• 제목/요약/키워드: blasting site

검색결과 182건 처리시간 0.024초

심발공법에 따른 발파진동 저감효과에 대한 수치해석적 연구 (A Numerical Study on the Reduction Effect of Blasting Vibration with Cut Method)

  • 손지호;김병렬;이승중;김남수;이효;최성웅
    • 화약ㆍ발파
    • /
    • 제37권1호
    • /
    • pp.1-13
    • /
    • 2019
  • 발파굴착을 수행하는 터널시공 현장에서, 발파진동이 반복적으로 작용할 경우 인근 보안물건에 손상을 입힐 수 있으며, 이러한 발파진동을 저감시킬 수 있는 방법으로는 전자뇌관의 사용, 분산장약, 심발공법의 변경 등이 고려될 수 있다. 본 연구에서는 수치해석 기법을 이용하여 심발공법에 따른 발파진동 저감효과를 분석하고자, 3차원 유한차분법 프로그램인 FLAC3D를 이용하여 발파공, 지연시차, 장약량 등을 수치모델에 반영하고, 발파공별로 동하중을 적용하여 수치해석을 수행하였다. 심발공법은 터널 시공현장에서 많이 사용되고 있는 V-cut 공법 및 다단평행의 심발공법을 적용하였으며, 실제 터널 시공현장에서 시험발파를 수행하여 현장의 발파진동 계측자료와 수치해석의 진동속도를 비교하였다. 수치해석과 시험발파의 발파진동은 매우 유사한 경향을 나타낸 것으로 분석되었다.

전자뇌관을 이용한 수직구 전단면 다단시차 분할 발파에 대한 연구 (A study on full-face sequential blasting using electronic detonator)

  • 윤지선;김수현;배상훈
    • 한국터널지하공간학회 논문집
    • /
    • 제10권2호
    • /
    • pp.177-184
    • /
    • 2008
  • 본 연구에서는 발파 진동 및 소음에 관한 문제를 최소화하기 위해 발파진동 파형합성과 발파 시뮬레이션을 통해 진동을 최소화시킬 수 있는 전자뇌관의 최적초시를 찾고, 또한 전단면 분할 발파의 감쇄특성에 대한 연구를 토대로 하여 전단면 다단시차 분할 발파기법을 개발하였다. 경부고속철도 OO공구 수직구 시공현장에서 전자뇌관을 이용한 파형합성 최적초시적용과 전단면 다단시차 분할발파를 동시에 수행하는 발파기법을 현장에 적용함으로써 그 타당성을 검토하였다.

  • PDF

에어데크 적용 시 발파공 내 압력변화 특성에 대한 수치해석 (A Numerical Study on Pressure Variation Characteristics in Blasthole by Air-Deck)

  • 강대우;허원호
    • 화약ㆍ발파
    • /
    • 제29권1호
    • /
    • pp.1-9
    • /
    • 2011
  • 에어데크 공법은 노천광 및 대규모 발파현장에서 널리 쓰이는 대표적인 발파기술 중 하나이다. 에어데크 공법의 효율성 극대화를 위해 그간 많은 연구와 실험이 이루어졌으며, 공내에서 어떠한 압력 거동을 일으키는가를 규명하기 위한 노력들이 있었다. 본 연구에서는 다양한 에어데크 조건하에서 각 에어데크 구간이 어떠한 압력의 차이를 일으키는가에 대해 수치해석적으로 분석하였고, 에어데크의 위치와 에어데크 구간의 길이에 대한 압력변화를 알아보았다. 기본적으로 모든 수치해석은 JWL 상태방정식을 사용하였으며 2차원 평면상에서 진행 하였다. 순수한 압력의 변화만을 관찰하기 위해 암반의 밀도와 강도만을 달리하고 모든 암반은 균질한 상태로 가정하였다.

