• 산업경영시스템학회지
• /
• 제20권44호
• /
• pp.323-332
• /
• 1997

This study evaluated the compression force at the L5/S1 disc using EMG(Electromyography). EMG signals were analyzed under the condition of fixed vertical factor (20Cm∼80Cm), two horizontal factors (35Cm, 55Cm), and two weight factors (10Kg, 25Kg) 2 times per minute for each posture. Also, the result was compared with the compression force of each posture which computated by the equation of NIOSH(National Institute for Occupational Safety and Health) guide to manual lifting(1991). The experimental result show that EMG signals have more an effect on the Weight than the Horizontal factors. Also, there are not significant differences on the analysis result of EMG signals between Health members and not, because the body buildings which doing Health members are not enhanced the motor unit due to the MMH(Manual Material Handing).

• Physical Therapy Rehabilitation Science
• /
• 제5권3호
• /
• pp.138-142
• /
• 2016

Objective: The purpose of this study was to investigate how light touch with a finger affects balance ability when a posture is maintained in the condition of visual information blockage and to provide a fundamental material for developing balance ability in the process of rehabilitation treatment. Design: Cross-sectional study. Methods: The study subjects were 17 healthy men and women in their twenties and thirties who were studying at S University in Seoul. The system was comprised of an equilateral triangular force platform. Subjects were asked to step on the foot position of the force platform (Good Balance, Finland) barefooted for 30 seconds, with eyes closed, hands hanging down loosely, and feet comfortably apart. It was connected to a laptop by using Bluetooth technology. An experiment was conducted in the following three circumstances: 1) no-touch trial, 2) light touch to the back (T7 area), and 3) light touch to the middle finger of the left hand. Each subject was given a 10-minute break between consecutive measurements. The experimental circumstances were performed randomly. Anteroposterior sway (APSV), mediolateral sway velocity (MLSV), and velocity moment (VM) were measured. Results: The APSVs (mm/s) were $9.32{\pm}3.37$ and $5.45{\pm}2.98$; the MLSVs (mm/s), $6.39{\pm}3.35$ and $3.31{\pm}2.48$; and VM ($mm^2/s$), $17.13{\pm}11.75$ and $6.76{\pm}8.31$ in the first and second experimental circumstances, respectively. APSV, MLSV, and VM values were significantly improved with the 1) no-touch trial and 2) light touch to the back trail conditions compared with the 3) light touch to the middle finger of the left hand condition (p<0.05). Conclusions: This study revealed that the balance ability for maintaining a body posture was influenced more by light touch to the back (T7) than by light touch with the sensitive fingertip and body sway diminished after visual information was blocked.

• 한국통신학회논문지
• /
• 제28권2C호
• /
• pp.162-171
• /
• 2003

키프레임 애니메이션 기법에 비해 보다 사실적이고 효율적인 작업을 가능하게 한 동작 포착 기법에 의한 동작데이터는 편집의 어려움으로 인해 재사용이 용이하지 못하다는 문제를 가진다. 본 논문에서는 효과적인 동작 포착데이터 편집 기법으로써 비감독 학습 기반의 균등 자세 지도(uniform posture map: UPM)를 이용한 동작 편집 기법을 제안한다. 다른 동작 편집 알고리즘들에 비하여 UPM 알고리즘은 상대적으로 적은 계산량을 요구하여 실시간 적용에 용이하며, 특히 자기 조직 지도(self-organizing map: SOM) 알고리즘을 이용한 동작 편집을 할 때, 실제로 존재하지 않은 자세가 포함될 수 있는 가능성을 학습 단계에서 제거함으로써 자세 생성에 있어서 안정성을 확보할 수 있다. 또한 제약조건이 많은 복잡한 대상체에 대한 적용에 있어서 제약조건의 수에 비례해서 계산량이 증가하는 기존 알고리즘의 약점을 보완한다. 본 논문에서는 UPM 알고리즘을 이용한 동작 편집 기법의 응용으로서 동작 전이 분야와 역운동학 분야에서의 적용 사례를 보였다. 본 논문의 제안 알고리즘은 가상 현실이나 컴퓨터 애니메이션, 게임들의 분야에 다양하게 적용될 수 있다.

