• Korean Journal of Human Ecology
• /
• v.16 no.5
• /
• pp.969-977
• /
• 2007

The research thesis has been intended to make a comparative analysis on the basic bodice pattern and basic skirt pattern changing on the basis of setting waist line of dress form in an effort to set reasonable standards in selecting the standard lines of drees form. The thesis has made the wearing evaluation by producing the sample of upper and lower dress based on A pattern and B pattern. In details, A pattern functions to keep waist line flatly down from lateral waist-right to posterior waist in a little curved state, paralleling bust line and hipline with waistline. And, B pattern functions to keep waistline, bust line and hipline horizontal paralleling with ground surface. SPSS win 10.1 program was used for the analysis of evaluation and t-test. The result is as follows: For basic bodice-front of upper dress, A and B patterns have made little significant difference. With regard to basic bodice-back, B pattern has got the higher evaluation than A pattern, in the pattern stability and appearance. For basic skirt pattern, A pattern has got the lower evaluation in the aspect of total back appearance, back dart, hip line, and waist line, and front drape. Basic bodice pattern of A pattern, which takes on the different horizontal standard lines of dress form depending on the selection of waistline, and basic skirt pattern has scored less in terms of pattern stability and appearance.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.6
• /
• pp.1193-1202
• /
• 1996

This study investigates and analyzes the amount and shape of the front waist dart of the bodice and investigates the dart division method by bust size. Measurements at 5 arm positions were taken from 15 subjects. Clothing tests were given to 6 of the subjects. The conclusions were as follows: 1) Front Body surface changes were occurred around armpit and they were caused by the wrinkles of the armpit 2) The curved dart line was more appropriate for use with C cup, the large bust body, than the linear line. The changes of the dart amount at arm movements had different types by bust size. 3) Patterns for A & C cup body were adequate to divide the dart amount by 3 darts such as under the B.P., under the anterior armpit and side line, or to aggregate to 1 dart under the B.P. For the B cup body, however, the suitable pattern to use was the total dart amount divided by 1~2 darts and decreasing the waist line at the side line should be avoided.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.4
• /
• pp.769-781
• /
• 1997

The purpose of this research is to show how to use the patternist's CAD system in order to make design patterns efficiantly. Using the PAD System Technologies company's PAD System Module, which is very officiant in designing patterns, the basic pattern or design pattern can be designed and applyed to the Sample Module, thus, then it could manufacture, retouch or choose a model, making it posible to go to the next level which is seam patterns for industrial use. By understanding the change of the design that is chosen through the design pattern making and Sample Module process', this study is presentated a plan on how to utilize the patternist's working adaption ability by the CAD system, and also considered the problems in using it. Ability of Design Confrontation of CAD System: 1) The result of an operation can be saved and retouched. On a saved list the patterns can be chosen and changed, thus, making it posible to complete a design very quickly. 2) When sewing every designed pattern in Sample Module, the model can be operated merely by selecting each sewing position, thus creating the same effect of a designer's muslin sample process in a much lesser time. Point at issue in the utilization CAD system: 1) When combining two darts into one place the amounts of darts that are already these have to be erasers, and then, the two darts points are moved that place, thus, containing them, which is very conplicated. 2) When making a gathering, because system can only be recognized in a opend line, the pattern should be separated in order to put a gathering inside a pattern. 3) In order to readjust the amounte of dart. The dart is erased first and then made new dart again. 4) When making tucks in a Sample Module, the form that gets narrow towards the pivot point can not be recognized so the sewing lines of the tucks is adjusted into parallel lines. 5) The Sample Module 3D operation can not attach the bodice to the shirts, instead they become fixed into each other. In the case of shoulder line tucks the amounts of pleats can not be expanded draperary naturally, thus, making it hard to showing the silhouette accurately. If these problems are solved, especially if the silhouette of a model can be created to have natural drapery in the 3D Module, models can be shown on the screen in possible to compare and examine even a change of a detail, by designing this 3D Module Production sample process will be more effective, thus, making the CAD system more useful in sewing design process.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.960-967
• /
• 2012

