• Physical Therapy Korea
• /
• v.14 no.3
• /
• pp.41-47
• /
• 2007

Dance movements consist of combinations of movements such as jumping, rotation, maintaining balance, leg lifts, and plantar flexion with toe shoes. Dance movements require great muscle strength of lower extremities as well as muscular endurance. The purposes of this study were to investigate correlation between the anthropometric variables and the peak torque in young female dancers and to identify variables that affect isokinetic peak torque. Twenty-six female dancers ($19.7{\pm}1.2$ years of age) performed concentric maximum force efforts on the knee extensors and flexors at $60^{\circ}/sec$ and $120^{\circ}/sec$, the ankle plantar flexors (PF) and dorsiflexors (DF) at $30^{\circ}/sec$ and $120^{\circ}/sec$. Antropometric variables such as age, height, weight, body mass index (BMI), thigh girth, calf girth and duration of dance training were measured. To identify antropometric variables related to muscle strength, Pearson correlations were computed and a stepwise multiple regression analysis was performed. Pearson correlation coefficients of Knee extensor at $60^{\circ}/sec$ and $120^{\circ}/sec$ revealed moderate positive associations with BMI and thigh girth. Pearson correlation coefficients of ankle PF revealed low-to-moderate positive associations with height. Ankle DF also revealed moderate positive associations with BMI and calf girth. The main predictor variables of knee extensor at 60/sec, were stepwise multiple regression, age, height, thigh and girth.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.3
• /
• pp.267-276
• /
• 2020

Manufacturing workers are easily exposed to the risk of musculoskeletal disorders caused by repetitive tasks in their working environment. This is due to problems with occupational characteristics that repeatedly use the body. However, the current lack of monitoring systems for monitoring and prevention has led to an increase in workers' exposure to risks each year. This paper presents how to solve these problems in real working environment by producing wearable devices using IMU sensors. After wearing a wearable type device, the user's movement is judged through data analysis by receiving the rotation value according to musculoskeletal movement. At this time, the risk is determined by measuring the number of rotations of the user by eliminating bias and eliminating cumulative error, acquiring sophisticated data, and analyzing it in the form of dynamic threshold values. Using the wearable device proposed in this paper, the effect of this method could be checked through a web page measuring the number of rotations for elbow musculoskeletal disorders.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.1-2
• /
• 2000

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the onventional rotating barrel, vibrational barrel(vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components. The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed thatbthe average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value. Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components. However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. 2H20 + e $\rightarrow$M/TEX> 20H + H2.. Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure there by resulting to bad plating condition.

• Smart Media Journal
• /
• v.5 no.1
• /
• pp.38-43
• /
• 2016

As smart environment is spread out in our living environments, the needs of an approach related to Human Computer Interaction(HCI) is increases. One of them is head pose estimation. it related to gaze direction estimation, since head has a close relationship to eyes by the body structure. It's a key factor in identifying person's intention or the target of interest, hence it is an essential research in HCI. In this paper, we propose an approach for head pose estimation with pre-defined several directions by random forest classifier. We use canny edge detector to extract feature of the different facial image which is obtained between input image and averaged frontal facial image for extraction of rotation information of input image. From that, we obtain the binary edge image, and make two accumulated histograms which are obtained by counting the number of pixel which has non-zero value along each of the axes. This two accumulated histograms are used to feature of the facial image. We use CAS-PEAL-R1 Dataset for training and testing to random forest classifier, and obtained 80.6% accuracy.

• Journal of the Korean Society of Safety
• /
• v.20 no.3 s.71
• /
• pp.188-196
• /
• 2005

Accident reports from 1991 to 2000 of a steel company were used to analyze which factors induce industrial accidents. The subjects were 8,311 blue-collar workers, who sustained 114 occupational injuries and work on a continuous full-day 3-team 3-shift system of backward rotation(mornings to afternoons to nights). With respect to marital status, the occupational injury rate(OIR) on the married workers was significantly higher compared to unmarried workers. With respect to no, the OIR of those in their early 20s was significantly higher when compared to other age groups. The OIR of highly educated workers showed a reduction when compared with lower educated workers. The OIR of shift workers were significantly higher compared with the daytime workers. The OIR of type of work decreased across the steel manufacturing process, rolling process, machine maintenance section forwarding products section to the field management section. With respect to the block of shift work(morning, afternoon, and night shifts) by the type of work, the OIR of the night shift was higher than those of the morning shift in the steel manufacturing process or forwarding products section. The OIR of the machine maintenance section was slightly higher in the morning shift than those of the night shift. The OIR of the time of day of the shift workers reached a peak between 09:00 and 11:00. The OIR of a slight injury to shift workers decreased across the night, afternoon, to morning shifts whereas the OIR of a serious injury tended to decrease across the night, morning, to afternoon shift. The body parts most commonly injured were the arm and the crus.

• Tribology and Lubricants
• /
• v.31 no.6
• /
• pp.302-307
• /
• 2015

The use of turbocharger in internal combustion engines has increased as it is a key components for improving system efficiency without increasing engine size. Because of increasing demand, many studies have evaluated rotordynamic performance so as to increase rotation speed. This paper presents a linear and nonlinear analysis model for a turbocharger rotor supported by a floating ring bearing. We constructed rotor model by using the finite element method and approximated bearings as being infinitely short. In the linear model, we considered fluid film force as stiffness and damping element. In nonlinear analysis, calculation of the fluid film force involved solving the time dependent Reynolds equation. We verified the developed model by comparing the results to those of previous research. The analysis results show that there are four unstable modes, which are rigid body modes combining ring and rotor motion. As the rotating speed increases, the logarithmic decrement shows that certain unstable modes goes into the stable area or the stable mode goes into the unstable area. These unstable modes appear as sub-synchronous vibrations in nonlinear analysis. In nonlinear analysis frequency jump phenomenon demonstrated in several experimental studies appears. The analysis results also showed that frequency jump phenomenon occurs when the vibration mode changes and the sequence of unstable mode matches the linear analysis result. However, the natural frequency predicted using linear analysis differs from those obtained using nonlinear analysis.

