• 제목/요약/키워드: bond mechanism

검색결과 460건 처리시간 0.018초

재래형 콤포짓트 레진의 마찰 . 마멸거동 (Friction and Wear Behaviors of Conventional Composite Resins)

  • 임정일;서세광;김교한;김석삼
    • Tribology and Lubricants
    • /
    • 제16권3호
    • /
    • pp.166-172
    • /
    • 2000
  • The friction and wear characteristics of dental composite resins such as Charisma, Elitefil, TPH and Veridonfil were investigated. Furthermore, The surface characteristics examination, the analysis of contents of filler, Victors hardness and fracture toughness measurement of composite resins were preformed. The wear test applied ball to move reciprocationally on flat wear tester at room temperature. Microstructure of surfaces and worn surfaces were observed by SEM. Experimental results indicate that the friction coefficient of TPH was quite low, and the wear resistance of TPH was better than that of Charisma, Elitefil or Veridonfil at the same condition. The main wear mechanism was found to be plastic flow and abrasive wear by failure of filler's bond to the matrix.

철근 콘크리트 연결보의 하중 전달 기구와 변형 능력 (The Mechanism of Shear Resistance and Deformability for Reinforced Concrete Coupling Beams)

  • 홍성걸;장상기
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2006년도 학술발표회 논문집
    • /
    • pp.233-240
    • /
    • 2006
  • An experimental investigation on the behavior of reinforced concrete coupling beams is presented. The test variables are the span-to-depth ratio, the ratio of flexural reinforcement and the ratio of shear rebar. The distribution of arch action and truss action which compose the mechanism of shear resistance is discussed. This study proposes the deformation model for reinforced concrete coupling beams considering the bond slip of flexural reinforcement. The yielding of flexural reinforcements determines yielding states and the ultimate states of reinforced concrete coupling beam are defined as the ultimate compressive strain of struts and the degradation of compressive strength due to principal tensile strain of struts. It is expected that this model can be applied to displacement-based design methods.

  • PDF

Nucleophilic Substitution Reactions of Thiopheneethyl Arenesulfonates with Anilines and N,N-Dimethylanilines

  • 오혁근;윤정환;조인호;이익준
    • Bulletin of the Korean Chemical Society
    • /
    • 제18권4호
    • /
    • pp.390-394
    • /
    • 1997
  • Nucleophilic substitution reactions of 2-thiopheneethyl benzenesulfonates (2-TEB) and 3-thiopheneethyl benzenesulfonates (3-TEB) with anilines and N,N-dimethylanilines (DMA) are investigated in acetonitrile at 60.0 ℃. The cross-interaction constants ρxz determined for the reactions with anilines are large negative (- 0.50) which are comparable to those for the similar predominantly frontside-attack SN2 reactions of 1-phenylethyl (1-PEB), 2-phenylethyl (2-PEB) and cumyl benzenesulfonates. A large negative ρxz value (- 0.4∼- 0.8) is considered to provide a mechanistic criterion for the frontside-attack SN2 mechanism with a four-center transition state. In agreement with this proposal the kinetic isotope effects, kH/kD, involving deuterated aniline nucleophiles are all greater than one reflecting partial N-H(D) bond cleavage in the transition state. The MO theoretical reactant structures of 1-PEB, 2-PEB and 2-TEB based on the PM3 calculation show that the benzene ring blocks the backside nucleophile approach to the reaction center carbon (Cα) enforcing the frontside-attack SN2 mechanism.

Kinetics and Mechanism of the Aminolysis of Phenylacetyl Chlorides in Acetonitrile

  • 이해황;이지원;고한중;이익천
    • Bulletin of the Korean Chemical Society
    • /
    • 제19권6호
    • /
    • pp.642-645
    • /
    • 1998
  • The aminolysis reactions of phenylacetyl chlorides with anilines and N,N-dimethylanilines (DMAS) in acetonitrile at -15.0 ℃ are investigated. The magnitude of ρx (= -2.8 ∼ -2.9) and ρy (= 0.9 ∼ 1.3, after correcting for the fall-off), and the negative sign of ρxy (= -0.12) for the reactions with anilines suggest an associative SN2 mechanism. For the reactions with DMAs, the magnitude of these Hammett coefficients increases so that tighter bond making in the transition state (TS) is predicted. A nonlinear Hammett plots obtained for the DMAs with an electron acceptor substituent is interpreted to result from a more advanced degree of leaving group departure to assist closer approach of the bulky DMA in the TS. The normal secondary kinetic isotope effects $(k_H/k_D>1.0)$ involving deuterated anilines suggest partial deprotonation by hydrogen bonding to the departing chloride ion.

