• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.4
• /
• pp.317-323
• /
• 1993

In order to clarify the contents of active principles in floral inhibition cultured Angelica gigas roots, the amounts of crude extract and the contents of decursin and decursinol angelate in the yearly roots were analyzed and compared with respect to the root age, root part and growth stage. The woody cell, weight and width of pith and cortex were also investigated at different growth stage to observe the developmental characteristics of lignification in the roots as bolting and flowering in normal cultured Angelica gigas. The amount of crude extracts did not differ with plant ages, whereas the contents of decursin and decursinol angelate were differed and the highest in 3 year old roots. The contents of decursin in 1, 2 and 3 year old roots were 3.71, 4.76 and 8.20% and those of decursinol angel ate were 2.84, 3.40 and 5.01%, respectively. The amount of crude extracts, and the contents of decursin and decursinol angelate were the highest in fine roots, followed by the lateral roots and the lowest in the primary roots. On the other hand, the amount of the constituents in the cortex were much higher than those in the pith of the root. The amounts of crude extract, and the contents of decursin and decursinol angelate showed the highest value at the vagetative stage and decreased with development to bolting and blooming stage. Woody cells were accumulated in the pith of the root as advancing growth stage, so that the weight and radius of the pith increased, whereas the relative weight and width of the cortex decreased slightly.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.2
• /
• pp.146-153
• /
• 1985

To investigate the possibility of improvement of seed mustard varieties, these experiments were conducted at Muan in Chonranamdo for three years with five local seed mustard varieties and seeding dates. Local varieties collected from Seoul, Cheju and introduced from Japan showed earlier bolting date while Yungsanpo and Suweon varieties bolted later and Suweon variety exhibited the latest maturity. Suweon variety had the shortest plant height with higher number of grains per pod. Seoul and Yungsanpo varieties had more total branch numbers than others. There was no varietal difference in grain weight, pod length and one liter weight. Grain yield per 10a was highest in Seoul variety by 247.5kg. Late seeding date delayed the bolting and flowering date while plant height, total branch numbers, pod numbers per ear and grain number per pod were decreased. The magnitude of varietal response to seeding date was varied greatly with traits. Grain weights per liter, 1,000 grain weight, pod lengths, oil contents, and fatty acid compositions were not affected by the different seeding dates.

• Tunnel and Underground Space
• /
• v.20 no.4
• /
• pp.267-276
• /
• 2010

In modern rock engineering practice, fully grouted rock bolting is actively employed as a major supporting system, so that understanding the behavior of fully grouted rock bolts is essential for the precise design of rock bolting. Despite its importance, the supporting mechanism of rock bolts has not been fully understood yet. Since most of existing analytical models for rock bolts were developed by drastically simplifying their boundary conditions, they are not suitable for the bolts of in-situ condition. In this study, 3-D elastic FE analysis of fully grouted rock bolts has been conducted to provide insight into the supporting mechanism of the bolt. The distribution of shear and axial stresses along the bolt are investigated with the consideration of different boundary conditions including three different displacement boundary conditions at the bolt head, the presence of intersecting rock joints, and the variation of elastic modulus of adjacent rock. The numerical result reveals that installation of the faceplate at the bolt head plays an important role in mobilizing the supporting action and enhancing the supporting capabilities of the fully grouted rock bolts.

• Korean Journal of Medicinal Crop Science
• /
• v.3 no.2
• /
• pp.84-90
• /
• 1995

These experiment were conducted to know the seedling growth pattern and to deter­mine the appropriate seeding amount for producing the small and middle sized uniform seedlings of which known to have low bolting in the cultivation of Angelica gigas. Cotyledons of seedling were emerged by 18 days after seeding and the first and the second leaf appeared at 5.0 days and 9.8 days respectively after the anterior leaf emergence. Leaf development from the 3rd to the 6th in order needs about 13 days respectively after the emergence of anterior leaf. Growth of small and middle sized seedling of which required $60{\sim}87days$ were 3.0 to 7.0mm in root head diameter, 6.3 to 10.3cm in root length, 0.4 to 1.3g in fresh root weight per plant with 3.9 to 5.0 leaves. The highest production ratio of small and middle sized seedlings was shown in $15,000seeds/m^2$ of seeding amount as 52.8% respectively.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.3
• /
• pp.29-36
• /
• 2017

It has been known that rockbolt is one of important supports improving the support capacity with shotcrete in NATM tunnel. Also, it is necessary for the inclined system bolting to enhance the efficiency of installation in case of a narrow space such as cross passage and enlargement tunnel. However, there is no profound technical study for the effect of inclined rockbolt of systematic installation on the support mechanism and ground behaviour in NATM tunnel. In this study, the effects of the length and installation angle of rockbolt on the characteristics of support and ground reinforcement were analyzed by using 3D finite element numerical study. Through the numerical results for the parametric modelling of inclined rockbolt, the characteristics of mechanical behaviors between the axial force of rockbolt and the effect of ground reinforcement in regard to the various factors of the length and installation angle of rockbolt were verified and reviewed thoroughly. Also, it was shown that the installation angle of rockbolt for enhancing the arching effect in NATM tunnel was $45^{\circ}$, and the difference of the reinforcing effect for support between the installation angles of $75^{\circ}$ and $90^{\circ}$ was insignificant. The additional numerical studies for various condition would be carried out for practical design guideline of inclined rockbolt.