• Journal of the Korean Society of Radiology
• /
• v.7 no.4
• /
• pp.271-275
• /
• 2013

Shoulder bone scan everyday life, sports activities at the side of the shoulder joint, or applying strong force in the lateral occurs. Mainly on upper arm abduction, temple, other rotational dislocation of the shoulder joint gahaejyeo as useful for observing the presence or absence of lesions is used. Shoulder PA oblique projection prevent distortion of the image due to the angle and the most useful diagnostic radiological investigate shooting angle. Shoulder blade body and the acromion and coracoid process Y-view is formed characters. $10^{\circ}$ angle between the shoulder blades and the acromion is the obstruction. $20^{\circ}{\sim}25^{\circ}$ to the Y-view of the humerus head looks superimposed, the position of the shoulder joint and seemed appropriate. $35^{\circ}$ of the humerus head superimposed on the Y-view, but above the humerus head and shoulder joints were distorted. When $45^{\circ}$ elevation observed on the side of the best has come Y-view also acromion and coracoid process is finished.

• Journal of Korean Neurosurgical Society
• /
• v.53 no.6
• /
• pp.331-336
• /
• 2013

Objective : The offset connector can allow medial and lateral variability and facilitate intralaminar screw incorporation into the construct. The aim of this study was to compare the biomechanical characteristics of C7 intralaminar screw constructs with and without offset connector using a three dimensional finite element model of a C6-7 cervical spine segment. Methods : Finite element models representing C7 intralaminar screw constructs with and without the offset connector were developed. Range of motion (ROM) and maximum von Mises stresses in the vertebra for the two techniques were compared under pure moments in flexion, extension, lateral bending and axial rotation. Results : ROM for intralaminar screw construct with offset connector was less than the construct without the offset connector in the three principal directions. The maximum von Misses stress was observed in the C7 vertebra around the pedicle in both constructs. Maximum von Mises stress in the construct without offset connector was found to be 12-30% higher than the corresponding stresses in the construct with offset connector in the three principal directions. Conclusion : This study demonstrated that the intralaminar screw fixation with offset connector is better than the construct without offset connector in terms of biomechanical stability. Construct with the offset connector reduces the ROM of C6-7 segment more significantly compared to the construct without the offset connector and causes lower stresses around the C7 pedicle-vertebral body complex.

• Journal of Astronomy and Space Sciences
• /
• v.38 no.3
• /
• pp.157-164
• /
• 2021

We describe a method for the in-orbit calibration of body-mounted magnetometers based on the CHAOS-7 geomagnetic field model. The code is designed to find the true calibration parameters autonomously by using only the onboard magnetometer data and the corresponding CHAOS outputs. As the model output and satellite data have different coordinate systems, they are first transformed to a Star Tracker Coordinate (STC). Then, non-linear optimization processes are run to minimize the differences between the CHAOS-7 model and satellite data in the STC. The process finally searches out a suite of calibration parameters that can maximize the model-data agreement. These parameters include the instrument gain, offset, axis orthogonality, and Euler rotation matrices between the magnetometer frame and the STC. To validate the performance of the Python code, we first produce pseudo satellite data by convoluting CHAOS-7 model outputs with a prescribed set of the 'true' calibration parameters. Then, we let the code autonomously undistort the pseudo satellite data through optimization processes, which ultimately track down the initially prescribed calibration parameters. The reconstructed parameters are in good agreement with the prescribed (true) ones, which demonstrates that the code can be used for actual instrument data calibration. This study is performed using Python 3.8.5, NumPy 1.19.2, SciPy 1.6, AstroPy 4.2, SpacePy 0.2.1, and ChaosmagPy 0.5 including the CHAOS-7.6 geomagnetic field model. This code will be utilized for processing NextSat-1 and Small scale magNetospheric and Ionospheric Plasma Experiment (SNIPE) data in the future.

• Physical Therapy Rehabilitation Science
• /
• v.10 no.3
• /
• pp.244-250
• /
• 2021

Objective: The purpose of this study was to investigate the effect of sprinter pattern bridging exercise using theraband on activation of lower extremity and abdominal muscle and to find out postures that can effectively improve abdominal and lower extremity muscle strength and increase abdominal stability. Methods: This study was designed as a cross-sectional study. The following research was done with applicants attending S university in Seoul to compare the difference in muscle activity between one-leg-Support bridging exercise and sprinter-pattern bridging exercise using theraband. For 48 study participants, we first measured their MVC. Then, we applied one-leg-support bridging exercise and sprinter-pattern bridging exercise at random order. These data were expressed as the percentage of maximal voluntary contraction (%MVC).Electromyography analysis was performed by measuring the external obliques, internal obliques, biceps femoris, and gluteus maximus. Results: There was a statistically significant increment of muscle activity in external and internal oblique muscle(p<0.001)by sprinter-pattern bridging exercise using theraband. On the lower body, statistically significant increment of muscle activity in biceps femoris and gluteus maximus was found(p<0.05). On the other hand, on erector spinae, there was statistically significant decrease in muscle activity(p<0.05). Conclusions: Efficient treatment is expected when sprinter-pattern bridging exercise using theraband is applied clinically.For patients with chronic knee and ankle pain who have difficulty bearing weight, including low back pain and internal rotation of the femur, starting with a low weight bearing, we think it will be helpful in planning systematic training aimed at progressively strengthening the lower extremities.