• Journal of The Korean Society of Agricultural Engineers
• /
• v.49 no.1
• /
• pp.67-76
• /
• 2007

Bioventing is commonly used for petroleum hydrocarbon (PHC) spills. This process provides better subsurface oxygenation, thus stimulating degradation by indigenous microorganisms. Therefore soil vapor monitoring points (VMPs) are extremely important in determining the potential effectiveness of bioventing and in long-term monitoring of bioventing progress. In this study in-situ soil gas monitoring well (GMW) was developed and presented the pilot test results which recover the contaminated site by bioventing method. The result of application was successful and it was expected that GMW developed could be applied to the evaluation procedure of bioventing effectiveness and long-term remediation potential.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.05a
• /
• pp.137-140
• /
• 2000

The purpose of this study is to see the effect of SVE (Soil Vapor Extraction) and Bioventing (biostimulation) hydrocarbon contaminated areas. The removal rate of VOC for three weeks were 17.43 kg on 3.6 ㎥/hr at steady-state. In the application of Bioventing, every flow rate were tested, and it was found that 4.0 ㎥/hr were adequate for best control of the system. At this stage, the addition of microbial agent accelerated the biodegradation of the hydrocarbon.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.359-361
• /
• 2002

국내에서는 1990년대 이후부터 주유소 및 유류저장시설 부근의 토양 및 지하수오염에 관한 법이 제정되었으며 그와 관련된 복원 및 정화 기술개발에 관한 연구가 진행되고 있다. 그 중 미생물학적 대사를 이용하는 생물학적복원기술(Bioremediation)은 유류로 오염된 지역에서 정화 및 복원방법으로 적용되고 있으며 또한 경제적인 대안으로 제시되고 있다. Bioremediation기법중 하나인 bloventing은 운전 및 처리비용의 감소와 효율의 향상적인 측면에서 여러 연구자들에 의해 수행되고 있다. 기존에는 오염토양에 대한 물리ㆍ화학적 분석과 미생물 활성에 미치는 인자의 측정이 주를 이루었다. 그러나, 최근에는 토양 가스내 $CO_2$ $O_2$의 측정ㆍ분석을 통한 분해율 평가와 탄화수소 분해에 대한 경과 및 복원시간을 예측하고자 하는 연구가 이루어지고 있는 중이다. 본 연구의 목표는 유류오염지역을 복원하기 위한 기술 중 생물학적 복원기술(bioremediation)의 하나인 bioventing 기술의 국내 적용가능성을 알아보고 궁극적으로 국내 실정에 적합한 bioventing공법의 개발을 목표로 한다. 이를 위해 lab-scale bioventing process를 이용하여 생부해를 최대화시키고 오염성분의 휘발을 최소화시키는 bioventing system의 최적운전 mode(연속식, 간헐식)를 개발하기 위해 공기공급량과 생분해량, 그리고 휘발되는 탄화수소양과의 관계를 평가하는 연구를 수행하였다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1999.04a
• /
• pp.80-81
• /
• 1999

• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.1
• /
• pp.24-31
• /
• 2000

Soil air permeability and influence of radius in air injection/extraction tests were estimated. These are important factors in the determination of optimal design for SVE or bioventing system. For evaluation of the effects of air leakage from the ground surface on those factors, Theis (1935) and Hantush (1960) methods were used in the data analysis. The air permeability of the studied area was in the range of 1.64$\times$$10^{-7}$~5.66$\times$$10^{-6}$ $\textrm{cm}^2$, and this result would be used for the design of SVE or bioventing system.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.5
• /
• pp.8-15
• /
• 2016

