• 한국해양공학회지
• /
• 제33권4호
• /
• pp.364-376
• /
• 2019

When underwater blasting is conducted, both shock waves and water waves have an effect on adjacent coastal areas. In this study, an empirical formula for estimating the details of water waves caused by underwater blasting was applied to a non-reflected wave generation system, and a 3D numerical wave tank (NWT) was improved to reproduce the generation and propagation of such water waves. The maximum elevations of the propagated water waves were comparatively analyzed to determine the validity and effectiveness of the NWT. Good agreement was demonstrated between the empirical and simulation results. The generation and propagation of water waves were also simulated under each underwater blasting scenario for the removal of the Todo islet at the Busan Newport International Terminal (PNIT). It was determined that the water waves generated by the underwater blasting scenario examined in this study did not have a significant impact on the PNIT. In addition, multiple-charge blasting caused higher wave heights than single-charge blasting. As the amount of firing charge increased, the wave height also increased. Finally, larger water waves were generated during the later blasting conducted at a deeper depth as compared with an earlier blasting conducted at a relatively shallow depth.

• 화약ㆍ발파
• /
• 제26권1호
• /
• pp.39-48
• /
• 2008

그 동안 우리나라와 같이 터널 및 노천 발파 현장 근거리에 보안물건이 위치해 있어 진동제어가 절실히 필요한 상황에서 진동제어에 효과가 있는 것으로 알려진 전자뇌관을 이용하여 불쾌감을 주던 발파음을 쾌적한 발파음으로 전환하고자 연주식발파공법(Orchestra blasting method, OBM)개발에 대한 연구가 진행되어왔으며, 본 연구에서는 리듬감구현에 중점을 두고 실험을 실시하였다. 우선 단발발파를 실시하여 독립파형을 획득, 누적 파형합성프로그램(Program blasting wave, PBW)을 이용하여 분석한 결과 실험 현장의 최적지연초시는 34ms를 나타내었고, 50ms이상에서는 수렴하는 경향을 보였다. 또 리듬감 구현에 필요한 지연시차를 선택한 음악의 실제 연주 시간을 분석하여 결정하였고, 그 결과 실제 연주 시간에 맞춰 기폭된 발파음은 큰 북으로 연주하는 듯한 느낌을 주는 쾌적한 발파음으로 전환시킬 수 있었다.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.619-629
• /
• 2013

본 연구의 목적은 인공 발파진동실험을 이용하여 흙댐 축조재료의 전단파속도를 추정하고 산정 방법의 실효성을 확인하는 것이다. 이를 위하여 운영 중인 성덕댐에 대하여 국내 최초로 실대규모 근접 발파진동 실험을 수행하였다. 장약량과 발파 시추공심도를 4가지 유형으로 달리한 발파진동을 유발시키고, 각 유형별 발파 시에 폭원에 인접한 기반암노두와 댐 정상부에서 가속도를 각각 계측하였다. 발파진동실험으로부터 댐 정상부에서 얻어진 계측기록을 주파수 분석하여 대상댐의 고유진동수를 산정하고, 계측된 가속도기록으로 산정한 고유진동수와 기반암에서 계측한 발파파 가속도를 입력하중으로 한 반복적인 동적수치해석을 수행하여 계산한 고유진동수를 일치시키는 방법으로, 흙댐 성토재료의 심도별 전단파속도를 추정하였다. 산정된 대상댐 성토재료의 전단파속도는 발파유형에 영향을 받지 않고 일관성 있는 결과를 산정함을 확인하였고, 기존의 경험적 연구결과와 비교하여 그 실효성도 확인하였다. 이로부터 지진계가 설치되지 않아 실지진 계측기록을 이용할 수 없는 중소규모 댐의 경우, 인접발파에 따른 발파진동계측기록에 대한 분석으로도 댐 축조재료의 전단파속도를 실효성 있게 추정할 수 있음을 확인하였다.

• 대한화약발파공학회:학술대회논문집
• /
• 대한화약발파공학회 2006년도 추계학술발표회 논문집
• /
• pp.119-140
• /
• 2006

발파를 통한 암반 굴착작업은 폭약의 폭발 시 발생하는 충격압과 가스압을 이용하여 암석을 파괴하며, 폭원으로 부터 3차원적으로 전파되어온 충격압에 의한 충격파는 발파에 의한 에너지의 $0.5{\sim}20%$가 탄성파의 형태로 균열대 외부의 지반속으로 전파되면서 공기매체를 타고 전달되는 것이 발파소음이다. 발파소음은 공기의 진동에 의한 음파 가운데 가청범위 ($20{\sim}20000Hz$)의 주파수를 갖는 충격성 소음으로 인체 감응에 의해 영향이 제기되는 것으로, 정신적 고통에 의한 민원발생으로 공사정지, 발파규모 축소 등으로 발파작업에 지장을 주고 있다. 본 연구는 터널발파작업에 따른 발파소음 저감을 위해 현장마다 설치하고 있는 방음시설의 설치시기와 설치방법 그리고 재질에 대하여 현장시공 사례를 통하여 고찰하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.391-398
• /
• 2004

