• 제목/요약/키워드: bisphenol A diglycidyl ether

검색결과 94건 처리시간 0.031초

실리콘 변성 에폭시 코팅 액의 제조와 물성 (Preparation and Properties of Silicone-Modified Epoxy Coating Materials)

  • 김진경;박승우;황희남;강두환;강호종
    • 공업화학
    • /
    • 제25권4호
    • /
    • pp.352-356
    • /
    • 2014
  • ${\alpha},{\omega}$-Aminopropylpolydimethylsiloxane을 bisphenol-A diglycidyl ether (DGEBA)계 이관능성 에폭시 수지와 반응시켜 polydimethylsiloxane (PDMS)의 양 말단에 에폭시가 도입된 실리콘 변성 에폭시 수지(EMPDMS)를 제조한 다음 alkylesteraminopropyl alkoxy silane (XD 5607)을 반응시켜 PDMS가 도입된 에폭시 hybrid 화합물(EMPDMSH)을 제조하고 이를 FT-IR, $^1H$-NMR 및 $^{29}Si$-NMR로 구조를 확인하였다. EMPDMSH base 수지에 용매를 혼합하여 코팅 액을 제조하였으며, 이를 에폭시/유리 섬유 복합재료로 얻어진 필름에 도포하고 경화시킨 후 base수지 중에 함유된 PDMS의 함량에 따른 물성을 측정하였다. 코팅 면의 접촉각을 측정한 결과 기존의 에폭시 수지로 코팅하여 얻은 코팅 면에 비해 접촉각이 $41^{\circ}$에서 $71^{\circ}$로 약 $30^{\circ}$정도 증가되고 있어 코팅 면에 PDMS가 나타나 있음을 확인할 수 있었다. 또한 접착력 및 표면 평활도 개선효과 측정 결과 에폭시 자체 코팅 액이나 일반적으로 많이 사용되고 있는 아크릴계 코팅 액 보다 5B 등급의 뛰어난 접착력을 나타내었고 평활도 개선 효과도 우수함을 나타내었다.

Mercaptan 경화제에 의한 저온속경화 에폭시의 경화거동에 관한 연구 (Study on Cure Behavior of Low Temperature and Fast Cure Epoxy with Mercaptan Hardener)

  • 엄세연;서상범;이기윤
    • 폴리머
    • /
    • 제37권2호
    • /
    • pp.240-248
    • /
    • 2013
  • 본 연구에서는 DGEBA(diglycidyl ether of bisphenol A)를 사용한 에폭시/mercaptan 경화제의 경화 반응 거동을 에폭시/아민 유도체형 경화제와 비교하여 연구하였다. 경화 반응 거동은 DSC 분석에 의해 승온 및 등온의 조건에서 경화되는 과정을 연구하였다. DSC의 승온 실험에서는 Kissinger 법을 이용하였으며, 등온 실험에서는 Kamal의 속도모델을 이용하여 분석하였다. 결과적으로 활성화 에너지는 아민 유도체형 경화제를 사용하였을 때 약 40 kcal/mol이고, mercaptan 경화제를 사용하였을 때 약 28에서 19 kcal/mol로 -SH 관능기가 증가할수록 감소하였다. 에폭시/아민 유도체형 경화제는 약 $90^{\circ}C$ 이상에서 경화 반응이 개시되는 반면, 에폭시/mercaptan 경화제에서는 경화 반응 개시 온도가 약 $80^{\circ}C$ 이내로 낮아지고, 반응 속도가 상승하여 반응 시간이 10분 이내로 단축되었다. 또한 에폭시/mercaptan 경화제계는 자기 촉매 반응 모델을 따르는 것을 확인하였고 약 20~40%의 경화도에서 최대 반응속도를 나타내었다.

