• 한국표면공학회지
• /
• 제40권2호
• /
• pp.103-106
• /
• 2007

We have investigated the optical and electrical properties of surface mounted white light emitting diode (LED) chips prepared by using yellow phosphors on the blue LED chip. The yellow phosphor mixed with transparent epoxy was coated on the prepared LED chip. The optimum mixing conditions with epoxy and yellow phosphor is obtained at the mixing ratio of epoxy:yellow phosphor = 97:3 wt%. The maximum luminance and light emitting efficiency are above $80,000cd/m^2$ and 23.2 lm/W, respectively, at the bias voltage of 2.9 V. There was no distinct change in the luminance strength with changing of the yellow phosphor ratios. The current of the white LED chip is about 30 mA at 2.9 V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.636-639
• /
• 2004

We have synthesized a $Eu^{2{\cdot}}$ -activated $Sr_3MgSi_2O_8$ blue phosphor and $Ba^{2{\cdot}}$ co-doped $Sr_2SiO_4$ yellow phosphor investigated an attempt to develop white LEDs by combining it with a GaN blue LED chip. Three distinct emission bands from the GaN-based LED and the ($Sr_3MgSi_2O_8$:Eu + $Ba^{2{\cdot}}$ co-doped $Sr_2SiO_4$:Eu) phosphor are clearly observed at 405nm, 455 nm and at around 540 nm, respectively. These three emission bands combine to give a spectrum that appears white to the naked eye. Our results show that GaN (405 nm chip)-based ($Sr_3MgSi_2O_8$:Eu + $Ba^{2{\cdot}}$ co-doped $Sr_2SiO_4$:Eu) exhibits a better luminous efficiency than that of the industrially available product InGaN (460 nm chip)-based YAG:Ce.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.438-440
• /
• 2005

At present, characteristic of high color reproduction for LCD TV is needed in Display market according to start mass production of LCD TV. Therefore development target for LCD is focused on improvement of color reproduction. The improving methods of high color reproduction are alteration of color Filter or Red, Green, Blue phosphor alteration of CCFL. But decrease of luminance and panel transmittance is caused by alteration of Color Filter. Accordingly, we completed LCD with high color reproduction by the most suitable emission spectrum of CCFL phosphor at panel with conventional color filter. In this experiment, we knew that LCD applied to CCFL with high color rendering characteristic had color reproduction range of 81% compared with NTSC in CIE color coordinate. According to increase of intensity peak and alteration of Red, Green, Blue phosphor spectrum, we made LCD with high color reproduction characteristic. In conclusion we achieved improvement of color reproduction ratio by alteration of CCFL phosphor without changing color filter.

• Journal of the Optical Society of Korea
• /
• 제11권2호
• /
• pp.67-70
• /
• 2007

A Wide Color Gamut Backlight system was studied using a three-band white Light-Emitting Diode. A three-band white light-emitting diode (LED) was fabricated using an InGaN-based blue LED chip that emits 445-nm blue peak, and a green phosphor and red phosphor that emit 535-nm green and 621-nm red peak emissions, respectively, when excited by 450-nm blue light. Using for this three-band white LED, wide color gamut backlight unit (BLU) was attained. The luminance of BLU and CIE 1931 chromaticity coordinates was $1,700Cd/m^2$ and (0.337, 0.346). Color filter matching simulations for this configuration show that the three-band white LED backlight can be enhanced by up to 16% over conventional white LED backlight color gamut.

• 한국전기전자재료학회논문지
• /
• 제36권5호
• /
• pp.494-499
• /
• 2023

In this paper, in order to apply the CF (color filter) type of the micro light emitting device (Micro LED) display method, a study on the manufacturing process of red and green phosphor inks for the inkjet process was conducted. The blue light-emitting KSF and LuAG phosphors were respectively used to control the phosphor particle size to about 1㎛, and a phosphor ink was prepared by synthesizing with a low-viscosity solution (IPA/Eg). A chemical dispersion method was applied to selectively control the dispersion characteristics in the manufacture of phosphor inks, and in particular, phosphor inks with a dispersant applied a dispersant secured stable dispersion characteristic compared to phosphor inks without a dispersion process. Therefore, it seems possible to manufacture CF for Micro LED through an inkjet process capable of controlling the dispersion characteristics of phosphor ink.

• 한국진공학회지
• /
• 제21권3호
• /
• pp.164-170
• /
• 2012

청색 발광다이오드(LED) InGaN/GaN의 방사 피크 파장에 따른 LED 소자의 성능 저하를 광학적 및 전기적 특성을 고려하여 조사하였다. 방사 피크 파장이 437~452 nm인 LED 소자에 전류를 각각 60 mA, 75 mA, 그리고 90 mA로 구동하여 장시간 동안 스트레스를 주었다. 형광체의 유무에 따라서 LED 소자의 광 감쇠 특성을 관측하였다. 형광체가 없는 소자의 광 감쇠 특성은 피크 파장이 단파장일수록 급속하게 떨어진다. 형광체가 있는 소자는 형광체가 없는 것보다 감쇠 특성이 둔감해진다. 전기적 특성은 방사 피크 파장에 의존하지 않고, 스트레스 시간에 따른 LED의 내부 저항이 서서히 증가하는 현상으로 나타난다. 피크 파장에 따른 외형변화는 동일 전류 조건에서 단파장일 때 열화현상이 심하게 발생한다. 이는 청색 발광다이오드에서 발생한 빛의 파장이 단파장영역으로 갈수록 칩 외의 재료에서 단파장 광 흡수가 증가하여 열화현상이 가속화되는 것으로 분석된다. 따라서 LED 소자의 장수명을 얻기 위해서는 청색 칩의 방사 피크 파장과 소자재료의 광 열화해석이 중요하다.

