• 한국세라믹학회지
• /
• 제53권3호
• /
• pp.376-380
• /
• 2016

A composite electrode made of iron oxide nanoparticles/multi-wall carbon nanotube (iNPs/M) delivers high specific capacity and cycle durability. At a rate of $200mAg^{-1}$, the electrode shows a high discharge capacity of ${\sim}664mAhg^{-1}$ after 100 cycles, which is ~ 70% of the theoretical capacity of $Fe_3O_4$. Carbon black, carbon nanotube, and graphene as anode materials have been explored to improve the electrical conductivity and cycle stability in Li ion batteries. Herein, iron oxide nanoparticles on acid treated MWCNTs as a conductive platform are combined to enhance the drawbacks of $Fe_3O_4$ such as low electrical conductivity and volume expansion during the alloying/dealloying process. Enhanced performance was achieved due to a synergistic effect between electrically 3D networks of conductive MWCNTs and the high Li ion storage ability of $Fe_3O_4$ nanoparticles (iNPs).

• 한국분말재료학회지
• /
• 제16권5호
• /
• pp.310-315
• /
• 2009

Ultra-fine TiC/Co composite powder was synthesized by the carbothermal reduction process without wet chemical processing. The starting powder was prepared by milling of titanium dioxide and cobalt oxalate powders followed by subsequent calcination to have a target composition of TiC-15 wt.%Co. The prepared oxide powder was mixed again with carbon black, and this mixture was then heat-treated under flowing argon atmosphere. The changes in the phase, mass and particle size of the mixture during heat treatment were investigated using XRD, TG-DTA and SEM. The synthesized oxide powder after heat treatment at 700$^{\circ}C$ has a mixed phase of TiO$_2$ and CoTiO$_3$ phases. This composite oxide powder was carbothermally reduced to TiC/Co composite powder by the solid carbon. The synthesized TiC/Co composite powder at 1300$^{\circ}C$ for 9 hours has particle size of under about 0.4 $\mu$m.

• Carbon letters
• /
• 제26권
• /
• pp.43-50
• /
• 2018

In this research, a novel and efficient quinoline thioacetamide functionalized magnetic graphene oxide composite ($GO@Fe_3O_4@QTA$) was synthesized and utilized for dispersive magnetic solid phase preconcentration of Cd(II) and Ni(II) ions in urine and various food samples. A number of diverse methods were employed for characterization of the new nanosorbent. The design of experiments approach and response surface methodology were applied to monitor and find the parameters that affect the extraction performance. After sorption and elution steps, the concentrations of target analytes were measured by employing FAAS. The highest extraction performance was achieved under the following experimental conditions: pH, 5.8; sorption time, 6.0 min; $GO@Fe_3O_4@QTA$ amount, 17 mg; 2.4 mL $1.1mol\;L^{-l}$ $HNO_3$ solution as the eluent and elution time, 13.0 min. The detection limit is 0.02 and $0.2ng\;mL^{-1}$ for Cd(II), and Ni(II) ions, respectively. The accuracy of the new method was investigated by analyzing two certified reference materials (sea food mix, Seronorm LOT NO 2525 urine powder). The interfering study revealed that there are no interferences from commonly occurring ions on the extractability of target ions. Finally, the new method was satisfactorily employed for rapid extraction and determination of target ions in urine and various food samples.

• 한국분말재료학회지
• /
• 제9권3호
• /
• pp.167-173
• /
• 2002

A new approach to produce nanostructured WC/Co composite powders by a mechanochemical process was made to improve the mechanical properties of advanced hardmetals. Homogeneous spherical W-Co salt powders were made by spray drying of aqueous solution from ammonium metatungstate($(NH_4)_6(H_2W_{12}O_{40})\cdo4H_2O$,AMT) and cobalt nitrate hexahydrate (Co(NO$_3$)$_2$.6$H_2O$). spray dried W-Co salt powders were calcined for 1 hr at $700^{\circ}C$ in atmosphere of air. The oxide powder was mixed with carbon black by ball milling and this mixture was heated with various temperatures and times in $H_2$. The $WO_3/CoWO_4$ composite oxide powders were obtained by calcinations at $700^{\circ}C$. The primary particle size of W/Co composite oxide powders by SEM was 100 nm. The reduction/carburization time decreased with increasing temperatures and carbon additions. The average size of WC particle carburized at $800^{\circ}C$ by TEM was smaller than 50 nm.