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.703-710
• /
• 2010

Reinforced concrete beams of existing structure often encounter insufficient shear problems for various reasons. Application of steel plates is one of widely used methods for shear strengthening of reinforced concrete beams that are insufficient of shear capacity. This study presents test results on strengthening shear deficient RC beams by external bonding of vertical and diagonal slit type steel plates with anchor bolt. Test parameters are width, interval, angle and length of slits with anchor bolt. The purpose was to evaluate the failure modes and shear capacities for RC beams strengthened by various slit type steel plates with anchor bolt. The results showed that the slit type steel plate specimens strengthened by adhesive bonding and bolting failed in shear fracture modes at maximum load. Flexural crack first occurred on the tension face of beam and then inclined cracks occurred on the shear span. Finally, slit type steel plates strengthened by adhesive bonding and fastening bolts managed to delay abrupt debonding and didn't detach fully from main body of RC beam.

• Korean Journal of Weed Science
• /
• v.16 no.4
• /
• pp.301-308
• /
• 1996

In this study, a propagation characteristics of green kyllinga(Kyllinga brevifolia var. leiolepsis H.) was investigated. Two to three rhizomes(1st rhizome) arised from the basal part of main shoot at 4th leaf stage and were grown to extend on the soil surface. Then new shoots(lst tillers) emerged from every node of the 1st rhizome. Second rhizomes also arised from the basal part of lst tiller at the time of 4th leaf openning. With such a regularity, 5th rhizomes and about 688 shoots were produced from one plant during one year-cultivation without competition under the natural condition. The degree of vegetative growth and seed formation was 3 times and 2.5 times higher in rhizomeoriginated plant than in that from seed, respectively. The amount of seed formation and the 1000 seeds weight was highest in one planted on June 1 and Aug. 1, respectively. Short-day treatment of less than 14hr appeared to be necessary for the induction of flowering and it was effective as treated not during germination but since at least 2 leaf stage of green kyllinga. Each shoot individually responded to short-day. When plants were exposed to short-day (9hr, day / 15hr, night) treatment at the stage of 2-3 leaves, more than 7 cycles were required for flowering induction. Bolting in main shoot occurred after emergence of 4 leaves under the short-day condition. Exogenous $GA_3$ slightly accelerated the velocity of bolting only in short-day condition.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.4
• /
• pp.276-283
• /
• 2023

Garlic (Allium sativum L.) is one of the most important vegetables used in various foods in Korea and many countries. The growth of garlic is influenced by various abiotic factors such as cultivation temperature, humidity, minimum temperature duration, and photoperiod. This study investigated the effects of increasing temperatures on the plant growth of the northern- ecotype garlic 'Uiseong' in a temperature gradient tunnel. As a result, temperature increase led to decreases in the bulb diameter, weight, and clove pieces of garlic. The rise of cultivation temperature increased the occurrence rate of incomplete bolting in the Northern-ecotype garlic 'Uiseong', resulting in decreases in productivity and a decrease in the yield of marketable garlic, indicating that temperature increases affect the development of garlic bulb formation. The findings of this study are expected to contribute as foundational data for understanding the growth responses of the northern-ecotype 'Uiseong' to increasing cultivation temperatures. The results of this study can be used to develop designing garlic growth models. In addition, the results of this study can improve understanding the interaction between increased temperature and garlic growth.

• Horticultural Science & Technology
• /
• v.29 no.4
• /
• pp.293-297
• /
• 2011

This experiment was conducted to elucidate the effects of mulching materials and removing time of the transparent polyethylene (PE) film on the growth of garlic at Uiseong experimental field, Korea. The experimental mulching materials comprised of transparent polyethylene film (0.025 mm) and net polyethylene (NPE). Plant height and leaf number of garlic were highest at PE treatment when the PE removing date was March 18 and this treatment also promoted the no. of cloves. Length of leaf sheath and bolting rate were highest and bulb weight loss rate was lowest at PE + NPE treatment when the PE removing date was March 18. But clove number was the lowest in this treatment compared to conventional PE film treatment. Conventional mulching method accelerated secondary growth rate but bulb weight loss was vice versa. There were statistically no differences in bulb diameter among treatments but conventional treatment positively focused on bulb diameter. Whenever PE film remove can suppress weeds compared to no mulching treatment but the dry weight of weeds were increasing trends as the removal dates of PE film were delayed. Transparent PE or PE + NPE treatments can be recommended to grow best quality garlic when PE film removing date is March 18.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.69-82
• /
• 1992

Vibration of intake menifold is important as it could worsen the noise levels radiated from surface itself and support bracket, and it eventually leads to the failures of a Throttle Position Sensor and an Idle Air Control Valve. In this study, structural modification method is proposed to reduce structural vibration of an intake manifold system. At first, vibration problems are identified through tests on a running engine. Then modal data acquired by modal testing and finite element analysis are helpful to understand vibration mechanism of the system, and used as the design guide when structural modifications are attempted. After the system model is validated by comparison of the modal data obtained from analysis and experiment, iterative calculations are performed to find optimized structure of the system by finite element analysis. As a result, a newly designed plenum bracket is suggested in such a way that the intake manifold is stiffened, and that design of the support bracket is suggested in such a way that the intake manifold is stiffened, and that design of the support bracket is changed in terms of bolting position, thickness, shape, and minimum weight increase. Finally, it is shown that a new design achieves a significant reduction of vibration of an intake manifold system and it is confirmed by tests on a running engine.