• 대한토목학회논문집
• /
• 제34권1호
• /
• pp.175-183
• /
• 2014

본 연구는 점토지반에서 터널의 굴착조건(터널깊이 및 터널직경)과 시공조건(지반손실량), 지반조건(연약점토, 단단한 점토)을 변화시키면서 터널상부에 위치한 구조물의 거동변화를 조사 및 분석한 것이다. 분석에 사용된 구조물은 4층 블록식구조물로서 변형 등에 의한 균열발생과 균열폭의 차이로 인해 구조물의 손상정도를 쉽게 파악할 수 있는 특징이 있다. 다양한 터널 굴착조건 및 시공조건, 지반조건에 대해서 발생할 수 있는 터널상부 블록구조물의 거동상태를 파악하기 위해 수치해석적 매개변수 해석을 수행하였으며, 수치해석은 구조물의 실제크랙 발생을 묘사할 수 있도록 개별요소법(DEM)에 근거하여 수행하였다. 다양한 매개변수 해석으로부터 얻어진 구조물의 거동상태에 대한 결과는 터널 굴착조건 및 시공조건, 점토 지반조건과 상호 연관하여 함께 반영될 수 있도록 도표화 하였으며, 이를 이용하여 향후 점토지반에서 다양한 터널굴착 및 시공조건, 지반조건으로 인해 유발되는 터널 상부구조물의 손상정도를 보다 용이하게 파악할 수 있을 것으로 기대된다.

• 터널과지하공간
• /
• 제7권1호
• /
• pp.58-64
• /
• 1997

A pilot plant of underground cold storage for food has been excavated as a R&D program. For the stability assessment of underground cold storage opeinengs in shallow jointed rocks, three kinds of stability problems were analyzed by numerical methods. For the analysis of unstability by rock block movements, DEM was used considering the statistical distribution of rock joints. Concerning thermally induced cracking, FDM was used with thermomechanical stress analysis. Finally, in order to evaluate the joint failure during the thawing process, BE algorithm was applied. Numerical examples applied for the pilot plant show that the possibility of unstable failure of opeings exists but can be avoided with proper rock reinforcements provided.

• 전기의세계
• /
• 제26권1호
• /
• pp.87-90
• /
• 1977

Various simulation techniques were developed in the modeling of biological system during the last decades. Mostly analog and hybrid simulation techniques have been used. The authors chose the Digital Analog Simulation (DAS) technique by using the MIMIC language to simulate the saccadic eye movement system performances on the digital computer. There have been various models presented by many investigators after Young & Stark's sampled-data model. The eye movement model chosen by the authors is Robinson's model III which shows the parallel information processing characteristics clearly to the double-step input stimuli. In the process of simulation, the parameter and constants used were based on the neurophysiological data of the human and animals. The analog model blocks were converted to the corresponding MIMIC block diagrams and programmed into the MIMIC statements. The program was run on the CDC Cyber 72-14 computer. The essential input stimulus was double-step of 5 and 10 degrees, and target durations chosen were 50,100 and 150 msec. The results obtained by the DAS technqiue were in good agreement with analog simulation carried out by other investigators as well as with the experimental human saccadic eye movement responses to double-step target movements.

• 대한가정학회지
• /
• 제23권3호
• /
• pp.1-8
• /
• 1985

This study is an ergonomic study on the function of sleeves related with the expansion and contraction of the upper Extremity skin surface by various movememts. RESULTS : 1. According to the plane figure, a. The change of form is like fig. 3. b. In the changing rates of the expansion and contraction of skin surface by various movements, that of arm hole girth shows an extremely big discrepancy and that of Elbow Girth shows a relative low one. c. According to the rate of the expansion and contraction of each block, the inside of the upper arm area expands most in all the blocks measured. 2. According to the rate of expansion and contraction of skin surface by somatometry, inside lehgth of arm in M\sub 2\ and outside length of the upper arm in M\sub 4\ expand significantly8and also elbow girth in M\sub 6\, M\sub 7\, M\sub 8\ expands significantly.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.213-214
• /
• 2007

In this paper, we implement one tracking scheme based on the block matching using PowerPC system. We implement tracking algorithm uses the information from Infrared (IR) sensor for tracking object. When a occlusion occurs, the proposed algorithm predicts movements of an object using the historical tracking information and it can keep the object tracking.