The propagation mechanism of a detonation pressure with fully coupled charge is clarified and the blasting pressure propagated in rock mass is derived from the application of shock wave theory. Probabilistic distribution is obtained by using explosion tests on emulsion and rock property tests on granite in Seoul and then the probabilistic distribution of the blasting pressure is derived from their properties. The probabilistic distributions of explosive properties and rock properties show a normal distribution so that the blasting pressure propagated in rock can be also regarded as a normal distribution. Parametric analysis was performed to pinpoint the most influential parameter that affects the blasting pressure and it was found that the detonation velocity is the most sensitive parameter. Moreover, uncertainty analysis was performed to figure out the effect of each parameter uncertainty on the uncertainty of blasting pressure. Its result showed that uncertainty of natural rock properties constitutes the main portion of blasting pressure uncertainty rather than that of explosive properties.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.85-92
• /
• 1999

Blasting induced damage boundary was determined by measuring vibrations adjacent to charging holes. the criterion adopted to define damages is that blasting-induced strains exceeding tension-crack strain level cause damages. The blasting vibrations were measured in terms of acceleration and converted to strains. The tension-crack strain level was determined with tensile strengths and elastic moduli of rock cores. The damage zone was found to be extended radially about 1 meter from the blasthole detonated with 250 to 700 grams of explosives. The comparison of shear wave velocity profiles before and after blasting shows that the damage boundary of 1 meter seems to be reliable.

• Geomechanics and Engineering
• /
• 제11권5호
• /
• pp.607-624
• /
• 2016

Rockburst is becoming more serious in Chinese coal mine. One of the effective methods to control rockburst is blasting. In the paper, we monitored and analyzed the blasting waves at different blast center distances by the Hilbert-Huang transform (HHT) in a coal mine. Results show that with the increase of blast center distance, the main frequency and amplitude of blasting waves show the decreasing trend. The attenuation of blasting waves is slower in the near blast field (10-75 m), compared with the far blast field (75-230 m). Besides, the frequency superposition phenomenon aggravates in the far field. A majority of the blasting waves energy at different blast center distances is concentrated around the IMF components 1-3. The instantaneous energy peak shows attenuation trend with the blast center distance increase, there are two obvious energy peaks in the near blast field (10-75 m), the energy spectrum appears "fat", and the total energy is greater. By contrast, there is only an energy peak in the far blast field, the energy spectrum is "thin", and the total energy is lesser. The HHT three dimensional spectrum shows that the wave energy accumulates in the time and frequency with the increasing of blast center distance.

• Geomechanics and Engineering
• /
• 제15권2호
• /
• pp.745-754
• /
• 2018

In the analysis of the effects of rock tunnel blasting vibration on adjacent existing buildings, the model of simplified equivalent load produces higher calculation result of vibration, due to the lack of consideration of the millisecond delay effect. This paper, based on the static force equivalence principle of blasting load, proposes a new determination method of equivalent load of blasting vibration. The proposed method, based on the elastic-static force equivalence principle of stress wave, equals the blasting loads of several single blastholes in the same section of millisecond blasting to the triangle blasting load curve of the exploded equivalent elastic boundary surface. According to the attenuation law of stress wave, the attenuated equivalent triangle blasting load curve of the equivalent elastic boundary is applied on the tunnel excavation contour surface, obtaining the final applied equivalent load. Taking the millisecond delay time of different sections into account, the time-history curve of equivalent load of the whole section applied on the tunnel excavation contour surface can be obtained. Based on Sailing Tunnel with small spacing on Sanmenxia-Xichuan Expressway, an analysis on the blasting vibration response of the later and early stages of the tunnel construction is carried out through numerical simulation using the proposed equivalent load model considering millisecond delay effect and the simplified equivalent triangle load curve model respectively. The analysis of the numerical results comparing with the field monitoring ones shows that the calculation results obtained from the proposed equivalent load model are closer to the measured ones and more feasible.

• 한국안전학회지
• /
• 제12권4호
• /
• pp.102-107
• /
• 1997

Ground vibrations are an integral part of the process of rock blasting. The sudden acceleration of the rock by the detonation gas pressure acting on the drillhole walls induces dynamic stresses in the surrounding rock mass. This sets up a wave motion in the ground much like the motion in a bowl of jelly when disturbed by the action of a spoon. The wave motion spreads concentrically from the blasting site, particularly along the ground surface, and is therefore attenuated, since its fixed energy is spread over a greater and greater mass of material as it moves away from its origin. Some theoretical aspects of the generation and propagation of vibrations produced in rock blasting are analyzed; although it must be indicated that this is just a mere approximation to the problem, as the actual phenomena are much more complex owing to the interaction of different types of waves and their modifying mechanics.

• 터널과지하공간
• /
• 제16권6호
• /
• pp.476-485
• /
• 2006

발파에 의한 암반의 손상이나 파쇄는 폭약의 폭굉 과정에서 발생하는 충격파와 가스팽창의 영향에 의해 야기된다. 발파에 의한 파괴 메커니즘을 완전히 이해하기 위해서는 두 메커니즘을 같이 연구해야한다. 본 연구에서는 개별 요소법에 기초한 수치해석 프로그램인 PFC2D를 이용하여 발파공 벽면에 작용하는 폭굉압과 가스압을 동시에 모델링 할 수 있고 이에 따른 암반 내 균열 발생을 확인할 수 있는 알고리즘을 개발하였다. 또한 시멘트-모르타르 블록에서의 모형 발파시험을 수치해석을 수행함으로써, 개발된 알고리즘을 검증하였다.