산악터널에 인접한 개인 박물관의 발파공해 영향평가 및 굴착 시공사례 (The Blasting Pollution Effects Estimation & The Excavation Construction Case Study Of Personal Museum On Tunnel)

  • 권순섭;이명철;박태순;정인철;이현구
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2004년도 추계학술대회 논문집
    • /
    • pp.127-132
    • /
    • 2004
  • The third double-track construction part of work, called Chung Ang Railroad line(Deok-So$\∼$Won-Ju) is in progress and the personal museum located 330m from the starting point of Pal-Dang Tunnel(length=4,470m) line in the canyon is to be effected by rock blasting during the tunnel excavation work, especially museum articles and building itself. This paper is the example of application suitable tunnel rock blasting pattern for excavation after the case study about the investigation and analysis of rock blasting noise pollution during tunnel excavation work. The museum is a three-story building, RC concrete structure and is located 17m from the top of the tunnel, in the center of the double-track line. Comparing estimate vibration frequency with site vibration one, it can be verified the reasonable rock blasting noise pollution as improving the application of tunnel excavation rock blasting pattern. The above pattern has been selected economically and effectively and applied to our construction field.

  • PDF

터널발파 현장의 안전성 확보를 위한 비전기뇌관 활용방안 (Utilization of Non-electric Detonator for the Safety of the Tunnel Blasting Site)

  • 최형빈
    • 화약ㆍ발파
    • /
    • 제32권3호
    • /
    • pp.26-36
    • /
    • 2014
  • 국내 터널공사에 사용되고 있는 뇌관의 안전성 및 경제성에 대한 의견을 알아보기 위하여 분야별 총 345명을 대상으로 설문조사를 실시하였다. 그 결과, 비전기뇌관의 안전성이 86.7%로 매우 높게 평가되었으며, 터널 굴착비 대비 뇌관이 차지하는 재료비가 8.1%임을 고려할 때 경제성보다 안전성을 우위를 둔 비전기뇌관 사용을 적극 활용한다면 터널현장의 발파사고 예방에 크게 기여할 것으로 보인다. 더불어 터널공사 국가발주처 경찰청 화약류 제조사들에게 의견수렴, 기초자료를 제공하는데 도움을 주고자 한다.

근접장 발파진동에서 진동속도와 진동레벨의 비교 (The Vibration Velocity and Vibration Level of Near-field Blasting Vibration in an Urban Blasting Site)

  • 이연수;장서일
    • 한국소음진동공학회논문집
    • /
    • 제15권8호
    • /
    • pp.918-923
    • /
    • 2005
  • The vibration level (dB(V)) and vibration velocity (cm/sec) on the ground and buildings due to the differences of the measuring sites from the blasting source was investigated. To compare with vibration level and vibration velocity theirs magnitude was not surely directly proportional and vibration velocity 0.1 cm/sec was $45\~50$ dB(V). The difference between the measured vibration level and the calculated vibration level by Ejima's equation using vibration velocity PVS(peak vector sum) showed $21.0\~30.9$ dB(V) on the ground, $15.3\~23.6$ dB(V) on the apartment, respectively. And the correlation of vibration velocity and nitration level at the measuring sites of lower altitude showed higher than that of higher altitude.

대구지역지층의 지질특성과 대표암반에 대한 발파진동계수산출 (Blasting vibration coefficients and mechanical characteristics of Taegu area)

  • 안명석;김종대;김남수
    • 터널과지하공간
    • /
    • 제10권2호
    • /
    • pp.211-217
    • /
    • 2000
  • 본 연구는 대구지역의 대표적인 암석들을 대상으로 일축압축시험 등의 실내 시험과 현장 탄성파속도 시험 등을 실시하여 역학적 특성을 규명하였고, 달서구 성서지역에서 시험발파를 실시하여 발파진동계수를 도출하였다. 그 결과 대구지역의 경상계 퇴적암류는 풍화암에서 경암까지의 다양한 강도 특성을 보였고, 화산암류인 안산암은 경암에서 극경암에 해당되는 것으로 나타났다. 또한 풍화암 내지 보통암에 해당되는 성서지역의 시험발파 결과 발파진동계수 K는 114.8, n은 1.48로 계산되었다.

