• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.83-90
• /
• 2016

Increasing the amount of filler in paper is of high interest for paper industry while maintaining its key sheet quality properties. In this study, a MFC-GCC composite, made through a co-grinding NBSK (Northern bleached softwood kraft) pulp with a ground calcium carbonate (Intracarb 60), was used as a strength aid in paper in order to evaluate a potential cost reduction through filler increase without sacrificing paper quality. Hand-sheets were made of NBSK and/or eucalyptus pulp by using white water recirculation in a Tappi sheet former and was compared its properties without or with MFC additions at different filler levels. It was found that the MFC-GCC composite has a large surface area compared to the fiber, allowing the formation of more hydrogen bonds in the web, thus giving natural strength to the paper. Overall results are encouraging that the MFC-GCC composite allows papermaker to reduce basis weight and maintain critical sheet properties.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.2
• /
• pp.55-61
• /
• 1998

This treatment was applied to bleached softwood kraft pulp handsheets in an effort to improve physical strength of paper. Paper strength was improved by esterification of cellulose and polycarboxylic acid. Because hydrogen bond of carboxyl group is stronger than that of hydroxyl group, polycarboxylic acid forms stronger hydrogen bond than cellulose does. 1,2,3,4,-cyclopentanetetracarboxylic acid (CPTA) and sodium dihydrogen phosphate ($NaH_2O_4$) were used as polycarboxylic acid and catalyst, respectively This reaction was confirmed by the weight gain of the handsheets, by FTIR spectrum and by changes in mechanical properties of sheets. Wet tensile strength was improved when handsheets were treated with polycarboxylic acid. However, tear strength and burst strength decreased.

• KSBB Journal
• /
• v.14 no.4
• /
• pp.470-475
• /
• 1999

Several enzyme were applied to Laubholz Bleached Kraft Pulp(LBKP) to evaluate the influence on beatability which was measured in Schopper Riegler value, and the results were compared with untreated pulp. Among the types of enzyme, cellulase was found to be the most effective. Addition of cellulase increased the beatability by 28% at optimum condition. Strength properties such as tensile strength and folding endurance also increased with enzymatic treatment by 12% and 46%, respectively. However, excessive dosage of cellulase had an adverse effect on strength properties in spite of the high beatability. Fibrillization by cellulase and destruction of fiber by excessive reaction was observed by Scanning Electron Microscopy(SEM).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.3
• /
• pp.59-68
• /
• 2001

Essential oils extracted from Chamaecyparis obtusa were applied to make antibacterial corrugating liner. The quantitative analysis of the essential oils was carried out by GC-MS, which showed that the monoterpenes as a basic component of the essential oils extracted from Chamaecyparis obtusa in the domestic mountain were greater in amount than those in China. The antibacterial activity was then examined with Tyromyces palustris and gram-negative/positive bacteria. The papers treated with the essential oils desplayed great resistance against T. Palustris and gram bacteria but the best results were obtained with the handsheet formed by softwood bleached kraft pulp rather than the liner by OCC. The low antibacterial activity of the liner was considered to be due to starch components which could be readily attacked by the fungi.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.1 s.119
• /
• pp.1-7
• /
• 2007

Internal fibrillation of pulp fiber is an important factor affecting paper properties. Internal fibrillation of pulp fiber is usually introduced with several kinds of modifications of fiber by the mechanical treatment such as refining, high shear and/or high consistency mixing, etc. Unfortunately there are no standardized methods that can characterize the extent of internal fibrillation and its contribution on the paper properties. The purpose of this study is to try and find the potential methods that can characterize the internal fibrillation of pulp fiber quantitatively. Softwood bleached kraft pulp was treated with Hobart mixer to introduce the internal fibrillation without the significant fiber damage and external fibrillation. The extent of internal fibrillation was increased with the increase of mechanical treatment consistency. Several fiber properties were measured to find the potential means that could characterize and quantity the internal fibrillation. Laminated area could not be used as a means for quantifying the internal fibrillation because of the effect of swelling and the different internal fibrillation behavior at different mechanical treatment consistency. Micro and macro internal fibrillation models were proposed for describing the different behavior for the mechanical treatment at low and high consistencies of pulp. The Internal fibrillation showed good correlation with swelling of fiber wall. This trend was confirmed through the measurement of wall thickness and/or cross section area of fiber. Therefore the internal fibrillation possibly can be described as the indices indicating the change of wall thickness and/or cross section area.