Bioremediation, which uses microbes to degrade most organic pollutants in soil and groundwater, can be used in solving environmental issues in various polluted sites. In this research, a wind-driven bioventing system is built to degrade about 20,000 mg/kg of high concentration diesel pollutants in soil-pollution mode. The wind-driven bioventing test was proceeded by the bioaugmentation method, and the indigenous microbes used were Bacillus cereus, Achromobacter xylosoxidans, and Pseudomonas putida. The phenomenon of two-stage diesel degradation of different rates was noted in the test. In order to interpret the results of the mode test, three microbes were used to degrade diesel pollutants of same high concentration in separated aerated batch-mixing vessels. The data derived thereof was input into the Haldane equation and calculated by non-linear regression analysis and trial-and-error methods to establish the kinetic parameters of these three microbes in bioventing diesel degradation. The results show that in the derivation of μ_m (maximum specific growth rate) in biodegradation kinetics parameters, K_s (half-saturation constant) for diesel substance affinity, and K_i (inhibition coefficient) for the adaptability of high concentration diesel degradation. The K_s is the lowest in the trend of the first stage degradation of Bacillus cereus in a high diesel concentration, whereas K_i is the highest, denoting that Bacillus cereus has the best adaptability in a high diesel concentration and is the most efficient in diesel substance affinity. All three microbes have a degradation rate of over 50% with regards to Pristane and Phytane, which are branched alkanes and the most important biological markers.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.315-318
• /
• 2002

This study was performed to evaluate the effects of air flow rate and aeration mode on the treatment of bioventing for diesel-contaminated soil. Initial concentrations of diesel-contaminated soils were about 2,500 and 9,000mg/kg. Air flow rates were 30, 60, and 100mL/min, and air was injected in the continuous and the intermittent modes. TPH removal efficiency of intermittent aeration mode was higher than that of continuous aeration mode. Greater air flow rate than the value of guidance book was needed for bioventing.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1233-1241
• /
• 2000

The purpose of this study is to see the remediability and pilot system operating condition on diesel contaminated areas. Air permeability(k) and trend of gas phase ($O_2/CO_2/VOCs$) concentration to determine the remediation rate of the contaminated sites are very important. So we tested air permeability and trend of gas phase concentration. Throughout soil vapor extraction(SVE) and bioventing hybrid pilot test on different conditions, the range of air permeability(k) was 1985~1194 darcy. The tests result in soil vapor extraction and bioventing hybrid system was appropriate on this test sites, and the suitable injection air flow rate was $3.5m^3/hr$.

• Journal of Environmental Science International
• /
• v.17 no.1
• /
• pp.97-105
• /
• 2008

This study examined the contaminated soils with an indicator of TPH using SVE (Soil Vapor Extraction) and biological treatments. Their results are as follows. Water content in the polluted soils slowly decreased from 15% during the initial experimental condition to 10% during the final condition. Purification of polluted soils by Bioventing system is likely to hinder the microbial activity due to decrease of water content. Removal rate of TPH in the upper reaction chamber was a half of initial removal rate at the 25th day of the experiment. The removal rate in the lower reaction chamber was 45% with concentration of 995.4 mg/kg. When the Bioventing is used the removal rate at the 14th day of the experiment was 53%, showing 7 day shortenting. Since the Bioventing method control the microbial activity due to dewatering of the polluted soil, SVE method is likely to be preferable to remove in-situ TPH. The reactor that included microbes and nutrients showed somewhat higher removal rate of TPH than the reactor that included nurtients only during experimental period. In general, the concentration showed two times peaks and then decreased, followed by slight variation of the concentration in low concentration levels. Hence, in contrast to SVE treatment, the biological treatment tend to show continuous repetitive peaks of concentration followed by concentration decrease.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.11a
• /
• pp.160-165
• /
• 2005

Bioventing efficiency was compared in a continuous and an intermittent(6hr injection and 6hr rest) air injection mode. Two lab-scale columns which packed with 5kg of soil artificially contaminated by diesel oil were operated. The columns were maintained at the $25^{\circ}C{\pm}2.5$ in order to minimize the effect of exterior temperature variation. The flow rate of air injection mode were maintained constantly at the flow rate of 10ml/min. The moisture of the columns was stably maintained at $60{\sim}80%$ of field capacity. The nutrient compounds were added to make C : N : P ratio as 100 : 10 : 1. The continuous and intermittent injection modes showed 67.56% and 69.63%reduction of initial TPH concentration during 90 days, respectively. The loss of diesel oil by volatilization in the continuous and intermittent injection modes were about 5% and 1%, respectively.