• 대한가정학회지
• /
• 제19권3호
• /
• pp.21-32
• /
• 1981

Clothing must have the individual beauty and the function that one can do one's body movement freely. therefore, from the human engineering view point, the exact measurement of the human body and the analysis of it's results must be applied to clothing because the arm works most. In this study, the skin surface of arm was investigated by shell made of Alginate of each movement. And by sometic method the rate of expansion and contraction of each section, inter-relation among the bust girth, axillary arm girth and scye girth and between the shoulder length right and the under axilla waist length were calculate4d. With these results, cap height, breadth of a sleeve and arm hole girth of existing sleeve pattern have been compared and analysed. The results are as follows; 1) According to the developmental figures of shell, the whole area change was small but that of shape was remarkable in M 4, 9, 13. The change of the Block 1 was particular. 2) Over arm length was contracted in all movements except M6 and under arm length expanded. The changes of sections a, b, c are large, while those of sections d, e are small. 3) In terms of latitudes, change of fore-arm region was small. The rate of scye girth varied from 14.3% of M13 to-5.6% of M2. The breadth of a sleeve expanded in all movements, and especially the front region expanded more than the back. 4) The relation between the shoulder length right and under axilla waist length, in all occasions, was contracted mutually, and one contracted, the other expanded. Therefore, in clothing construction when we consider the function of the arm it is better to widen the arm hole and the breadth of a sleeve at the same time than no widen the shoulder length by lowering the upper part of the upper side seam line.

• 한국실내디자인학회논문집
• /
• 제20권5호
• /
• pp.125-134
• /
• 2011

Art Deco is a decorative and eclectic design style, popularized at the interwar period. The term Art Deco derives from the Exposition Internationale des Arts D$\acute{e}$coratils et Industriels Modernes held in Paris in 1925. The aim of the exposition was to create new modern aesthetics. This exposition introduced the modern decorative and industrial art to the world and influenced all designers of area, including architects, interior designers, industrial designers, craftsmen, fashion designers, etc. Art Deco designers applied inspirations from a variety of sources and movements such as the Cubist abstract, the Neoclassical refinement, Egyptian exotic elements, Babylonian and Aztec temples, the machine aesthetic, avant-garde movements, etc to their modern works. Art Deco style rapidly spread all over the design areas nationwide in America. In Art Deco architecture, in particular, its inception was French but its domination was American. Skyscrapers, airplanes, automobiles, ocean liners, jazz, Hollywood film, streamline, and native Indian symbols are the defining features of American Art Deco. This study began from questions on how these features are expressed and stylized to decoration elements as the modern aesthetics in American Art Deco architecture. Thus, the purpose of the study is to find out the ornamental and eclectic factors of Art Deco style and to define a concept of the modernity and the regionalism of Art Deco architecture in America. This article provides an overview of the decoration style of Art Deco architecture in America through the analysis of ornamental and eclectic factors reflecting diverse roots. It also analyzes the wide variety of building examples of American Art Deco which represent regionalism. In addition, this study focuses on Art Deco architecture in Miami, Florida. Miami is one of typical cities that has the most unique regional aspects of 1920's to 1940's in Art Deco architecture. Miami Art Deco architecture reveals the tropical and nautical references such as streamlined and curved walls, exotic animal motifs, flora and fauna motifs, and marine motifs: use of glass block, porthole window, terra-cotta, and pastel color stucco.

