• Microbiology and Biotechnology Letters
• /
• v.36 no.1
• /
• pp.1-5
• /
• 2008

Negative environmental consequences of fossil fuels and the concerns about their soaring prices have spurred the search for alternative energy sources. While other alternative energies-like solar, wind, geothermal, hydroelectric, and tidal-offer viable options for electricity generation, around 40% of total energy consumption requires liquid fuels like gasoline or diesel fuel. This is where bio-energy/biofuels is especially attractive, where they can serve as a practical alternative to oil. The production of liquid biofuels for transportation will depend upon a stable supply of large amount of inexpensive cellulosic biomass obtained on a sustainable basis. This paper reviewed development status of transportation bio-energy for vehicles, technical barriers to the production of cellulosic ethanol, and the global future of bio-diesel and ethanol production.

• Microbiology and Biotechnology Letters
• /
• v.21 no.6
• /
• pp.622-627
• /
• 1993

Rhodospirillum rubrum P17 was used to investigate the pontential for the treatment of soybean curd waste and for the utilization of the biomass produced. The maximal biomass production and COD removal from the waste water were obtained at 30C, pH 7.0 under 2,500lux production and 50 rpm of agitation. The initial COD level of the soybean curd waste water was 3,240mg/l, and after 4 days of cultivation in batch culture, 3.46g/l of cells was obtained and COD level of the waste water reduced to 150mg/l (COD removal rate 95.4%).

• Journal of Hydrogen and New Energy
• /
• v.27 no.4
• /
• pp.386-403
• /
• 2016

Biofuels produced from biomass can be substituted for petroleum fuels due to GHG reduction, sustainability and environmental friendly. The process technologies that convert biomass into biofuels are varied and depend on the feedstocks. Microalgae are considered to be one of the most promising alternative source to the conventional feedstocks for biofuel. Microalgae can be converted to biodiesel, bioethanol, biogas and biojet fuel via thermolchemical and biochemical production technologies. This reviews discusses recent advance in understanding the effects of the characteristics of various processes on the production of biofuels using microalgae. The performances of microalgae based biofuel are compared.

• Korean Journal of Microbiology
• /
• v.29 no.6
• /
• pp.371-379
• /
• 1991

Effects of freshwater red tide of Peridinium bipes (dinoflagellate) in August of 1991 on the carbon flux through the microbial loop were studied in Soyang Reservoir. Chlorophyll a and primary production, bacterial production in red tide area were 22, 18 and 400 times higher, respectively, than other sites. Phytoplandton biomass comprised 97% and 20% of food source of zooplankton grazing within and without red tide, respectively. The percent bacterial production supported by phytoplankton exudate was 14% within red tide and >100% without red tide. In laboratory experiments, more than 85% organic carbon of Peridinium biomass was released or degraded by heterotrophic bacteria within 14 days. As results of red tide of Peridinium with sudden influx of organic carbon in water column, the main food source of zooplankton and dependency of bacteria on phytoplankton exudate were changed. Therefore, the relative importance of microbial loop to grazing food web was changed.

• Journal of Life Science
• /
• v.11 no.2
• /
• pp.116-119
• /
• 2001

Xinlei studies on the production of pullulan by Aureobasidium pullulans using batch culture in a 15L bioreactor were carried out. The mathematical models were obtained in this study, which provided a reasonable description for the biomass, the product, and the substrate variation with time. The values frets the mathematical models were satisfactorily coincided with the experimental data for the biomass of A. pullulans, the production of pullulan and the utilization of sucrose as the sole carbon source.

• Journal of Environmental Science International
• /
• v.8 no.1
• /
• pp.101-106
• /
• 1999

The relationship between primary productivity and changes in water quality was investigated at Mulgum station, a site downstream of the Nakdong River, Korea. Phytoplankton production was characterized by blooms of Microcystis aeruginosa during the summer and Stephanodiscus hantzschii during the winter. Primary production and secondary production by bacterioplankton ranged from 1.5~53.5 mg-C/ι day and 0.1~0.3 mg-C/ι day, respectively. Distribution of total organic carbon appeared to be highly correlated with phytoplankton biomass, especially during blooms of M. aeruginosa, when particulate organic carbon was 81% of total organic carbon and the main source of organic materials supplied into the water. The correlation coefficient between chlorophyll-a and BOD was 0.86. Thus it was concluded that autochthonous phytoplankton mostly affected the BOD level. Total bacterial numbers were also highly correlated with chlorophyll-a ($r^2$= 0.84) and the bacterial community appears to be regulated by phytoplankton biomass in this area.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.231-243
• /
• 2014