• 한국광학회지
• /
• 제25권4호
• /
• pp.216-220
• /
• 2014

UV용 청색 형광체 $CaMgSi_2O_6:Eu^{2+}$를 환원 분위기 속에서 고상반응법(Solid-state reaction)으로 합성하였다. 합성된 형광체의 결정성을 확인하기 위해 X-선 회절(X-ray diffraction) 패턴 측정결과 C2/c(15)의 공간군과 단사정계(Monoclinic) 구조를 가지는 JCPDS No.75-1092와 일치하는 단일상임을 확인하였다. 광 여기 및 발광 스펙트럼을 통하여 350 nm 부근에서 최대 흡수치가 나타나며, 450 nm의 청색 발광을 보인다. 이는 $Eu^{2+}$이온의 $4f^7-4f^65d$의 천이에 기인한다. 온도에 따른 형광체의 발광 스펙트럼을 확인한 결과 $100^{\circ}C$에서 54%의 휘도 유지율을 보였다. 상기 합성된 $CaMgSi_2O_6:Eu^{2+}$와 400 nm의 Ultra Violet 발광 다이오드를 이용하여 상용 녹색, 적색 형광체와 혼합하여 백색 LED를 구현 하였다. 구현된 백색 LED는 구동 전류 350 mA, 구동 전압 3.45 V에서 색좌표 x=0.3936, y=0.3605, 색온도(CCT) 3500 K, 연색성(CRI) 87, 발광 효율 18 lm/w로 나왔다. 또한 400시간 기준 수명 시험 결과 초기광도 대비 97%의 유지율을 보였다. 따라서 본 연구를 통해 합성한 청색 형광체 $CaMgSi_2O_6:Eu^{2+}$는 UV LED기반의 백색 조명용 형광체로서의 가치가 있는 것으로 생각된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.32-35
• /
• 2006

For the white UV-LED applications, $Eu^{2+}$-activated calcium aluminium silicate phosphors were synthesized for the first time and the structures and luminescence characteristics of these phosphors were investigated. The phosphors in this study emitted blue. green or blue-green light depending on the starting materials for synthesis. In addition, the structure was also changed when the different starting materials were used. When CaO and $CaCO_3$ was used as a starting material. tetragonal $Ca_2Al_2SiO_7$ was formed and blue-green and pure green light was emitted. respectively. However. in the case of $CaSiO_3$, triclinic $CaAl_2Si2O_8$ was formed and only pure blue emission was detected. The maximum emission intensity was obtained from $CaAl_2Si_2O_8:Eu^{2+}$ phosphors, which intensity was about 1.4 times higher than that of YAG:$Ce^{3+}$ phosphor used for blue LED.

• 한국재료학회지
• /
• 제10권8호
• /
• pp.558-563
• /
• 2000

$Y_2SiO_5:Ce$ 형광체를 $In_2O_3$, $Al_2O_3$ 및 $SiO_2$로 코팅한 후 전계 방출 디스플레이에 요구되는 음극선 발광 특성을 조사하였다. $Al_2O_3$ 코팅으로 $Y_2$SiO(sub)5:Ce 형광체의 발광 효율과 에이징 특성은 감소되었다. 한편 $Al_2$$O_3$코팅으로 형광체의 발광효율은 증가하였으나 발광스펙트럼과 색좌표는 일부 변화하였다. 그러나 $Y_2SiO_5:Ce$ 청색 형과체의 발광 효율은 $SiO_2$코팅으로 크게 증가하였으며, 또한 $SiO_2$ 코팅한 $Y_2SiO_5:Ce$ 형광체의 에이징 특성은 코팅 전에 비하여 크게 향상되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.968-971
• /
• 2003

Due to a low efficiency of phosphor with large Stoke shift in Vacuum Ultra Violet (VUV) excitation environment, new PDP phosphors which can be excited in UV excitation environment need to be developed. In this study, $Zn_2SiO_4:Tb$ phosphor was synthesized by solid-state reaction method at $1300^{\circ}C$ with varying Tb concentration, and its cross relaxation effect was observed by Photoluminescence (PL) measurement. In order to decrease $^5D_3{\to}7F_j$ transition with blue emission in $Zn_2SiO_4:Tb$ phosphor, Dy, co-activator element, was added to $Zn_2SiO_4:Tb$ phosphor. In 254nm excitation environment, broad-emission peak was observed around 524nm, green emission.