• 한국분말재료학회지
• /
• 제10권4호
• /
• pp.228-234
• /
• 2003

In the present study, the focus is on the synthesis of titanium carbide/cobalt composite powder by the spray thermal conversion process using metallic salt solution as the raw materials. Two types of oxide powders of Ti-Co-O system were prepared by the spray drying of two types of metallic salt solutions : titanium chloride-cobalt nitrate and $TiO_2$ powder-cobalt nitrate solutions. These oxide powders were mixed with carbon black, and then these mixtures were carbothermal reduced under a flowing argon atmosphere. The changes in the phase structure and thermal gravity of the mixtures during carbothermal reduction were analysed using XRD and TG-DTA. In the case of using the titanium chloride-cobalt nitrate solution, it could not be obtained TiC/Co composite powder due to contamination of the impurities during the spray drying of the solution. However, in tile case of using the $TiO_2$ powder-cobalt nitrate scullion, TiC-15 wt. %Co composite powder could be synthesized by the spray thermal conversion process. The synthesized TiC-15 wt. %Co composite powder at 120$0^{\circ}C$ for 2 hours has average particle size of 150 nm.

• 자원환경지질
• /
• 제46권5호
• /
• pp.445-453
• /
• 2013

의성 탑리리 오층석탑(국보 제77호)은 통일신라시대의 대표적인 석조문화재이다. 현재 이 석탑은 지속적인 풍화로 인해 전체적으로 흑색, 황색, 백색변색이 발생되어 있으며 백색변색이 발생한 부분에서 미세균열, 박리박락, 입상분해가 집중적으로 분포해 있다. 표면오염물에 대한 분석결과, 흑색변색은 망간산화물, 황색변색은 철산화물, 백색변색은 석고와 타라나카이트로 인해 발생한 것으로 확인하였다. 또한, 석탑에 발생한 물리적 훼손은 암석내부에서 석고의 결정화 작용으로 인해 발생한 것으로 판단된다. 따라서 의성 탑리리 오층석탑을 장기적으로 보존하기 위해서는 보존처리 매뉴얼에 따라 석고를 중심으로 표면오염물을 제거하고 P-XRF를 활용한 정기적인 모니터링이 요구된다.

• 한국분말재료학회지
• /
• 제11권3호
• /
• pp.253-258
• /
• 2004

We report a carbothermal reduction process for massive synthesis of monolithic W$_{18}$O$_{49}$ phase from tungsten oxide in the presence of carbon source. Carbon black powder was used as a carbon source and added to WO$_3$ by 40 weight percent. Bundles of W$_{18}$O$_{49}$ rods were formed over the temperature range of 80$0^{\circ}C$$^{\circ}C$ to 90$0^{\circ}C$. Pure W$_{18}$O$_{49}$ bundles could be separated from the mixture of W$_{18}$O$_{49}$ and residual carbon black powder. Field emission character of W$_{18}$O$_{49}$ phase was determined using the extracted W$_{18}$O$_{49}$ rods. Flat lamp fabricated from the W$_{18}$O$_{49}$ rods showed the turn-on field of 9.3 V/${\mu}m$.

