• Journal of Internet Computing and Services
• /
• v.8 no.5
• /
• pp.141-150
• /
• 2007

This paper proposes new Steganographic model for VoIP that has very effective method using low bit encoding. Most of Steganographic models using Low bit Encoding have two disadvantages; one is that the existence of hidden secret message can be easily detected by auditory, the other is that the capacity of stego data is low. To solve these problems, this method embed more than one bit in inaudible range, so this method can improve the capacity of the hidden message in cover data. The embedding bit position is determined by using a pseudo random number generator which has seed with remaining message length, so it is hard to detect the stego data produced by the proposed method. This proposed model is able to use not only to communicate wave file with hidden message in VoIP environment but also to hide vary information which is user basic information, authentication system, etc.

• The KIPS Transactions:PartA
• /
• v.18A no.6
• /
• pp.265-270
• /
• 2011

Even though 32-bit ISA based microprocessors are widely used more and more, 16-bit ISA based processors are still being frequently employed for embedded systems. Intel 8086, 80286, Motorola 68000, and ADChips AE32000 are the representatives of the 16-bit ISA based processors. However, due to less expressiveness of the 16-bit ISA from its narrow bit width, we need to execute more 16-bit instructions for the same implementation compared to 32-bit instructions. Because the number of executed instructions is a very important factor in performance, we have to resolve the problem by improving the expressiveness of the 16-bit ISA. In this paper, we propose a new pair register allocation algorithm to enhance an original graph-coloring based register allocation algorithm. Also, we explain about both the performance result and further research directions.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.5
• /
• pp.9-14
• /
• 2009

In this paper, we proposed a novel OTP unit bit of CMOS gate oxide antifuse using the standard CMOS process without additional process. The proposed OTP unit bit is composed of 3 transistors including an NMOS gate oxide antifuse and a sense amplifier of inverter type. The layout area of the proposed OTP unit bit is $22{\mu}m^2$ similar to a conventional OTP unit bit. The programming time of the proposed OTP unit bit is 3.6msec that is improved than that of the conventional OTP unit bit because it doesn't use high voltage blocking elements such as high voltage blocking switch transistor and resistor. And the OTP array with the proposed OTP unit bit doesn't need sense amplifier and bias generation circuit that are used in a conventional OTP array because sense amplifier of inverter type is included to the proposed OTP unit bit.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.2 s.314
• /
• pp.39-45
• /
• 2007

This paper presents a novel scheme that quickly searches for the sweet spot of multiple array antennas, and locks on to it for high-speed millimeter wavelength transmissions, when communications to another antenna array are disconnected. The proposed method utilizes a modified genetic algorithm, which selects a superior initial group through preprocessing in order to solve the local solution in agenetic algorithm. TDD (Time Division Duplex) is utilized as the transfer method and data controller for the antenna. Once the initial communication is completed for the specific number of individuals, no longer antenna's data will be transmitted until each station processes GA in order to produce the next generation. After reproduction, individuals of the next generation become the data, and communication between each station is made again. Simulation results of 1:1, 1:2, 1:5 array antennas confirmed the efficiency of the proposed method. The 16bit split is 8bit, but it has similar performance as 16bit gene.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12C
• /
• pp.1135-1141
• /
• 2007

In this paper, an adaptive bit-reliability mapping is proposed for the bit-level Chase combining in LDPC-coded high-order modulation systems. Contrary to the previously known bit-reliability mapping that assigns the information (or parity) bits to more (or less) reliable bit positions, the proposed mapping adaptively assigns codeword bits to the bit positions of various reliabilities by considering the characteristics of code and protection levels of bits in high-order modulation symbol. Compared with the symbol-level Chase combining and the constellation rearrangement bit mapping, the proposed mapping gives $0.7{\sim}1.3$ dB and $0.1{\sim}1.0$ dB performance gain at $FER=10^{-3}$ with no additional complexity, respectively. Adaptive bit-reliability mappings are derived for various environments and the validity of them is confirmed through simulation.

