• 제목/요약/키워드: blender

검색결과 70건 처리시간 0.025초

한국산 잎담배의 부스러짐 특성 측정방법에 관하여 (STUDIES ON THE METHOD OF MEASUREMENT OF FRAGILITY OF KOREA TOBACCO)

  • 김기환;주영석;최영현;유광근
    • 한국연초학회지
    • /
    • 제10권1호
    • /
    • pp.65-73
    • /
    • 1988
  • The fragilities of the tobacco has been considered to be one of the most Important factor in determing not only the quality of the tobacco but also the economic effect to cigarettes manufacturing. The three blender methods to determine relative fragilities were compared with the Korea Tabacco & Ginseng Research Institute Standared Fragilities Test in order to established a suitable method for measuring the fragilities of Korea tobacco leaves. Fragilities measurement by the blender methods expressed either sieve aperture or fineness index and a statistical comparison of the three blender methods was made to short the mirror variance, standard deviation, coefficient of variation, slope, correlation, sensitivity index, etc.

  • PDF

스마트팜 열부하 분석을 위한 CFD 해석 도구 비교 (A Comparison between Various CFD Solvers for Analysis on Thermal Load in Smart Farm(Fluent, Open-FOAM, Blender))

  • 이준엽;오종우;이동훈
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 2017년도 춘계공동학술대회
    • /
    • pp.170-170
    • /
    • 2017
  • 기후변화 따른 스마트팜 돈사 외부 환경의 변화에 대응하고, 사육 환경을 능동적으로 개선하기 위한 연구가 수행 중이다. 돈사 내 열전달 요소 간 상호 역학성 분석을 위해서 고려해야할 사항은 입기구, 보온 등, 열풍기, 단열제, 위치, 방향, 돈사의 연평균 온도, 습도, 연중 일사량, 가축의 열복사 등 상호 복잡하게 연관되어 있는 물리량이다. 돈사 전체 열손실, 자연발생 에너지량, 강제발생 에너지량, 난방용량 등을 고려한 순간 열부하 산정을 위한 여러 방법 중 우선적으로 CFD(Computational Fluid Dynamics)를 이용하였다. 순간 열부하 산정을 위한 해석 도구 선정에 있어서 다양한 유체 및 기체 전산 유체역학 Solver(Fluent, Open-FOAM, Blender)를 고려하였다. 공간 Mech를 수행하기 위한 도구로는 공개 소프트웨어 인 FreeFem++ 3.51-4 (http://www.freefem.org)를 이용하였다. 이 과정에서 일부 기체 (암모니아)의 농도를 난수로 변화시키는 기법을 적용하여 가상적으로 돈사의 환경을 Pseudo 시뮬레이션 하였다. 결과적으로 Fluent에 비하여 OpenFOAM을 이용하여 얻은 열유동의 방향(속도)과 크기 백터가 상대적으로 크게 나타났다. Fluent가 시계열 상에서 혼합 기체 물리량 변화를 무시할 수 있는 안정되고 균일한 환경에 적합하기 때문인 것으로 판단되었다. Blender의 경우 Lattice Boltzmann methods 과 Smoothed-particle hydrodynamics 방법을 이용한 유체/입자 동력학 모델링을 제공함에 있어 시각적 효과를 강조하는 기능에 중점을 두었다. Fluent와 Blender에서 제공하는 해석 연산 모듈의 정확성 검증을 위해선 공간 분해능을 높인 정밀 계측 시스템을 이용하여 검증할 필요가 있다. Open-FOAM를 이용한 열부하 분석 수행이 상대적으로 높은 절대값을 보이는 특성은 열부하 제어 시스템의 Overshoot를 유발할 가능성이 있으므로 이에 대한 해석 모델의 보정이 추가적으로 필요할 것이다. CFD의 한계인 시간 복잡도를 낮추고 상대적으로 높은 시계열 분해능을 확보할 경우 돈사 내 환기시스템에 맞는 소요 환기량 실시간 산정이 가능해지고 외부기상 및 돈사내부 복사열을 활용함과 동시에 돈군 순환에 상응하는 실시간 열부하 관리 시스템 도출이 가능할 것이다.

