• Title/Summary/Keyword: bit-error-rate(BER)

Search Result 887, Processing Time 0.03 seconds

SER/BER Analysis for 2-by-N MIMO-STBC Systems in Rayleigh Fading Channels (레일레이 페이딩 채널에서 2-by-N MIMO-STBC 시스템의 SER/BER 성능 해석)

  • Gil, Gye-Tae;Lee, Seong-Choon;Hyun, Kwang-Min
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.35 no.6C
    • /
    • pp.547-553
    • /
    • 2010
  • In this paper, novel approximated closed-form expressions of the SER(Symbol Error Rate) and BER(Bit Error Rate) are presented for the multi-input multi-output space-time block coding(MIMO-STBC) system employing two transmit and N receive antenna(s) in Rayleigh fading channels. Assuming a zero-forcing equalizer and a single-symbol maximum-likelihood (ML) decoder, the formulas are derived for the SER and BER, and then their approximated counterparts are also derived. In the derivation of the approximated expressions, acurve-fitting model is adopted that can eliminate the integral operators in the exact expressions.

Performance of differential Space-time Block Coded MIMO System using Cyclic Delay Diversity

  • Kim, Yoon-Hyun;Yang, Jae-Soo;Kim, Jin-Young
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 2007.08a
    • /
    • pp.41-45
    • /
    • 2007
  • Multi-input multi-output (MIMO) system can increase data rate, capacity and bit error rate (BER) performance compare to traditional single antenna system. However MIMO technique is pointed out the problem that has high complexity to design receiver. So a recent trend of research on the MIMO system pays more attention to simplified implementation of receiver structure. In this paper, we propose differential space time block code (STBC) for MIMO system with cyclic delay diversity (CDD). This structure can provide a very close performance to that of the conventional diversity scheme with maximum likelihood (ML) detection without channel estimation block while the receiver structure is highly simplified. Bit error rate (BER) performance of the proposed system is simulated for an AWGN channel by theoretical and simulated approaches. The results of this paper can be applicable to the 4G mobile multimedia communication systems.

  • PDF

On the Practical Physical-Layer Network Coding with Partially Overlapped Packets (부분 패킷 중첩 환경에서 물리계층 네트워크 코딩에 관한 연구)

  • Lim, Hyeonwoo;Jung, Bang Chul;Ban, Tae-Won;Sung, Kil-Young
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.19 no.12
    • /
    • pp.2813-2819
    • /
    • 2015
  • In this paper, we investigate the physical layer network coding (PNC) technique in a two-way relay channel (TWRC) where two source nodes send and receive data with each other via a relay node. In particular, we consider the communication scenario where packet length from the two sources is different from each other. We analyze the bit error rate (BER) of the received packet at the relay node according to degree of overlapping between two packets. The BER of the short packet remains unchanged regardless of the degree of overlapping since the entire packet is overlapped with the longer packet, while the BER of the longer packet becomes improved as the degree of overlapping decreases. Thus, we need a novel transmission scheme to enhance BER performance of the PNC technique in TWRC environments since the overall BER performance of the PNC technique at the relay node depends on the worse BER between two ovelapping packets' BERs.

Tap-length Optimization of Decision Feedback Equalizer Using Genetic Algorithm (유전자 알고리즘을 이용한 결정 궤환 등화기의 탭 길이 최적화)

  • Son, Ji-hong;Kim, Ki-man
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.19 no.8
    • /
    • pp.1765-1772
    • /
    • 2015
  • In the underwater acoustic communication channels, multipath reflection become the cause of obstacle. Generally, equalizer has been applied to overcome these problems. In this paper, the method was proposed to optimize tap-length of decision feedback equalizer using genetic algorithm. After inputting feed-forward filter length and feed-back filter length as genetic information of the genetic algorithm, it optimize tap-length using BER(bit error rate) calculation in accordance with object function. The object function consist of decision feedback equalizer and BER calculation. For the purpose of BER calculation in the object function, the method was proposed to optimize the tap-length of decision feedback equalizer with genetic algorithm using preamble signals. As a result of experiments, the optimized BER is 0.0355 for signals which were received through a 25m receiver and which were applied to calculate BER merely using preamble signals in object function. When all data were used to calculate BER in object function, the optimized BER is 0.0215.

Performance Analysis of Generic Bit Error Rate of M-ary Square QAM (정방형 M진 직교 진폭 변조 신호의 일반화된 BER 성능 분석)

  • Cho, Kyong-Kuk;Yoon, Dong-Weon
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.38 no.11
    • /
    • pp.41-48
    • /
    • 2001
  • The exact general bit error rate (TIER) expression of M-ary square quadrature amplitude modulation (QAM) for arbitrary M has not been derived so far. In this paper, a generalized closed-form expression for the BER performance of M-ary square QAM with Gray code bit mapping is derived and analyzed in the presence of additive white Gaussian noise (AWGN) channel. The derivation is based on the consistency of the format in signal constellation o[ Gray coding and it has been derived from the results for M-16, 64, and 256.