The study aims to design the corset type long-line bra patterns that compensate part-somatotype of women in their 20s. The corset type long-line research bra patterns consist of 4 sections: cup, front bodice, back bodice, and shoulder strap. The full cup is made up of 2 lower part pieces and 1 upper part piece, and the shoulder strap is 16 millimeters wide. The method to design the patterns is shown in figure 4 and figure 5. The result of wearing test showed that, while the wearing testers recognized some significant differences in 19 out of 26 criteria, the examiners did in 17 out of 23. The criteria more than 1 in an average value between research bras and commercial bras were 'appropriateness of breadth of shoulder strap', 'appropriateness of pressure of armhole circumference'. 'appropriateness of pressure of waist', 'suitability of side line and body curve', 'appropriateness of positional pressure of chest circumference', 'appropriateness of positional pressure of upper part line', 'appropriateness of positional pressure of bottom part line', and 'satisfaction of whole silhouette of side and back'. The research and commercial bras were evaluated 4.23 and 3.44 respectively by the testers, and 4.25 and 3.40 by the examiners. The former ones were scored higher by both parties. They were also appreciated higher in general silhouettes of fitting and appearance.

• Korean Journal of Human Ecology
• /
• v.10 no.4
• /
• pp.379-390
• /
• 2001

The purpose of this study is to investigate the fitness according to drafting method of the block patterns for women in Korea. The major findings of this study are as follows: 1. According to comparative analysis of required measurements, two measurements of back length and bust girth are used in Proportional Drafting Method (Munhwa). In case of Compromise Drafting Methods are used across chest, across back, bust length, bust width, full length in front, across shoulder and shoulder length in addition to back length and bust girth. The type of Armstrong as a Short Measure Drafting Method uses 10 measurements for the drafting the bodice. 2. While Esmod block pattern arid Armstrong's block pattern are the lightest in full width and other widths. Rasara block pattern is the most ample. In Lee, Myung-hee's block pattern and Lee, Hyung-sook's block pattern, amounts of drooping are decided $3{\sim}4cm$, but drooping amounts of other block patterns are decided corresponding to real measurements. While cap height in Esmod and Armstrong's sleeve patterns are directly measured Armhole length of the block pattern, cap height of other sleeve patterns are used armhole depth and cap height length as well as armhole length. 3. When analyzing to indirect measurements, Esmod block pattern shows the least different between full length of block pattern and that of body form. Munhwa block pattern and Kim, Hyosook's block pattern are mostly same to body form back length. However all of the block patterns are sheller than body form length. In case of Suh, Wansuk's block pattern, across back and across chest are same size, but other block patterns show difference between across back and across chest. Most block patterns' neck width in front and bach bodice are almost same. Front neck width is generally bigger than back neck width in some cases.

• Journal of the Korean Society of Costume
• /
• v.56 no.4 s.103
• /
• pp.48-64
• /
• 2006

The purpose of the study was to demonstrate how to recreate spencer jacket in the empire style in an attempt to apply this historic style to theatrical costumes and other high fashion items in modern times. The study was carried out through 2 steps. (1)Block patterns of spencer jacket of its basic design were developed through draping based on the design characteristics mentioned above. (2)Spencer jackets of three designs, which were the typical designs of each category have been made of velvet to find out more specific structural characteristics. The structural characteristics of Spencer jacket in draping were as follows: (1)Jacket length position was suitable 9cm below body's bust line and neckline should be enlarged front & side neck point 2cm, back neck point 1.5cm. (2)Cut out the front bodice after CF line moved 1cm outwards and bust dart amount should not exceed 2-3cm. Shoulder point moved inwards. (3)Side back grain line was parallel to princess line of the back bodice. Add 0.5cm ease to the under arm of the front and side bark bodice, it was good for the activity of arm. (4)Armhole line was trued as maintaining to across back width 14-15cm at least. Shoulder line was to connect from the point 2cm depart shoulder point along armhole line to point 2cm side neck point along neck line. (5)Sleeve length was suitable 70cm, cut out the bias direction to move forwards the grain line from shoulder point. Puff position was good from the 2cm depart shoulder point to shoulder line.