• 한국식품영양과학회지
• /
• 제32권7호
• /
• pp.1011-1020
• /
• 2003

갈색도를 나타내는 420nm에서는 한국차의 경우 발효가 많이된 차일수록, 추출온도가 높을수록 흡광도가 증가되었다. 672nm에서는 녹차 및 반발효차에서 특징적인 peak를 보였고, 발효가 많이된 차일수록 감소되어 강발효차에서는 peak가 나타나지 않았다. 녹차 및 각 발효차 가루 및 차추출액의 색도는 모두 발효를 많이 시킨 차일수록 명도는 낮아지고, 적색도와 황색도는 높아지는 경향을 나타냈다. 발효정도가 같은 차라도 추출액의 온도가 높아질수록 명도는 감소하고 적색도와 황색도는 대체로 증가하는 경향을 나타냈다. 녹차와 각 발효차의 추출액에 대한 관능 검사의 결과 향미는 발효차의 경우 발효를 많이 시킨 차일수록 선호도가 높았으며 약발효차는 각 온도에서 향미에 대한 선호도는 가장 낮았다. 맛은 녹차의 경우 추출물의 온도가 60∼7$0^{\circ}C$일 때 가장 좋은 선호도를 보였고, 중발효차와 강발효차는 추출물의 온도가 9$0^{\circ}C$일 때 가장 선호도가 높았으며, 온도가 낮아질수록 선호도가 낮게 나타났다. 전체적인 차의 선호도는 녹차, 강발효차, 중발효차, 약발효차의 순이었다. 향기성분은 녹차에서는 76종의 향기성분이 확인되었고, 총함량은 129.919 mg/kg이었으며, 주요성분은 linalool, geraniol, nerolidol, benzyl alcohol과 linalool oxide로 나타났다. 약발효차는 76개의 peak가 확인되었고 총함량은 159.077 mg/kg으로 나타났으며, 주요성분은 geraniol, linalool, linalool oxide, ethanol, benzyl alcohol 등의 함량이 높았으며, 녹차의 성분과 유사하였다. 중발효차는 79개의 휘발성성분이 확인되었고 총함량은 455.608 mg/kg이었으며, 주요성분은 ethyl acetate, 3-methylbutanal, ethanol, (E)-2-hexenal, (E)-geraniol, linalooloxide으로 나타났다. 강발효차는 79개의 휘발성 향기성분이 확인되었고, 총함량은 680.521mg/kg이며 주요성분은 3-methylbutanal, ethyl acetate, geraniol, ethanol, (E)-2-hexenal, hexanal, linalooloxide로 나타났다. 발효가 많이 진행된 차일수록 향기성분의 함량은 증가하였고, 알데히드의 함량이 현저하게 증가하였다.

• 상하수도학회지
• /
• 제24권3호
• /
• pp.341-349
• /
• 2010

It is well known that manganese is hard to oxidize under neutral pH condition in the atmosphere while iron can be easily oxidized to insoluble iron oxide. The purpose of this study is to identify removal mechanism of manganese in the D water treatment plant where is treating bank filtered water in aeration and rapid sand filtration. Average concentration of iron and manganese in bank filtered water were 5.9 mg/L and 3.6 mg/L in 2008, respectively. However, their concentration in rapid sand filtrate were only 0.11 mg/L and 0.03 mg/L, respectively. Most of the sand was coated with black colored manganese oxide except surface layer. According to EDX analysis of sand which was collected in different depth of sand filter, the content of i ron in the upper part sand was relatively higher than that in the lower part. while manganese content increased with a depth. The presence of iron and manganese oxidizing bacteria have been identified in sand of rapid sand filtration. It is supposed that these bacteria contributed some to remove iron and manganese in rapid sand filter. In conclusion, manganese has been simultaneously removed by physicochemical reaction and biological reaction. However, it is considered that the former reaction is dominant than the latter. That is, Mn(II) ion is rapidly adsorbed on ${\gamma}$-FeOOH which is intermediate iron oxidant and then adsorbed Mn(II) ion is oxidized to insoluble manganese oxide. In addition, manganese oxidation is accelerated by autocatalytic reaction of manganese oxide. The iron and manganese oxides deposited on the surface of the sand and then are aged with coating sand surface.

• Bulletin of the Korean Chemical Society
• /
• 제30권1호
• /
• pp.219-223
• /
• 2009

$TiO_2$ doped with $Er^{3+\;and\;Yb^{3+}$ was used for fabricating a scattering layer and a nano-crystalline $TiO_2$ electrode layer to be used in dye-sensitized solar cells. The material was prepared using a new sol-gel combustion hybrid method with acetylene black as fuel. The $Er^{3+}$-$Yb^{3+}$ co-doped titanium oxide powder synthesized at 700oC had embossed structure morphology with a size between 27 to 54 nm that agglomerated to produce micron size particles, as observed by the scanning electron micrographs. The XRD patterns showed that the $Er^{3+}$-$Yb^{3+}$ co-doped titanium oxide had an amorphous structure, while using the same method without doping $Er^{3+}\;or\;Yb^{3+},\;TiO_2$ was obtained in the crystallite form with thea dominance of rutile phase. Fabricating a bilayer structure consisting of nano-crystalline $TiO_2$ and the synthesized $Er^{3+}$-$Yb^{3+}$ co-doped titanium oxide showed better scattering property, with an overall increase of 15.6% in efficiency of the solar cell with respect to a single nano-crystalline $TiO_2$ layer.