  • PDF

블렌더와 유니티 엔진을 이용한 아두이노 학습 콘텐츠 설계 (Arduino Learning Content using Blender and Unity Engine)

  • 이민혜;박혁규;원동현;강선경;신성윤;강윤정
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2022년도 추계학술대회
    • /
    • pp.386-388
    • /
    • 2022
  • 최근 VR(virtual reality)과 AR(augmented reality)을 이용한 실감형 콘텐츠가 학습 보조 교구로써 주목을 받고 있다. 3D 기반의 콘텐츠는 평면에서 보여지는 2D 기반 콘텐츠보다 다양한 각도에서 대상을 관찰하고 체험이 가능하다는 장점이 있다. 본 논문에서는 가상환경에서의 아두이노 학습을 위한 3D 모델 기반의 콘텐츠 설계를 제안한다. 블렌더를 이용하여 아두이노 보드와 센서를 구현하고 유니티 엔진을 이용하여 3D 기반의 시뮬레이터 환경을 구성하였다. 제안하는 콘텐츠는 3D로 구현된 아두이노 보드와 센서를 이용하여 학습자들이 쉽게 아두이노의 동작원리와 코딩 과정을 체험해 볼 수 있다.

  • PDF

Design and Characteristics Analysis of a Novel Single-phase Hybrid SRM for Blender Application

  • Jeong, Kwang-Il;Ahn, Jin-Woo
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권5호
    • /
    • pp.1996-2003
    • /
    • 2018
  • In this paper, the design and characteristic analysis of a novel single-phase hybrid switched reluctance motor (HSRM) for the purpose of replacing the universal motor in commercial blenders are presented. The proposed motor is easy to manufacture due to its simple yet robust structure with minimized power switches and no torque dead-zone. Moreover, the proposed HSRM is able to deliver a high starting torque as a requirement for blending hard food or even ice. The stator has permanent magnets (PMs) mounted on its inner surface and the rotor has a wide pole arc and salient poles that contribute to its high starting torque profile and the elimination of the torque dead-zone. Finite element method (FEM) is used to analyze the characteristic of the proposed motor. Finally, the prototype is manufactured and its performance is verified through experiments.

산업용지의 벌크 향상 및 건조에너지 절감을 위한 분말상 첨가제 제조기술 개발 (I) - 신규 유기물질 맥주박의 화학적.물리적 특성 평가 - (Development of New Powdered Additive and Its Application for Improving the Paperboard Bulk and Reducing Drying Energy (I) -Analysis of Chemical and Physical Properties of Brewers Grain -)

  • 이지영;김철환;최재성;김병호;임기백;김다미
    • 펄프종이기술
    • /
    • 제44권2호
    • /
    • pp.58-66
    • /
    • 2012
  • Brewers grain is a byproduct of beer brewing and consists primarily of grain husks, pericarp, and fragments of endosperm. Although this material is consumed by animals and used as fertilizer, a large amount of brewers grain is simply discarded. Therefore, new methods for utilizing this fibrous resource should be pursued. In this study, we examined the potential utilization of brewers grain as an additive in the paperboard industry by determining the chemical composition of brewers grain and the physical properties of brewers grain powders after grinding with two types of grinders. We found that brewers grain had a lower holocellulose content and higher lignin content and intermediate ash content when compared to other biomass materials, and did not contain any contaminants that would interfere with the papermaking process. Particles had a higher fiber length, less fiber width, and narrower shape factor distribution when ground by a blender type grinder than by a pin crusher type grinder. The blender type grinder was concluded to make regular brewers grain particles appropriate for papermaking.