• Fashion & Textile Research Journal
• /
• v.8 no.5
• /
• pp.552-561
• /
• 2006

This study was conducted to suggest an appropriate jacket bodice pattern for elderly women by comparing the developed pattern with existing ready-made jacket pattern. The developed jacket bodice pattern was produced from the basic sloper in which elderly women's somatotype was fully reflected, by using the newly developed 3D pattern design system. Subjects were 6 elderly women aged from 60 to 69 who have average somatotype in their age group. This study carried out pattern analysis and self-sensory test with three ready-made jackets(national brands) and suggested a developed jacket pattern based on the results. According to the self sensory test results of ready-made jacket, wearing fitness among brands was significantly different even though those brands were same B91 size. The results of ready-made jackets' pattern analysis, size differences among patterns have influenced wearing fitness. The basic numerical formula for the jacket pattern considered elderly women's somatotype were as follows; $B/4+2{\pm}0.2{\sim}0.5$(difference of front and back), $W/4+2{\pm}0.2{\sim}0.5$(difference of front and back), H/4+2~7(ease amount), armhole depth B/4, chest width B/6+1, back width B/6+3 and back neck width B/12+0.5. According to the results of the developed jacket's appearance evaluation, it earned higher scores in silhouette and ease amount, confirming that the developed jacket is appropriate for the elderly women. Also, in the evaluation on space length, the developed jacket pattern was evaluated to allow proper space length in all around of measurement parts.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.5
• /
• pp.117-126
• /
• 2020

In this study, a 3D simulation program was used to produce a bodice prototype of a middle-aged male in their 40s and 50s and then analyze the appearance evaluation and airgap, sectional view, color distribution through virtual wearing to compare and analyze the differences between patterns. Through this, it was intended to provide basic data necessary for pattern development to companies that manufacture and produce clothing for middle-aged men. As a result of analyzing, J pattern was analyzed as the most suitable body shape pattern for middle-aged men. E pattern was too tight and L pattern and N pattern had too much spaces. However, J patternt was analyzed that correction was necessary in setting center back and center front length. The aging phenomenon in which the back is slightly bent forward and shoulders are also inclined is expected to appear, so it is necessary to adjust the front-to-back length, shoulder angle, and shoulder length. It is considered that after developing the research pattern by modifying J pattern, it is necessary to develop a body shape prototype for middle-aged men through actual clothing experiments on middle-aged men.

• Journal of Fashion Business
• /
• v.17 no.2
• /
• pp.63-81
• /
• 2013

A Study using compare and analyze about differences among three patterns(shape and size of pattern, fitting and amount of air gap and so on) through 3D simulation. This study use 3D simulation program, DC Suite version 3.0. The results are as a follows: The results of estimation about total appearance, the pattern of Bunka is best of all pattern about total fitting and silhouette of front and back side. The pattern of armstrong and on&on stand low in estimation. As the total fitting, the pattern of Bunka is 4.40, the pattern of Armstrong is 2.60 and the pattern of On&on is 1.60. The result show better pattern of Bunka than pattern of Armstrong and On&on. When we examine about space between body and cloth, the pattern of Bunka is best. The pattern of Armstrong don't have problems about back side but front side have some problem of getting loose. Because it only have a waist dart so dart size is too big. The pattern of On&on have so much space because it don't have a waist dart. On the amount of air gap, the pattern of Bunka squash up body so it have the amount of air gap 0.08 at bust circumference and underbust circumference. Next is the pattern of Armstrong, amount of air gap is 0.14 at bust circumference and 0.23 at underbust circumference. The pattern of On&on's amount of air gap is 0.30 at bust circumference and 0.37 at underbust circumference. So the pattern of Bunka is bodice block of the best closing adhesion and the On&on is a loose-fitting pattern.

• Journal of the Korean Society of Costume
• /
• v.29
• /
• pp.117-126
• /
• 1996

As the current stage of the fashion begins to follow the styles of the past the study on the past costume is getting more importance and as the methodolgy of the study the accu-rately approached study through the rehabili-tation of the past cosume is more needed than the simple rearrangement of the historical documents. By this methodology this study can be positioned as a re-creation activity. The results of the study are as follows. 1) Style: The general silhouette is the style to emphasize the waist and to widen skirt at the lower part of the body. The front shows hourglass silhouette but the side shows S-line silhouette. The dress is two-piece composed of bodice and skirt. 2) Color and Fabric: The main color is dull powder blue end the sub color is ivory. The dress is made of wool crepe and cotton and partly silk crepe satin and taffeta. 3) Pattern and sewing: The dress is combined with lining and fabrics, The patterns. or overbodice. The skirt is gored skirt. The skirt is gored skirt. The dress has various effect not only to decorate but also to conceal seams support hemlines nd affect the depth and length of front panel. 4) Datail: The braid black velvet ribbon frill and tucks in bodice skirt sleeves front panel collar cuffs are repeatedly used to dec-orate the dress. Finally the 1902-3 day dress has the characteristics of transitional stag in which the chatacteristics of the costume of 1900s and the remnants of the characteristics of the pre-vious costume style and shows the charac-teristics of day dress well in terms of the style color and fabric pattern and sewing and detail.