DGEBA/MDA/SN 계의 파괴 거동 (Fracture behavior of DGEBA/MDA/SN System)

  • 조성우;심미자;김상욱
    • 한국재료학회지
    • /
    • 제3권2호
    • /
    • pp.140-144
    • /
    • 1993
  • 열경화성 에폭시 수지의 물성 중 담약성을 개선하기 위해 새로운 반응성첨가제 succinonitrile(SN)을 Diglycidy1 ether of bisphenol A(DGEBA(-4,4'-methylene dianiline(MDA)계에 도입하여 현재 널리 사용되고 있는 유리섬유 복합재료에 매트릭스로 사용될 경우에 있어서 파괴되는 거동을 미시적으로 고찰하였다. 그 결과 post debond friction 에너지가 파괴 거동을 주도하고 있으며, 다음으로 pull-out에너지 그리고 debonding 에너지 순으로 나타났다. 따라서 파괴 거동에 미치고 있는 중요한 요인은 섬유와 매트릭스 간의 경계면 전단 응력이 크게 좌우함을 알 수 있었으며, 이때 반응성 첨가제 SN은 전단응력을 떨어뜨리는 것으로 고찰되었다.

  • PDF

Synthesis of Aniline-Based Azopolymers for Surface Relief Grating

  • Jung, Woo-Hyuk;Ha, Eun-Ju;Chung, Il-Doo;Lee, Jang-Oo
    • Macromolecular Research
    • /
    • 제16권6호
    • /
    • pp.532-538
    • /
    • 2008
  • Epoxy-based azopolymers were synthesized by the reaction of the diglycidyl ether of bisphenol A (DGEBA) or N,N-diglycidyl aniline (DGA) with disperse orange 3 (DO3) to give poly(DGEBA-co-DO3) or poly(DGA-co-DO3), respectively. Aniline-based azopolymers prepared from poly(DGA-co-An) precursors, synthesized by the reaction of DGA with aniline, were produced by the post-azo coupling reaction with diazonium salts containing various substituents. Holographic gratings were carried out to measure the diffractive efficiencies (DE) for the interference patterns of the $Ar^+$ laser from 50 to $300\;mW/cm^2$ intensity. The shorter repeating unit with higher chromophore density induced deeper surface relief gratings (SRG). Large surface gratings were observed for the aniline-based azopolymers with -COOH substituents, as compared with those for epoxy-based azopolymers. The aniline-based azopolymers with dimerized chromophores and various substituents were also synthesized to observe the effect of chromophore substituents and dimerization on the holography. The dimerized chromophores were more sensitively photoisomerized by the $Ar^+$ laser beam, and demonstrated a larger grating than that with one azo bond.

Diglycidy1 ether of bisphenol A-Methylene dianiline-Succinonitrile계의 열경화 거동 (Thermost behavior of Diglycidyl ether of bisphenol A-Methylene dianiline Succinonitrile System)

  • 심미자;김상욱
    • 한국재료학회지
    • /
    • 제3권1호
    • /
    • pp.95-100
    • /
    • 1993
  • Diglycidy1 ether of bisphenol A(DGEBA)와 강화제로서 4, 4'-methylene dianiline(MDA)에 반응성 첨가제 succinonitrile(SN)을 첨가한 새로운 계를 적외선 흡수분광도법(FT-IR)으로 경화반을 메카니즘을 연구하였으며, 이것은 반응성 첨가제의 함량을 다르게 첨가시켜 각각 8$0^{\circ}C$부터 17$0^{\circ}C$까지 3$0^{\circ}C$ 간격으로 1시간동안 경화시킨 시료를 가지고 고찰하였다. 그 결과 제 1차 아민 수소와 에폭사이드기의 반응, 제 2차 아민 수소와 에폭사이드기의 반응, 에폭사이드기와 수산기와의 반응에 추가적으로 제 1차 아민수소와 SN의 니트릴기와의 반응, 니트릴기과 수산기와의 반응이 일어나 최종적으로 주쇄간 결합 길이를 연장시키고 있음을 알 수 있었다.