메탄생성 효율증진을 위한 소화원료 전처리 연구 (A Study on Substrate Pre-treatment for Mathane Production Performance)

  • 정광화;류승현;남궁규철;김재환;곽정훈;안희권;유용희
    • 한국축산시설환경학회지
    • /
    • 제17권3호
    • /
    • pp.197-204
    • /
    • 2011
  • 돈 분뇨 슬러리를 대상으로 하여 기계적 분쇄와 캐비테이션 그리고 오존을 적용하여 원료의 특성 변화와 생분해도 그리고 메탄 생성잠재성 변화를 측정한 시험결과를 요약한 주요 내용은 다음과 같다. 1. 분쇄방법과 캐비테이션의 방법의 경우 큰 입자 및 미세입자를 줄일 수 있는 효과가 있었다. 2. 오존처리의 방법의 경우 용존물질의 부분산화, 미세입자의 부분산화 및 가용화 촉진을 통해 혐기성 소화의 첫 단계인 가수분해를 더욱 촉진할 것으로 사료된다. 3. 입도분포 변화에 따른 메탄생성량의 변화는 분쇄처리할 경우가 캐비테이션과 오존 처리방법에 비해 더 양호한 메탄생성효율을 보였다.

다중 프레임에서의 보행자 검출 및 삭제 알고리즘 (Automatic Pedestrian Removal Algorithm Using Multiple Frames)

  • 김창성;이동석;박동선
    • 스마트미디어저널
    • /
    • 제4권2호
    • /
    • pp.26-33
    • /
    • 2015
  • 본 논문은 영상에서 효과적으로 보행자를 삭제하는 자동 삭제 시스템을 제안한다. 첫 번째로 Histogram of Oriented Gradient(HOG) / Linear-Support Vector Machine(L-SVM)분류기를 이용하여 보행자를 찾고, 참조영상으로부터 적절한 배경을 습득하여 삭제될 보행자를 대체한다. 배경은 참조영상 내에서 검색하며 변경된 feather blender 연산은 대체 영역의 경계를 자연스럽게 만든다. 기존에 존재하던 대부분의 시스템이 수동인 것에 반해 제안된 시스템은 자동으로 객체를 검출하고 자연스러운 배경을 생성한다. 실험결과 대체된 영역의 PSNR 평균은 19.246으로 측정되었다.

모델, 데이터, 대화 관점에서의 BlendorBot 2.0 오류 분석 연구 (Empirical study on BlenderBot 2.0's errors analysis in terms of model, data and dialogue)

  • 이정섭;손수현;심미단;김유진;박찬준;소아람;박정배;임희석
    • 한국융합학회논문지
    • /
    • 제12권12호
    • /
    • pp.93-106
    • /
    • 2021
  • 블렌더봇 2.0 대화모델은 인터넷 검색 모듈과 멀티 세션의 도입을 통해 실시간 정보를 반영하고, 사용자에 대한 정보를 장기적으로 기억할 수 있도록 함으로써 오픈 도메인 챗봇을 대표하는 대화모델로 평가받고 있다. 그럼에도 불구하고 해당 모델은 아직 개선점이 많이 존재한다. 이에 본 논문은 블렌더봇 2.0의 여러 가지 한계점 및 오류들을 모델, 데이터, 대화의 세 가지 관점으로 분석하였다. 모델 관점에서 검색엔진의 구조적 문제점, 서비스 시 모델 응답 지연시간에 대한 오류를 주로 분석하였다. 데이터 관점에서 크라우드 소싱 과정에서 워커에게 제공된 가이드라인이 명확하지 않았으며, 수집된 데이터의 증오 언설을 정제하고 인터넷 기반의 정보가 정확한지 검증하는 과정이 부족한 오류를 지적하였다. 마지막으로, 대화 관점에서 모델과 대화하는 과정에서 발견한 아홉 가지 유형의 문제점을 면밀히 분석하였고 이에 대한 원인을 분석하였다. 더 나아가 각 관점에 대하여 실질적인 개선방안을 제안하였으며 오픈 도메인 챗봇이 나아가야 할 방향성에 대한 분석을 진행하였다.