Cu-Y 제올라이트상의 NO분해반응에 대한 양자화학적 해석 (Quantum Chemical Calculation of NO Decomposition over Cu-Y Zeolite)

  • 김명철
    • 공업화학
    • /
    • 제7권2호
    • /
    • pp.321-325
    • /
    • 1996
  • $Cu^{n+}$ 교환된 Y형 제올라이트 상에서 진행되는 NO분해반응의 특성을 양자화학적 계산을 통해 해석하였다. 제올라이트내 양이온 자리를 나타내는 Cluster모델들에 대해 CNDO/2와 같은 이론적 계산을 수행하여 전체에너지, LUMO에너지 및 Wiberg결합차수값들을 얻었다. 각 모델들의 전체에너지와 결합차수값들을 통해 제올라이트 골격내 $Cu^{n+}$ 양이온 자리에서의 NO분해반응에 대한 반응기구를 고찰하였다. 제안된 분자모델들은 각기 다른 Si/Al비와 $Cu^+$$Cu^{2+}$ 교환된 양이온의 경우로 구분하여 고찰하였다. LUMO에너지의 계산을 통해 모델분자들의 L산성도를 해석하였다. NO분해반응의 메카니즘은 NO의 흡착, $N_2$$O_2$로의 분해, $N_2$$O_2$의 탈착의 단계가 연속적으로 진행될 가능성이 있었다. 양이온 자리에서 $Cu^{2+}$$Cu^+$ 보다 더 강한 L산성을 나타내었다.

  • PDF

N-Tert-butylbenzothiazole-2-sulfenamide의-S-N = 결합에 대한 전기화학적 환원 (Electrochemical Reduction on the -S-N= Bond of N-Tert-butylbenzothiazole-2-sulfenamide)

  • 김해진;정근호;최규원;김일광;임선영
    • 대한화학회지
    • /
    • 제35권6호
    • /
    • pp.673-679
    • /
    • 1991
  • N-Tert-butylbenzothiazole-2-sulfenamide (TBBS;가황촉진제)의 전기화학적 환원을 직류와 시차펄스 폴라로그래피, 순환 전압전류법, 조절전위 전기량법으로 연구하였다. TBBS의 전극환원과정은 단일 환원파(-2.31 volts vs. Ag/0.1M AgN$O_3$)에서 비가역으로 4전자가 이동하는 E-C-E-C 반응기구로 진행되었다. 조절전위 전기분해 결과 sulfenamide(-S-N=)결합이 끊어지고 mercaptobenzothiazole (MBT)과 유리된 황 그리고 benzothiazole disulfide (MBT dimer) 등이 생성물로 얻어졌다. 생성물의 분석결과와 pH변화에 따른 폴라로그램의 해석을 바탕으로 전기화학적 반응기구를 제안하였다.

  • PDF

N-Oxyldiethylenebenzothiazole-2-sulfenamide의 -S-N= 결합에 대한 전기화학적 환원 (Electrochemical Reduction on the -S-N= Bond of N-Oxyldiethylenebenzothiazole-2-sulfenamide)

  • 김해진;정근호;최규원;김일광;임선영
    • 대한화학회지
    • /
    • 제35권6호
    • /
    • pp.680-688
    • /
    • 1991
  • N-Oxyldiethylenebenzothiazole-2-sulfenamide (ODBS;가황산촉진제)의 전기화학적 환원을 직류와 시차펄스 폴라로그래피 순환 전압전류법, 조절전위 전기량법으로 연구하였다. ODBS의 전극환원과정은 단일 환원파(-1.86 volts vs. Ag/0.1 M AgN$O_3$in AN)에서 비가역으로 3전자가 이동하는 E-C-E-C 반응 메카니즘으로 진행되었다. 조절전위 전기분해 결과 SULFENAMIDE(-S-N=) 결합이 끊어지고 mercaptobenzothiazole(MBT)과 benzothiazole disulfide(MBT dimer) 그리고 유리된 sulfur 등이 생성물로 얻어졌따. pH 변화에 따른 폴라로그램의 해석과 생성물 분석의 결과를 바탕으로하여 전기화학적 반응 메카니즘을 제안하였다.

