the heating time over 5 sec. The optimal welding conditions were n=2,000 rpm, $P_1=200$ MPa, $P_2=200$ MPa, $t_1=8$ sec and $t_2=5$ sec when the total upset length was 4.4 mm.

• Journal of the Korean Wood Science and Technology
• /
• 제23권4호
• /
• pp.18-26
• /
• 1995

국내 합판 산업계는 오랫동안 남양재 활엽수를 주로 사용하여 왔으나, 환경 보존적인 측면에서 열대재의 벌채를 규제하는 등 여러 요인으로 인하여 합판용 원목의 수입이 어려워지고 있다. 이에 대응하기 위하여 합판용 원목을 침엽수재로 대체할 필요가 있으며, 침엽수 합판 제조를 위한 기초 자료를 제공하기 위하여 본 연구를 수행하였다. 공시 수종은 국내에서 조림한 낙엽송과 시베리아산 낙엽송 및 뉴질랜드산 라디에타 소나무였으며, 공시원목으로부터 얻어진 단판의 품질과 이들 단판으로 제조한 합판의 접착력과 휨강도를 조사하였다. 이면 할렬실험에서 시베리아산 낙엽송은 다른 수종에 비해 할렬 밀도가 낮게 나타났다. 단판 품질은 접착력 및 휨강도에 거의 영향을 미치지 않았으나 합판의 휨강도에서는 심재와 변재에 따른 차이가 있음을 알 수 있었다. 이는 합판제조사 심재와 변재를 구별하여 사용할 필요가 있었다. 라디에타 소나무의 변재부로 만든 합판 MOR은 다른 수종에 비해 우수하게 나타났다. 접착력 실험에 있어서는 페놀 접착제를 사용하여 만들어진 합판만이 구조용으로써 사용할 수 있음을 알았다. 목파율은 동일 수종 합판에서는 라디에타 소나무 구성이 가장 높게 나타났으며, 이수종(異樹種) 합판에서는 표판을 국산 낙엽송, 심판을 라디에타 소나무를 사용하여 만든 합판에서 가장 높게 나타났다.

• 동아시아식생활학회지
• /
• 제23권4호
• /
• pp.470-476
• /
• 2013

The property of deep frying oil is one of the important factors in fried food quality. The purpose of this study is to identify the quality of deep frying oil in continuous usages for 4 days by two types of fryers: traditional deep-fat fryer and modified oil-water fryer. After frying pork cutlets, the frying oil was kept not only for several physical analyses such as color, viscosity, and water content but also for the quality analyses of frying oil, such as free fatty acid, double bond changes and oxidative rancidity formation. The oil fried in a traditional deep-fat fryer was significantly increased in terms of physical values including moisture content, viscosity, and color, compared to those of the modified fryer, continuously for 4 days. The oil fried by a traditional deep-fat fryer exhibited a significant increase in its free fatty acid content compared to that fried by a modified oil-water fryer, while the iodine value was significantly decreased in the oil fried by a traditional deep-fat fryer when compared to control oil and oil fried by the modified oil-water fryer. In the peroxide value as an indicator of primary oxidation products, the oil fried by both fryers was significantly increased till the second day but decreased in value after the third day because of unstable hydroperoxide decomposition. The p-anicidine value is used as an indicator of secondary oxidation products, the oil fried in a traditional deep-fat fryer was significantly increased in value compared to that of a modified oil-water fryer.

• 한국융합학회논문지
• /
• 제9권6호
• /
• pp.133-145
• /
• 2018

본 논문은 생물학적 측면과 사회적 측면에서 상이한 조건을 가지고 있는 전후기 중년 남성의 삶의 질에 미치는 영향 요인을 알아보고자 하는 서술적 조사연구로 2017년 <기혼 중년 남성의 직업 스트레스, 직업 안정성, 우울, 가족유대감, 주관적 건강상태, 사회적 지지가 삶의 질에 미치는 영향에 대한 융합적 연구>인 일차연구 자료와 추가 수집한 자료 총 170부를 이용한 이차분석 연구이다. SPSS/WIN 18.0 프로그램을 이용하여 분석한 결과, 전기 중년 남성의 삶의 질의 영향 요인은 우울, 가족유대감, 규칙적 운동, 노후 생활에 대한 불안, 월 수입 순으로 설명력 77.8%이며 후기 중년 남성은 사회적 지지, 주관적 건강상태, 직업 안정성, 직업 스트레스, 흡연, 근속연수 순으로 삶의 질에 영향을 주는 것으로 설명력은 64.7%로 나타났다. 따라서 전후기 시기별 삶의 질에 미치는 영향 요인에 적합한 간호중재 프로그램 개발과 사회적 환경 조성, 사회적 지지 체계의 강화 및 확충과 정책 수립 등 다학제적, 융합적 접근을 통해 중년 남성의 삶의 질을 향상 시킬 필요가 있다.