• The Journal of Korean Physical Therapy
• /
• 제36권2호
• /
• pp.71-77
• /
• 2024

Purpose: The prolonged use of digital devices has led to the widespread adoption of poor postures, particularly rounded shoulder posture (RSP), associated with shoulder impingement and pain. This study investigates the effects of neuromuscular electrical stimulation (NMES) on RSP in healthy adults. Methods: Thirty adults with RSP were randomly assigned to NMES only, exercise only, or NMES with exercise groups. NMES was applied to the lower trapezius, which was the target muscle in this study, for a total of 2 weeks, 5 times per week, 20 minutes per session. The exercise program included pectoralis minor stretching, wall-slide exercise, dynamic hug exercise with band, and Brugger stretching for upper body with band, which were performed for a total of 2 weeks, 5 times per week, 20 minutes per session. Outcome measures, including the Supine Method (SM) for posture and surface electromyography (EMG) of the lower trapezius for muscle activity, were assessed before the intervention, after 5 sessions, and after 10 sessions. Results: All the groups showed significant changes in the SM and % maximal voluntary isometric contraction (%MVIC) over time (p<0.05). The NMES group had significantly reduced SM at 1 week, while the exercise and combined groups had reduced SM at 2 weeks (p<0.017). All the groups had increased %MVIC at 2 weeks (p<0.017), with no significant differences observed between groups. Conclusion: NMES alone can be as effective as exercise in improving RSP. NMES combined with exercise also showed positive outcomes, thus offering diverse treatment options for this condition.

• 대한인간공학회지
• /
• 제18권3호
• /
• pp.13-26
• /
• 1999

126 male and 95 female Korean college students were examined for Scoliosis by using Moire type body observation apparatus. Scoliotic hump measuring instrument, and spinal cord side curvature condition measuring instrument. The prevalence rate of Scoliosis along with identifying its possible causal factors and characteristics were investigated. The results revealed that 5.56% of male and 8.42% of female students(male to female ratio 1:1.47) were suspected as having Scoliosis. There was a significant correlation between the students who have symptoms of Scoliosis and their physiological measurements(e.g., lower breathing capacity of the lungs). There were also close relationships between the suspected cases and their habits(e.g., poor sitting and sleeping posture). It is concluded that the Scoliosis in Korean college students should not be ignored.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.171.5-171
• /
• 2001

Information that is acquired by adhered sensors on a body has been commonly used for the three-dimensional real-time motion capture algorithm. This paper describes realtime motion capture algorithm using computer vision. In a real-time image sequence, human body silhouette is extracted use a background subtraction between background image and the reference image. Then a human standing posture whether forward or backward is estimated by extraction of skin region in the silhoutte. After then, the principal axis is calculated in the torso and the face region is estimated on the principal axis. Feature points, which are essential condition to track the human gesture, are obtained ...

• 제어로봇시스템학회논문지
• /
• 제8권6호
• /
• pp.477-483
• /
• 2002

This paper deals with a workspace analysis of multi-legged walking robots in velocity domain(velocity workspace analysis). Noting that when robots are holding the same object in multiple cooperating robotic arm system the kinematic structure of the system is basically the same with that of a multi-legged walking robot standing on the ground, we invented a way ot applying the technique for multiple arm system to multi-legged walking robot. An important definition of reaction velocity is made and the bounds of velocities achievable by the moving body with multi-legs is derived from the given bounds on the capabilities of actuators of each legs through Jacobian matrix for given robot configuration. After some assumption of hard-foot-condition is adopted as a contact model between feet of robot and the ground, visualization process for the velocity workspace is proposed. Also, a series of application examples will be presented including continuous walking gaits as well as several different stationary posture of legged walking robots, which validate the usefulness of the proposed technique.

• 중환자간호학회지
• /
• 제11권1호
• /
• pp.79-88
• /
• 2018

Purpose : This study was performed to evaluate the effects of a prolonged a $30^{\circ}$ side-lying position on comfort and skin condition by applying the trunk maintenance repositioning method, which can keep the $30^{\circ}$ side-lying position effective for preventing pressure ulcers. Method : Fifty-four healthy nurses working at a general hospital in Seoul were randomly assigned to an experimental group (n=27) or a control group (n=27) and assumed a position of lying on their right or left side for two hours. The trunk maintenance repositioning method was applied to the experimental group using the pillow made by the researcher, while the original repositioning method was applied to the control group using the regular pillow from the subject hospital. Participants' posture angles, comfort, and skin condition were measured at the time of the intervention, as well as at one and two hours after the intervention. Results : There was no statistically significant difference in position angle, comfort, skin condition change, or sacrum and greater trochanter pressure change between the two groups over time. Conclusion : It is necessary to review the method and frequency of change of position in each hospital. In addition, a proper position changing pillow should be developed in consideration of patients' various body shapes.