  • PDF

DFT Study for Adsorption and Decomposition Mechanism of Trimethylene Oxide on Al(111) Surface

  • Ye, Cai-Chao;Sun, Jie;Zhao, Feng-Qi;Xu, Si-Yu;Ju, Xue-Hai
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권7호
    • /
    • pp.2013-2018
    • /
    • 2014
  • The adsorption and decomposition of trimethylene oxide ($C_3H_6O$) molecule on the Al(111) surface were investigated by the generalized gradient approximation (GGA) of density functional theory (DFT). The calculations employed a supercell ($6{\times}6{\times}3$) slab model and three-dimensional periodic boundary conditions. The strong attractive forces between $C_3H_6O$ molecule and Al atoms induce the C-O bond breaking of the ring $C_3H_6O$ molecule. Subsequently, the dissociated radical fragments of $C_3H_6O$ molecule oxidize the Al surface. The largest adsorption energy is about -260.0 kJ/mol in V3, V4 and P2, resulting a ring break at the C-O bond. We also investigated the decomposition mechanism of $C_3H_6O$ molecules on the Al(111) surface. The activation energies ($E_a$) for the dissociations V3, V4 and P2 are 133.3, 166.8 and 174.0 kJ/mol, respectively. The hcp site is the most reactive position for $C_3H_6O$ decomposing.

Molecular Dynamics Simulations on β Amyloid Peptide (25-35) in Aqueous Trifluoroethanol Solution

  • Lee, Sang-Won;Kim, Yang-Mee
    • Bulletin of the Korean Chemical Society
    • /
    • 제25권6호
    • /
    • pp.838-842
    • /
    • 2004
  • Amyloid peptide (A${\beta}$) is the major component of senile plaques found in the brain of patient of Alzheimer's disease. ${\beta}$-amyloid peptide (25-35) (A${\beta}$25-35) is biologically active fragment of A${\beta}$. The three-dimensional structure of A${\beta}$25-35 in aqueous solution with 50% (vol/vol) TFE determined by NMR spectroscopy previously adopts an ${\alpha}$-helical conformation from $Ala^{30}$ to $Met^{35}$. It has been proposed that A${\beta}$(25-35) exhibits pH- and concentration-dependent ${\alpha}-helix{\leftrightarrow}{\beta}$sheet transition. This conformational transition with concomitant peptide aggregation is a possible mechanism of plaque formation. Here, in order to gain more insight into the mechanism of ${\alpha}$-helix formation of A${\beta}$25-35 peptide by TFE, which particularly stabilizes ${\alpha}$-helical conformation, we studied the secondary-structural elements of A${\beta}$25-35 peptide by molecular dynamics simulations. Secondary structural elements determined from NMR spectroscopy in aqueous TFE solution are preserved during the MD simulation. TFE/water mixed solvent has reduced capacity for forming hydrogen bond to the peptide compared to pure water solvent. TFE allows A${\beta}$25-35 to form bifurcated hydrogen bonds to TFE as well as to residues in peptide itself. MD simulation in this study supports the notion that TFE can act as an ${\alpha}$-helical structure forming solvent.

MeOH-MeCN 혼합용매계에서 치환된 벤젠술폰산벤질의 가용매 분해반응 (Solvolysis of Substituted Benzyl Benzenesulfonates in MeOH-MeCN Mixtures)

  • 이익춘;이원희;강철현;손세철;김충식
    • 대한화학회지
    • /
    • 제28권6호
    • /
    • pp.366-373
    • /
    • 1984
  • 기질의 치환기가 Y이고 이탈기의 치환기가 Z인 치환된 벤질 벤젠술포네이트 유도체들의 가용매-분해반응 속도를 MeOH-MeCN 혼합용매에서 측정하였다. 결과로 부터 본 반응은 전이 상태에서 기질-이탈기 사이의 결합파괴가 친핵체-기질 사이의 결합형성보다 우세한 dissociative $S_N2$ 메카니즘으로 진행됨을 알 수 있었다. 복합 Hammett 관계 분석에서 상호작용항 ${\rho}_{YZ}$가 작은 것으로 부터 본 반응에서는 기질 및 이탈기의 치환기 사이에 직접적인 상호작용이 중요하지 않음을 알 수 있었으며 이는 본 반응이 dissociative $S_N2 $반응임을 뒷받침해주는 것으로 설명할 수 있었다. 전이 상태 변화에 대한 QM해석 방법은 실험 결과와 잘 일치됨을 알 수 있었으며 PES모형 해석에 의해서는 이탈기 효과를 고려함에 있어 실험결과와 일치되지 않는 면이 있음을 알 수 있었다.

  • PDF