• Asian Journal of Atmospheric Environment
• /
• 제2권1호
• /
• pp.34-46
• /
• 2008

Emissions inputs for use in air quality modeling of Korea were generated with the emissions inventory data from the National Institute of Environmental Research (NIER), maintained under the Clean Air Policy Support System (CAPSS) database. Source Classification Codes (SCC) in the Korea emissions inventory were adapted to use with the U.S. EPA's Sparse Matrix Operator Kernel Emissions (SMOKE) by finding the best-matching SMOKE default SCCs for the chemical speciation and temporal allocation. A set of 19 surrogate spatial allocation factors for South Korea were developed utilizing the Multi-scale Integrated Modeling System (MIMS) Spatial Allocator and Korean GIS databases. The mobile and area source emissions data, after temporal allocation, show typical sinusoidal diurnal variations with high peaks during daytime, while point source emissions show weak diurnal variations. The model-ready emissions are speciated for the carbon bond version 4 (CB-4) chemical mechanism. Volatile organic carbon (VOC) emissions from painting related industries in area source category significantly contribute to TOL (Toluene) and XYL (Xylene) emissions. ETH (Ethylene) emissions are largely contributed from point industrial incineration facilities and various mobile sources. On the other hand, a large portion of OLE (Olefin) emissions are speciated from mobile sources in addition to those contributed by the polypropylene industry in point source. It was found that FORM (Formaldehyde) is mostly emitted from petroleum industry and heavy duty diesel vehicles. Chemical speciation of PM2.5 emissions shows that PEC (primary fine elemental carbon) and POA (primary fine organic aerosol) are the most abundant species from diesel and gasoline vehicles. To reduce uncertainties in processing the Korea emission inventory due to the mapping of Korean SCCs to those of U.S., it would be practical to develop and use domestic source profiles for the top 10 SCCs for area and point sources and top 5 SCCs for on-road mobile sources when VOC emissions from the sources are more than 90% of the total.

• The Journal of Advanced Prosthodontics
• /
• 제12권3호
• /
• pp.157-166
• /
• 2020

PURPOSE. The aim of this study was to evaluate the clinical performance and reliability of plasma sprayed nanostructured zirconia (NSZ) coating. MATERIALS AND METHODS. This study consisted of three areas of analysis: (1) Mechanical property: surface roughness of NSZ coating and bond strength between NSZ coating and titanium specimens were measured, and the microstructure of bonding interface was also observed by scanning election microscope (SEM). (2) Biocompatibility: hemolysis tests, cell proliferation tests, and rat subcutaneous implant test were conducted to evaluate the biocompatibility of NSZ coating. (3) Mechanical compatibility: fracture and artificial aging tests were performed to measure the mechanical compatibility of NSZ-coated titanium abutments. RESULTS. In the mechanical study, 400 ㎛ thick NSZ coatings had the highest bond strength (71.22 ± 1.02 MPa), and a compact transition layer could be observed. In addition, NSZ coating showed excellent biocompatibility in both hemolysis tests and cell proliferation tests. In subcutaneous implant test, NSZ-coated plates showed similar inflammation elimination and fibrous tissue formation processes with that of titanium specimens. Regarding fatigue tests, all NSZ-coated abutments survived in the five-year fatigue test and showed sufficient fracture strength (407.65-663.7 N) for incisor teeth. CONCLUSION. In this study, the plasmasprayed NSZ-coated titanium abutments presented sufficient fracture strength and biocompatibility, and it was demonstrated that plasma spray was a reliable method to prepare high-quality zirconia coating.