In this study, the potential of biomass, which is generated from oil palm cultivation and crude palm oil (CPO) production of Indonesia was assessed in the aspect of energy content. The types of oil palm biomass were classified on the basis of the cultivation stage and the CPO production stage. In the cultivation stage, biomass is considered to be produced from its' root, trunk and frond. Other possible biomass resources such as empty fruit bunch (EFB), palm kernel shell (PKS) and fiber were included in the CPO production stage. As results, total biomass from damaged plantation area of Indonesia was estimated to be annually from 3 million to 16 million tons in 2011. From CPO mills, approximately 49 million tons/yr of biomass residues were estimated to be annually occurred. Their total energy content from each biomass source in cultivation stage was analyzed to be from 593,000 to 3,197,000 TOEs in terms of gross calorific value. In the case of CPO mills, around 22.7 million TOEs was estimated to be potential energy producible by biomass based on gross calorific value of dry basis. If moisture content considered, net calorific value was analyzed to be decreased to 16.3 million TOEs. Based on the results, the total energy contents of all oil palm biomass were estimated to be up to 25,919,000 TOE in terms of gross calorific value. CPO : Crude Palm Oil, EFB : Empty Fruit Bunch, FFB: Fresh Fruit Bunch, PKS : Palm Kernel Shell, OPF : Oil Palm Frond, PKOC : Palm Kernel Oil Cake, ISPO : Indonesia Sustainable Palm Oil Commission, TOE : Tone of Oil Equivalent.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.214-225
• /
• 2016

Gasification is one of the important contribution to resource recycling by conversion of biomass to a variety of energy sources such as alcohol, SNG etc., and to global warming prevention by reduction of green house gases such as $CO_2$. The aim of this study is to draw the optimal operation condition of dual fluidized-bed gasifier with biomass fuel, to verify SNG production efficiency and to establish the basis for the domestic commercialization of dual fluidized bed gasification. As a result, dual fluidized-bed gasifier has the optimal conditions at $826^{\circ}C$ with steam input 1,334 g/hr, air input 5.56 L/min. The carbon conversion is 81% and SNG production efficiency was $CH_4$ 92%.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.11
• /
• pp.1592-1598
• /
• 2008

An experiment was carried out to study the effect of cattle slurry on maize fodder (Zea mays) production. Maize fodder was produced at 4 cattle slurry levels $T_0$ (0 ton/ha), $T_1$ (10 ton/ha), $T_2$ (12 ton/ha) and $T_3$ (14 ton/ha) in a randomized block design. Agronomic characteristics, plant heights, circumference of stems, number of leaves, leaf area and dry matter yield of maize fodder were measured. Maize plant height and stem circumference were significantly (p<0.01) influenced by the increasing rate of cattle slurry at 15, 30, 45 and 56 days after sowing. Number of leaves of fodder plants was not significant but leaf area was significant (p<0.05) among the treatment groups. The highest biomass yield (p<0.01) of maize fodder was observed in $T_2$ (44.0 ton/ha). For crude protein content, a significant difference (p<0.01) was observed in the treatment groups and the highest value was observed in $T_2$ (11.99%). Organic matter content of maize fodder showed a significant difference but ash, ADF and NDF contents showed no significant differences among treatment groups. From this study it may be concluded that the application of 12 tons of cattle slurry/ha was optimal for production of biomass and nutrient content of maize fodder.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.2
• /
• pp.199-206
• /
• 2012

Naturally immobilized tannase (tannin acyl hydrolase, E.C. 3.1.1.20) has many advantages, as it avoids the expensive and laborious operation of isolation, purification, and immobilization, plus it is highly stable in adverse pH and temperature. However, in the case of cell-associated enzymes, since the enzyme is associated with the biomass, separation of the pure biomass is necessary. However, tannic acid, a known inducer of tannase, forms insoluble complexes with media proteins, making it difficult to separate pure biomass. Therefore, this study optimizes the production of cell-associated tannase using a "protein-tannin complex" free media. An exploratory study was first conducted in shake-flasks to select the inducer, carbon source, and nitrogen sources. As a result it was found that gallic acid induces tannase synthesis, a tryptose broth gives higher biomass, and lactose supplementation is beneficial. The medium was then optimized using response surface methodology based on the full factorial central composite design in a 3 l bioreactor. A $2^3$ factorial design augmented by 7 axial points (${\alpha}$ = 1.682) and 2 replicates at the center point was implemented in 17 experiments. A mathematical model was also developed to show the effect of each medium component and their interactions on the production of cell-associated tannase. The validity of the proposed model was verified, and the optimized medium was shown to produce maximum cell-associated tannase activity of 9.65 U/l, which is 93.8% higher than the activity in the basal medium, after 12 h at pH 5.0, $30^{\circ}C$. The optimum medium consists of 38 g/l lactose, 50 g/l tryptose, and 2.8 g/l gallic acid.