• Restorative Dentistry and Endodontics
• /
• 제28권1호
• /
• pp.41-49
• /
• 2003

There are increasing usage of Nickel-Titanium rotary files in modern clinical endodontic treatment because it is effective and faster than hand filing due to reduced step. This study was conducted to evaluate the effect of canal preparations using 3 different rotary Nickel-Titanium files that has different cross sectional shape and taper on the maintenance of canal curvature. Simulated resin block were instrumented with Profile(Dentsply, USA), GT rotary files(Dentsply, USA), Hero 642(Micro-Mega France), and Pro-Taper(Dentsply, USA). The image of Pre-instrumentation and Post-instrumentation were acquired using digital camera and overspreaded in the computer. Then the total differences of canal diameter, deviation at the outer portion of curvature, deviation at the inner portion of curvature, movement of center of the canal and the centering ratio at the pre-determined level from the apex were measured. Results were statistically analyzed by means of ANOVA, followed by Scheffe test at a significance level of 0.05. The results were as follows； 1. Deviation at the outer portion of curvature, deviation at the inner portion of curvature were showed largest in Pro-Taper so also did in the total differences of canal diameter(p＜0.05). 2. All the groups showed movements of center Profile combined with GT rotary files and Hero 642 has no difference but Pro-Taper showed the most deviation(p＜0.05). 3. At the 1, 2, 3mm level from the apex movements of center directed toward the outer portion of curvature, but in 4, 5 mm level directed toward the inner portion of curvature(p＜0.05). As a results of this study, it could be concluded that combined use of other Nickel-Titanium rotary files is strongly recommended when use Pro-Taper file because it could be remove too much canal structure and also made more deviation of canal curvature than others.

• 융합정보논문지
• /
• 제7권5호
• /
• pp.95-102
• /
• 2017

창의적 교육을 위한 모듈형 완구는 다양한 형태의 움직임을 만들어 주는 기능 블럭이 요구된다. 우선 동작을 만들 수 있는 능동 구동 모듈이 필요하고 이와 결합하여 동작을 표현해 낼 수 있기 위한 수동 연결 블록이 다수 필요하다. 본 논문에서는 다양한 창의적 동작을 만들어 낼 수 있는 모듈형 완구에 대한 구성 요소의 설계와 이를 연결하여 동작 시킬 수 있는 제어기 구조를 제안 하였다. 설계된 모듈간의 연결을 원활하게 하기 위한 기구적인 연결 방법을 제시 하였고 이에 적합한 기구구조를 제안하였다. 아울러 모듈형 동작 완구와 연계 되어 동작할 수 있는 다양한 형태의 센서 모듈에 대한 설계를 다루었다. 이런 완구를 이용하여 교육적으로 모방할 수 있는 전형적인 표준 응용 형태를 제안하고 설계된 모듈과 구성 요소를 이용하여 실제로 적용하여 모듈형 완구의 유용성을 보였다. 제안된 방식은 실제 교육용 완구에 적용하여 동작을 기록하고 반복 동작을 수행하여 효과적으로 동작됨을 보였다.

• 한국석유지질학회지
• /
• 제5권1_2호
• /
• pp.27-35
• /
• 1997

연구지역인 고래 II지역은 한반도 동남쪽 육지에 근접해 있으며 울릉분지(쓰시마분지)의 서남부에 위치한다. 동지역에 대한 3D탐사는 2D탐사에 의해 기확인된 구조들의 정밀평가를 목적으로 시행되었으며, 동작업의 일환으로 울릉분지의 층서 및 구조의 정밀분석이 시행되었다. 동지역은 기반암이 얕고 울릉분지의 구조운동이 모두 영향을 미친 지역으로 고해상도의 기반암지역 자료를 토대로 기반암을 포함하는 구조운동 및 층서와의 상관관계가 분석되었다. 3D 탄성파 자료 해석결과, 본 지역에는 조구조운동과 성인적 연관을 가진 8개의 건층면이 관찰되고 있다. 연구지역에서 관찰되는 지질구조는 분지형성초기에 형성된 블록단층과 후기 마이오세 스러스트 및 플라이오세 렌치단층 등 세 종류의 단층이 관찰되며, 울룽곡분으로 불리는 완만한 향사가 발달되어 있다. 본 지역에서 상기 지질 구조와 관련된 퇴적 시퀀스로는 음향 기반암, 열개동시성 시퀀스(시퀀스 $A_1, A_2$), 후열개 시퀀스 (시퀀스 $B_1{\~}B_3$),횡압력 동시성 시퀀스 (시퀀스 C) ,후횡압력 시퀀스 (시퀀스 D)등이 인지되었다. 각 시퀀스에 대해 구조도, 등시선도 등이 작성되어 상분석, 퇴적환경 해석작업이 이루어 졌다. 조구조운동 및 퇴적물 공급량에 따른 상대 해수면 변화와 관련하여 발달한 본 지역 시퀀스의 해석 결과, 울릉분지는 여러 형태의 조구조운동 및 퇴적물공급에의해 형성된 복합적인 분지의 층서 및 구조 양상을 나타낸다.