  • PDF

정밀발파의 표준화(下) (Standardization of Cautious blasting)

  • 허진
    • 기술사
    • /
    • 제23권6호
    • /
    • pp.41-46
    • /
    • 1990
  • First of all, Under given condition such as bit gage of 36mm Drill bit with right class of jack-logs experimental test carried out from two face of Bench, firing of each hole brought 90 degree Angle face and them measured length of Burden and charged ammount of powder as following. (equation omitted) A=Activated Area A=ndi=m S=Peripheral length of Charged. room Ca=Rock Coeffiecency d : di=Hole diameter When constructed subway of Seoul in 1980 the blasting works increased complaint of ground vibration. in order to prevent the damage to structures. Some empirical equations were made as follows on condition with Jackleg Drill (Bit Gage ø 36mm) and within 30 meter distance between blasting site and structures. V=K(D / W)$\^$-n/ N=1.60-1.78 K=48-138 Project one of contineous works to above a determination of empirical equation on the cautious blasting vibration with Crawler Drill(ø 70-75mm) in long distance. V=41(equation omitted) V=124(equation omitted).

  • PDF

발파진동이 지반의 안정에 미치는 영향 (The Influence of Ground Stability with Blasting Vibration)

  • 신진환;오세욱
    • 한국안전학회지
    • /
    • 제12권4호
    • /
    • pp.102-107
    • /
    • 1997
  • Ground vibrations are an integral part of the process of rock blasting. The sudden acceleration of the rock by the detonation gas pressure acting on the drillhole walls induces dynamic stresses in the surrounding rock mass. This sets up a wave motion in the ground much like the motion in a bowl of jelly when disturbed by the action of a spoon. The wave motion spreads concentrically from the blasting site, particularly along the ground surface, and is therefore attenuated, since its fixed energy is spread over a greater and greater mass of material as it moves away from its origin. Some theoretical aspects of the generation and propagation of vibrations produced in rock blasting are analyzed; although it must be indicated that this is just a mere approximation to the problem, as the actual phenomena are much more complex owing to the interaction of different types of waves and their modifying mechanics.

  • PDF

인공발파진동실험을 이용한 흙댐 축조재료의 전단파속도 산정 (Estimation of Shear Wave Velocity of Earth Dam Materials Using Artificial Blasting Vibration Test)

  • 하익수;김남룡;임정열
    • 대한토목학회논문집
    • /
    • 제33권2호
    • /
    • pp.619-629
    • /
    • 2013
  • 본 연구의 목적은 인공 발파진동실험을 이용하여 흙댐 축조재료의 전단파속도를 추정하고 산정 방법의 실효성을 확인하는 것이다. 이를 위하여 운영 중인 성덕댐에 대하여 국내 최초로 실대규모 근접 발파진동 실험을 수행하였다. 장약량과 발파 시추공심도를 4가지 유형으로 달리한 발파진동을 유발시키고, 각 유형별 발파 시에 폭원에 인접한 기반암노두와 댐 정상부에서 가속도를 각각 계측하였다. 발파진동실험으로부터 댐 정상부에서 얻어진 계측기록을 주파수 분석하여 대상댐의 고유진동수를 산정하고, 계측된 가속도기록으로 산정한 고유진동수와 기반암에서 계측한 발파파 가속도를 입력하중으로 한 반복적인 동적수치해석을 수행하여 계산한 고유진동수를 일치시키는 방법으로, 흙댐 성토재료의 심도별 전단파속도를 추정하였다. 산정된 대상댐 성토재료의 전단파속도는 발파유형에 영향을 받지 않고 일관성 있는 결과를 산정함을 확인하였고, 기존의 경험적 연구결과와 비교하여 그 실효성도 확인하였다. 이로부터 지진계가 설치되지 않아 실지진 계측기록을 이용할 수 없는 중소규모 댐의 경우, 인접발파에 따른 발파진동계측기록에 대한 분석으로도 댐 축조재료의 전단파속도를 실효성 있게 추정할 수 있음을 확인하였다.