• Journal of Korean Society of Water and Wastewater
• /
• v.8 no.3
• /
• pp.9-18
• /
• 1994

Activated sludge pilot plant testing was conducted to determine the ability of a well-designed activated sludge treatment system to remove chromic toxicity from the bleached kraft pulp mill effluent. Removals of conventional(BOD and SS) and nonconventional(resin and fatty acids, color, AOX) pollutants were estimated. The pilot plant was operated at steady state for about 10 weeks at an F/M of 0.28 and a sludge age of 8.4 days. The average MLSS concentration was 4,309mg/l, of which volatile fraction was 57%. During the operation period, the BOD removal reaction rate(k) was determined to be 8.2/day at $30^{\circ}C$. The BOD removal was 84 percent, which was 3 to 6 percent lower than expected for full-scale treatment. The chronic toxicity of the activated sludge effluent was tested by employing both Dinnel and the BML protocols. It was found that the pilot plant could achieve in excess of 90 percent reduction in chronic echinoderm toxicity. The data show slight reduction of color and AOX across the activated sludge system. The pilot system, however, demonstrated on excellent removal of resin and fatty acids.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.4
• /
• pp.69-75
• /
• 2014

Effects of alkali swelling of HwBKP (hardwood bleached kraft pulp) at a low concentration below 2 percent (based on the oven-dried weight of pulp) on handsheet properties were investigated. Swelling treatment of HwBKP was performed at various low NaOH concentrations with/without beating. Then, the changes in handsheet properties were evaluated in terms of bulk, optical and strength properties. It was found that bulk was slightly increased when the alkali concentration was increased. When the pulp was only swollen without beating, paper optical and strength properties was slightly decreased or not changed with alkali concentration. When the pulp was alkali-swollen after beating, paper strength and opacity showed almost no changes while brightness was increased. When the pulp was beaten after NaOH swelling, alkali concentration showed almost no effect on brightness and opacity of paper. Paper strength was slightly decreased with alkali concentration, suggesting that alkali pretreatment before refining could adversely affect refining efficiency.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.3
• /
• pp.65-72
• /
• 2014

In this study, effects of alkali swelling at low concentration below 2 percent on properties of hardwood bleached kraft pulp (HwBKP) were elucidated. Swelling treatment of HwBKP was performed at various NaOH concentrations with/without beating. Then, the swelling characteristics of pulp fiber was evaluated by measuring the solvent retention values such as water retention value (WRV) and isopropyl alcohol retention value (LRV). It was found that fiber characteristics were influenced by NaOH swelling even at low alkali concentration and beating treatment as well. The values of WRV and LRV were decreased when the alkali concentration was increased. It is the result from the decreased acidic groups of pulp which were formed during beating. The acidic groups could be neutralized and then removed by alkali. The difference between WRV and LRV was decreased with increasing alkali concentration while the difference was increased when the alkali swollen pulp was beaten. In addition, the crystalline structure of HwBKP was almost not changed while the crystallinity was influenced by swelling treatment at a low alkali concentration.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.367-373
• /
• 1999

Increasing consumer demand for recycle of most paper products is challenging manufacturers to use lower value raw materials while maintaining high quality. This study was carried out to investigate the composition of old corrugated containers (OCC) and to manufacture printing and writing papers of over 85% (ISO) brightness by ECF and TCF bleaching from OCC. Fiber length of American old corrugated container (AOCC) was longer than that of Korean old corrugated container (KOCC) in fiber length. The former was composed of unbleached kraft pulp (UKP) of about 80 percentage, the latter about 20 percentage. OCC is feasible for manufacturing of pulps i.e., AOCC is for printing and writing papers and KOCC is for whiteboards, in the aspects of brightness and mechanical properties on the other hand, the cost of manufacturing upgraded papers by OCC is high because of bleaching chemicals. Neverthless, considering various aspects, especially environment, there are many advantages in recycling. In case of the treated AOCC pulp, over 85% (ISO) brightness can be achieved through TCF or ECF bleaching step, while the treated KOCC pulp did not allow high brightness through TCF bleaching. The tensile index of the bleached KOCC pulp was lower than that of the bleached AOCC pulp, but the burst and tear index of KOCC was higher than that of AOCC.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.04a
• /
• pp.191-197
• /
• 2008

In this study, as a fuel filter for automobiles, base paper which can filtrate the polluted particles must satisfy with the standards of each vehicle. and a filter of impregnation paper made that combining the base paper with the resin. Therefore, They were wanted to found out the factors that affect base paper and impregnation paper according to content of HPZ, Mulberry pulp(MP), Laub holze bleached kraft pulp(LBKP). The most important things we wanted to find out in base paper and impregnation paper test were weight, thickness, air permeability, burst and tensile strength, maximum pore size and mean pore size, stiffness. we wanted to measure a rate of change of these condition by adjusting a rate of mixing for HPZ, MP and LBKP. Moreover, It suited for an impregnation paper mixed with a rate of mulberry pulp 20%, HPZ 40% and LBKP 40%. Used resins in this study was Phenol, Acryl, PVAc. And as every resins, sample was divided into existence and nothing of embossing. as a fuel filter for automobiles, It was appeared that the suitable condition of base paper was a rate of mixing for HPZ(40%), MP(20%) and LBKP(40%).