  • PDF

통조림관 코팅제에서 식품유사용매로 이행되는 비스페놀류의 분석 (Determination of Bisphenols Migrating from Epoxy Can Coatings to Aqueous Food Simulants)

  • 강경모;신효선
    • 한국식품과학회지
    • /
    • 제32권3호
    • /
    • pp.570-577
    • /
    • 2000
  • 세가지 식품유사용매(증류수, 4% acetic acid, 20% ethanol)중의 비스페놀류(BPF, BPA, BFDGE, BADGE)를 형광검출기의 역상 HPLC와 GC/MSD에 의해 분석하는 방법을 제안하였다. 각 비스폐놀류는 $5{\sim}800\;{\mu}g/L$의 검량선에서 상관계수 0.9998 이상이었고 검출한계는 $1.2\;{\mu}g$이하였다. $200\;{\mu}g/L$에서의 정밀도는 3.1%이하였다. 각 식품유사용매에 비스페놀류를 일정량씩 첨가하여 동시 분석하였을 때 BPF와 BPA의 회수율은 95% 이상이었고, BFDGE와 BADGE는 약 80%였으나, 개별 첨가하였 때는 BFDGE와 BADGE 회수율이 95%이상으로 증가하였다. 이 때 검출한계는 모두 $0.40\;{\mu}g$이하였다. Epoxy phenol, modified epoxy, epoxy ester phenol 및 thermoset vinyl의 재질로 내부 코팅한 통조림관에서 식품유사용매로 이행되는 비스페놀류는 역상 HPLC에 의한 정량과 GC/MSD로 확인하였다 모든 재질에서 3가지 식품유사용매에 의해 BPF, BFDGE, BADGE는 검출되지 않았으나 4% acetic acid와 20% ethanol에 의해 modified epoxy를 제외한 재질에서 모두 BPA가 검출되었다.

  • PDF

Developmental Toxicity by Exposure to Bisphenol A Diglycidyl Ether during Gestation and Lactation Period in Sprague-dawley Male Rats

  • Hyoung, Un-Jun;Yang, Yun-Jung;Kwon, Su-Kyoung;Yoo, Jae-Hyoung;Myoung, Soon-Chul;Kim, Sae-Chul;Hong, Yeon-Pyo
    • Journal of Preventive Medicine and Public Health
    • /
    • 제40권2호
    • /
    • pp.155-161
    • /
    • 2007
  • Objectives : Bisphenol A diglycidyl ether (BADGE) is the major component in commercial liquid epoxy resins, which are manufactured by co-reacting bisphenol A with epichlorohydrin. This study was performed to show the developmental effects of prenatal and postnatal exposures to BADGE in male rat offspring. Methods : Mated female rats were divided into four groups, each containing 12 rats. The dosing solutions were prepared by thoroughly mixing BADGE in corn oil at the 0, 375, 1500 and 3000 mg/kg/day concentrations. Mated females were dosed once daily by oral gavage on gestation day (GD) 6 - 20 and postnatal day (PND) 0 - 21. Pregnant female dams were observed general symptoms and body weight. Also, male pups were observed the general symptoms, body weight, developmental parameters (e.g. anogenital distance, pina detachment, incisor eruption, nipple retention, eye opening, testis descent), organ pathologic changes and hormone levels of plasma. Results : Pregnant rats treated with BADGE died at a rate of about 70% in the 1500 mg/kg/day group and all rats treated with 3000 mg/kg/day died. Body weight, for male pups treated with doses of 375 mg/kg/day, was significantly lower than in the control group at PND 42, 56, and 63 (p<0.05). Evaluation of body characteristics including; separation of auricle, eruption of incisor, separation of eyelid, nipple retention, descent of testis, and separation of the prepuce in the BADGE treated group showed no difference in comparisons with the control group. AGD and adjusted AGD (mm/kg) for general developmental items in BADGE 375 mg/kg/day treated pups tended to be longer than in controls, however, these differences were not statistically significant. Relative weights of adrenal gland, lung (p<0.05), brain, epididymis, prostate, and testis (p<0.01) were heavier than in control in measures at PND 9 weeks. There were no significant changes in comparisons of histological findings of these organs. Loss of spermatids was observed in the seminiferous tubule at PND 9 weeks, but no weight changes were observed. The plasma estrogen levels were similar in the control and treatment groups at PND 3, 6 and 9 weeks. The plasma testosterone levels in the control group tended to increase with age. However, in the BADGE 375 mg/kg/day treated male pups it did not tend to increase. Conclusions : These findings suggest that BADGE is a chemical that has developmental effects consistent with it being an endocrine disruptor.