• Explosives and Blasting
• /
• v.38 no.1
• /
• pp.14-22
• /
• 2020

Bit damage is one of the primary causes of decreasing drilling efficacy. Nevertheless the management of bit ware and failure are often left for field engineers' experience. Thus it is imperative to establish a proper system to predict and manage the bit damage during the rock drilling process. In this study, the drilling sound signal has been recorded and analyzed using wavelet transform analysis to identify the exact moment of bit failure. Through the analysis wavelet time-frequency spectrums have been constructed and an abnormal point has been identified with 0.9 of wavelet transform value at the 652.8s on a frequency band around 500Hz. Furthermore it is also observed that the penetration rate of the damaged bit has been decreased to 23mm/s which is 9mm/sec lower than the average of undamaged bit. The study verifies that wavelet transform analysis can be used to build a system to diagnose the bit damage while drilling.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.714-725
• /
• 1997

This paper proposes an image compression method using the wavelet transform and bit-plane coding of wavelet coefficients. The hierarchical application of wavelet transform to an image produces one low resoluation(the subband with lowest frequency) image and several high frequency subbands. In the proposed method, the low resolution image is compressed by a lossless method at 8 bits per each coefficient. However, the high frequency subbands are decomposed into 8 bit planes. With an adptive block coding method, the decomposed bit planes are effectively compressed using localized edge information in each bit plane. In addition, the propsoed method can control bit rates by selectively eliminating lessimportant subbands of low significant bit planes. Experimental results show that the proposed scheme has better performance in the peak signal to noise ratio (PSNR) and compression rate than conventional image coding methods using the wavelet transform and vector quantization.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.2
• /
• pp.520-528
• /
• 2000

he speed of microprocessor getting faster, the data transfer width between the microprocessor and the memory becomes a critical part to limit the system performance. So the study of the computer architecture with the high code density is cmerged. In this paper, a tentative Bi-Length Instruction Set Computer(BISC) that consists of 16 bit and 32 bit length instructions is proposed as the high code density 32 bit microprocessor architecture. The 32 bit BISC has 16 general purpose registers and two kinds of instructions due to the length of offset and the size of immediate operand. The proposed 32 bit BISC is implemented by FPGA, and all of its functions are tested and verified at 1.8432MHz. And the cross assembler, the cross C/C++ compiler and the instruction simulator of the 32 bit BISC are designed and verified. This paper also proves that the code density of 32 bit BISC is much higher than the one of traditional architecture, it accounts for 130~220% of RISC and 130~140% of CISC. As a consequence, the BISC is suitable for the next generation computer architecture because it needs less data transfer width. And its small memory requirement offers that it could be useful for the embedded microprocessor.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.349-352
• /
• 2002

This paper describes a design of a 1bit Carry Propagate Free Adder/Subtracter (CPFA/S) VLSI using the Adiabatic Dynamic CMOS Logic (ADCL) circuit technology. Using a PSPICE simulator, energy dissipation of the ADCL 1bit CPFA/S is compared with that of the CMOS 1bit CPFA/S. As a result, energy dissipation of the proposed ADCL circuits is about 1/23 as low as that of the CMOS circuits. The transistors count, propagation-delay tittle and energy dissipation of the ADCL 4bit CPFA/S are compared with those of the ADCL 4bit Carry Propagate Adder/Subtracter (CPA/S). The transistors count and propagation-delay tittle are found to be reduced by 7.02% and 57.1%, respectively. Also, energy dissipation is found to be reduced by 78.4%. Circuit operation and performance are evaluated using a chain of the ADCL 1bit CPFA/S fabricated in a $1.21mutextrm{m}$ CMOS process. The experimental results show that addition and subtraction are operated with clock frequencies up to about 1㎒.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2015

In this paper, a 12-bit high resolution, power and area efficiency hybrid digital pulse width modulator (DPWM) with process and temperature (PT) calibration has been proposed for digital controlled DC-DC converters. The hybrid structure of DPWM combines a 6-bit differential tapped delay line ring-mux digital-to-time converter (DTC) schema and a 6-bit counter-comparator DTC schema, resulting in a power and area saving solution. Furthermore, since the 6-bit differential delay line ring oscillator serves as the clock to the high 6-bit counter-comparator DTC, a high frequency clock is eliminated, and the power is significantly saved. In order to have a simple delay cell and flexible delay time controllability, a voltage controlled inverter is adopted to build the deferential delay cell, which allows fine-tuning of the delay time. The PT calibration circuit is composed of process and temperature monitors, two 2-bit flash ADCs and a lookup table. The monitor circuits sense the PT (Process and Temperature) variations, and the flash ADC converts the data into a digital code. The complete circuits design has been verified under different corners of CMOS 0.18um process technology node.