  • PDF

Comparison of The BER Performance Using Channel coding Depending on The Transmitter-receiver depth in The Underwater Channel (수중통신채널에서 채널코딩을 이용한 송수신 깊이별 에러오율 비교 연구)

  • Lee, Duck-Soo;Shim, Tae-Bo
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.48 no.1
    • /
    • pp.32-37
    • /
    • 2011
  • Underwater communication is affected by reverberation and noise characteristics of the underwater channel and time delay takes place by multipath. Hence, Signal is distorted and a lot of error is generated in the transmitting/receiving by multipath effects, so a channel coding for error correction is required. We propose a channel coding algorithm which is possible to correct error of received signal. We compare and analyze BER(bit error rate) performance depending on the depth of each transmitter-receiver using channel coding algorithm. QPSK was used as a modulation method, and 1/2 code rate convolution coding was used as a coding rate. A convolution coding method shows increase of BER performances.

Audio Watermark Design Using Hilbert Transform

  • Lee, Jin-Geol
    • The Journal of the Acoustical Society of Korea
    • /
    • v.25 no.2E
    • /
    • pp.56-59
    • /
    • 2006
  • A novel audio watermark design using Hilbert transform is proposed, and its superiority of performance over the existing design using the absolute values of the audio signal is demonstrated experimentally with measurements of bit error rate (BER) in correlation based decoder. (Classification No. 3.3)

Performance Analysis of Coded FSK System for Multi-hop Wireless Sensor Networks (멀티 홉 무선 센서 네트워크를 위한 부호화된 FSK 시스템의 성능 해석)

  • Oh, Kyu-Tae;Roh, Jae-Sung
    • Journal of Advanced Navigation Technology
    • /
    • v.11 no.4
    • /
    • pp.408-414
    • /
    • 2007
  • Research advances in the areas of micro-sensor device and wireless network technology, has made it possible to develop energy efficient and low cost wireless sensor nodes. In this paper, the forward error control (FEC) scheme for lower power consumption and excellent BER(Bit Error Rate) performance during transmission propose in multi-hop wireless sensor network based on FSK modem. The FEC technique uses extra processing power related to encoding and decoding, it is need complex functions to be built into the sensor node. The probability of receiving a correct bit and codeword for relaying a frame over h nodes to the sink node is calculated as a function of channel parameter, number of hops, number of bits transmitted and the distance between the different nodes.

  • PDF

A Hybrid Multiuser Detection Algorithm for Outer Space DS-UWB Ad-hoc Network with Strong Narrowband Interference

  • Yin, Zhendong;Kuang, Yunsheng;Sun, Hongjian;Wu, Zhilu;Tang, Wenyan
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.6 no.5
    • /
    • pp.1316-1332
    • /
    • 2012
  • Formation flying is an important technology that enables high cost-effective organization of outer space aircrafts. The ad-hoc wireless network based on direct-sequence ultra-wideband (DS-UWB) techniques is seen as an effective means of establishing wireless communication links between aircrafts. In this paper, based on the theory of matched filter and error bits correction, a hybrid detection algorithm is proposed for realizing multiuser detection (MUD) when the DS-UWB technique is used in the ad-hoc wireless network. The matched filter is used to generate a candidate code set which may contain several error bits. The error bits are then recognized and corrected by an novel error-bit corrector, which consists of two steps: code mapping and clustering. In the former step, based on the modified optimum MUD decision function, a novel mapping function is presented that maps the output candidate codes into a feature space for differentiating the right and wrong codes. In the latter step, the codes are clustered into the right and wrong sets by using the K-means clustering approach. Additionally, in order to prevent some right codes being wrongly classified, a sign judgment method is proposed that reduces the bit error rate (BER) of the system. Compared with the traditional detection approaches, e.g., matched filter, minimum mean square error (MMSE) and decorrelation receiver (DEC), the proposed algorithm can considerably improve the BER performance of the system because of its high probability of recognizing wrong codes. Simulation results show that the proposed algorithm can almost achieve the BER performance of the optimum MUD (OMD). Furthermore, compared with OMD, the proposed algorithm has lower computational complexity, and its BER performance is less sensitive to the number of users.

Multi-Parameter Based Scheduling for Multi-user MIMO Systems

  • Chanthirasekaran, K.;Bhagyaveni, M.A.;Parvathy, L. Rama
    • Journal of Electrical Engineering and Technology
    • /
    • v.10 no.6
    • /
    • pp.2406-2412
    • /
    • 2015
  • Multi-user multi-input multi-output (MU-MIMO) system has attracted the 4th generation wireless network as one of core technique for performance enrichment. In this system rate control is a challenging problem and another problem is optimization. Proper scheduling can resolve these problems by deciding which set of user and at which rate the users send their data. This paper proposes a new multi-parameter based scheduling (MPS) for downlink multi-user multiple-input multiple-output (MU-MIMO) system under space-time block coding (STBC) transmissions. Goal of this MPS scheme is to offer improved link level performance in terms of a low average bit error rate (BER), high packet delivery ratio (PDR) with improved resource utilization and service fairness among the user. This scheme allows the set of users to send data based on their channel quality and their demand rates. Simulation compares the MPS performance with other scheduling scheme such as fair scheduling (FS), normalized priority scheduling (NPS) and threshold based fair scheduling (TFS). The results obtained prove that MPS has significant improvement in average BER performance with improved resource utilization and fairness as compared to the other scheduling scheme.