Synthesis of a Novel Phosphorus-containing Flame Retardant for Epoxy Resins

  • Xu, Hong-Jun;Jin, Fan-Long;Park, Soo-Jin
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권11호
    • /
    • pp.2643-2646
    • /
    • 2009
  • In this study, a novel phosphorus-containing flame retardant copolymer of spirocyclic pentaerythritol di(phosphate monochloride) and bisphenol S (SPD-BS) was successfully synthesized and used as a flame retardant in diglycidyl ether of bisphenol A (DGEBA) epoxy resins. The chemical structure of the SPD-BS was characterized using FT-IR and $^1H$ NMR spectra. The thermal properties were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The effects of SPD-BS and nano-$CaCO_3$ on the flame-retardant properties of DGEBA/SPD-BS systems were evaluated by measurement of the burning rate. As a result, the thermal stabilities of the DGEBA/SPD-BS systems were decreased with increasing SPD-BS content. The flame-retardant properties and char yields of the systems were significantly increased when SPD-BS content increased. The synergism of nano-$CaCO_3$ incorporation on flame retardancy was found for the DGEBA/SPD-BS systems.

Effect of an Electric Field on the AC Electrical Treeing in Various Epoxy/Reactive Diluent Systems

  • Bang, Jeong-Hwan;Park, Jae-Jun
    • Transactions on Electrical and Electronic Materials
    • /
    • 제14권6호
    • /
    • pp.308-311
    • /
    • 2013
  • The effect of an electric field on the ac electrical treeing in various epoxy/reactive diluent systems was studied in a needle-plate electrode geometry. Diglycidyl ether of bisphenol A (DGEBA) type epoxy was used as a base resin, and 1,4-butanediol diglycidyl ether (BDGE) or polyglycol (PG) as a reactive diluent was introduced to the DGEBA system, in order to decrease the viscosity of the DGEBA epoxy system. BDGE was acted as a chain extender, and PG acted as a flexibilizer, after the curing reaction. To measure the treeing initiation time and the propagation rate, three constant alternating currents (ac) of 10, 13 and 15 kV/4.2 mm (60 Hz) were applied to the specimen, in a needle-plate electrode arrangement, at $30^{\circ}C$ of insulating oil bath. When 10 kV/4.2 mm (60 Hz) was applied, the treeing initiation time and the propagation rate in the DGEBA system were 356 min and $1.10{\times}10^{-3}$ mm/min, respectively, those in the DGEBA/BDGE system were 150 min and $1.14{\times}10^{-3}$ mm/min, respectively. Those in the DGEBA/PG system were 469 min and $1.05{\times}10^{-3}$ mm/min, respectively. As 15 kV/4.2 mm (60 Hz) was applied, the propagation rate in the DGEBA system was $5.41{\times}10^{-3}$ mm/min, and that in the DGEBA/PG system was $1.42{\times}10^{-3}$ mm/min. These values meant that PG could be used as a reactive diluent in the DGEBA system, without the deterioration of the insulation breakdown property.

An experimental study on strength of hybrid mortar synthesis with epoxy resin, fly ash and quarry dust under mild condition

  • Sudheer, P.;Muni Reddy, M.G.;Adiseshu, S.
    • Advances in materials Research
    • /
    • 제5권3호
    • /
    • pp.171-179
    • /
    • 2016
  • Fusion and characterization of bisphenol-A diglycidyl ether based thermosetting polymer mortars containing an epoxy resin, Fly ash and Rock sand are presented here for the Experimental study. The specimens have been prepared by means of an innovative process, in mild conditions, of commercial epoxy resin, Fly ash and Rock sand based paste. In this way, thermosetting based hybrid mortars characterized by a different content of normalized Fly ash and Rock sand by a homogeneous dispersion of the resin have been obtained. Once hardened, these new composite materials show improved compressive strength and toughness in respect to both the Fly ash and the Rock sand pastes since the Resin provides a more cohesive microstructure, with a reduced amount of micro cracks. The micro structural characterization allows pointing out the presence of an Interfacial Transition Zone similar to that observed in cement based mortars. A correlation between micro-structural features and mechanical properties of the mortar has also been studied.