• 한국안전학회지
• /
• 제31권4호
• /
• pp.111-119
• /
• 2016

This study aimed to analyze postures that were frequently conducted in manufacturing industry. To find grip strength and muscle activities of each posture, Maximum Voluntary Contraction (MVC) and ElectroMyoGraphy (EMG) were measured. Based on the results of this study, the most appropriate posture could be suggested and used as a basic information for preventing musculoskeletal disorders. Most work-related musculoskeletal disorders have been occurred in the fields of manufacturing industry. According to previous studies, it was reported that the rate of musculoskeletal diseases of upper extremity was higher than that of other body parts. Accordingly, there were many studies about discomfort and grip strength of upper extremity. However, these studies dealt with single selection of wrist, elbow and shoulder. So, it was insufficient for comprehensive studies about upper extremity. And in order to improve the work posture, the physiological changes being generated by the combination of wrist, elbow and shoulder postures should be observed and analyzed. In order to conduct this study, thirty university students who had no records of MSDs involved were recruited. Independent variables were postures of wrist(pronation, neutral, supination), postures of elbow(flexion $45^{\circ}$, $90^{\circ}$) and postures of shoulder(flexion $0^{\circ}$, $90^{\circ}$). And dependent variables were MVC values and EMG values. Jamar dynamometer and TeleMyo 2400T G2 was used to measure MVC and EMG. MVC and EMG for 12 postures were measured for three second and for three times. Experiment was performed randomly. A 10 minutes rest period was provided after each t. To measure muscle load, the EMG signals of eight muscles (Biceps, Medial triceps, Lateral triceps, Brachioradialis, Extensor carpi ulnaris, Extensor carpi radialis, Flexor carpi ulnaris and Flexor carpi radialis) were evaluated. MVC values and EMG values were analyzed using Minitab ver. 14. The results showed that MVC value was the highest at shoulder $0^{\circ}$, elbow $45^{\circ}$ and wrist supination. In case of wrist postures, MVC of supination is the highest. In case of elbow and shoulder postures, MVC of flexion $45^{\circ}$ and $0^{\circ}$ was the highest. It was found that there were interaction between wrist and elbow posture under shoulder flexion and between shoulder and wrist under elbow flexion $45^{\circ}$. In case of the angle of shoulder $0^{\circ}$, elbow $45^{\circ}$ and wrist supination, the EMG values of four muscles(Medial Triceps, Extensor carpi ulnaris, Extensor carpi radialis, Flexor carpi ulnaris) were the highest. Based on this study, it is worth to note that the combination postures of upper extremity have a large impact on the MVC and EMG. The optimal condition upper extremity was shoulder flexion $0^{\circ}$, elbow flexion $45^{\circ}$ and wrist supination for preventing work-related musculoskeletal disease.

• 한국의류산업학회지
• /
• 제17권4호
• /
• pp.597-603
• /
• 2015

This study investigates the actual domestic and overseas cyclewear wearing conditions for male high school cyclists. The study results provide factors and degree of dissatisfaction as basic data for cyclewear development. This study was conducted on 35 male high school cyclists (freshman to seniors) by a questionnaire and interview method. Study results were: Male high school cyclists considered functionality as most important when they bought cyclewear and the brand they most often bought was a cheap domestic brand. Dissatisfaction with the crotch, thigh circumference and minimum leg circumference was higher than other parts during wearing. A cyclist is more sensitive to wear because they require more lower body motion than other parts. Cyclewear should be: less transformed even by frequent laundering, made of breathable material and use a sewing technique that minimizes air resistance and increases fit the body. Functional pads ergonomically designed with high tactile materials should be developed to prevent 'saddle sore' and groin soreness region that happens because of a lower body bending posture when cycling. A follow-up study is recommended to further develop excellence in cyclewear functionality and dimension suitability for male high school cyclists through the size system.