• 생물환경조절학회지
• /
• 제16권3호
• /
• pp.217-221
• /
• 2007

다양한 활엽수 자원의 개발에 필요한 기초자료를 제공하고자 쪽동백나무 유묘의 생육밀도에 따른 물질생산량과 생장특성 등 최적의 생장조건을 조사하였다. 묘목의 생육밀도는 수고생장에 크게 영향을 미치는 중요한 요인이 될 수 있으며, 본 실험 결과 쪽동백나무의 $1m^2$당 생육 밀도에 따른 묘목의 생장은 49본구에서 간장과 근원직경이 우수한 생장량을 보인반면 생육밀도가 낮은 처리구는 근원직경 생장이 증가하면서 간장생장은 떨어지는 경향을 보였다. 물질생산량 또한 생장 특성과 마찬가지로 $1m^2$당 49본구 처리구에서 전체 물질생산량이 통계적으로 유의적인 차이를 보이면서 $3.12{\pm}0.80g$로 다른 처리구보다 높은 물질생산량을 보였고, T/R율에서도 1.59로 나타났다. 생리적 특성으로 광합성률 또한 쪽동백나무의 경우 $1m^2$당 $49/m^2$ 본구와 $64/m^2$ 본구에서 상대적으로 높은 광합성률을 보였고 밀도가 높아질수록 광합성 효율이 떨어지는 결과를 나타냈다. 이는 생육 환경조건에서 적절한 공간 확보가 궁극적으로 최종 물질대사 작용인 광합성률 변화에서 최적의 상태를 보이면서 생리적으로 안정된 생장형태를 보이는 것으로 판단되며, 적정 공간의 장애가 실질적인 생장저하를 발생시키고, 궁극적으로 물질대사의 최고 단계인 광합성효율 또한 낮아지는 경향을 나타냈다.

• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.45-50
• /
• 1997

This research was studied for dissolving pulp preparation as the raw material of viscose rayon from woody biomass by solvolysis pretreatment. In the change of pulp characteristic after solvolysis pretreatment, the following results were obtained. In the case of solvolysis pretreatment, we have obtained pulp that high purity cellulose, and degree of polymerization was inclined to decrease less than 440 on the phosphoric acid as catalyst. Comparing phosphoric acid and formic acid as catalyst in the solvolysis pretreatment, using on formic acid catalyst is superior to phosphoric acid catalyst for making dissolving pulp.

• 한국수소및신에너지학회논문집
• /
• 제30권2호
• /
• pp.178-187
• /
• 2019

Due to the increasing demand of high rank coal, the use of low rank coal, which has economically advantage, is rising in various industries using carbonaceous solid fuels. In addition, the severe disaster of global warming caused by greenhouse gas emissions is becoming more serious. The Republic of Korea set a goal to reduce greenhouse gas emissions by supporting the use of biomass from the Paris International Climate Change Conference and the 8th Basic Plan for Electricity Supply and Demand. In line with these worldwide trends, this paper focuses on investigating the combustibility of high rank coal Carboone, low rank coal Adaro from Indonesia, Baganuur from Mongolia and, In biomass, wood pellet and herbaceous type Kenaf were simulated as kinetic reactivity model. The accuracy of the pore development model were compared with experimental result and analyzed using carbon conversion and tau with grain model, random pore model, and flexibility-enhanced random pore model. In row lank coal and biomass, FERPM is well-matched kinetic model than GM and RPM to using numerical simulations.

• Asian Journal of Atmospheric Environment
• /
• 제7권1호
• /
• pp.25-37
• /
• 2013

Open biomass burning (excluding biofuels) is an important contributor to air pollution in the Asian region. Estimation of emissions from fires, however, has been problematic, primarily because of uncertainty in the size and location of sources and in their temporal and spatial variability. Hence, more comprehensive tools to estimate wildfire emissions and that can characterize their temporal and spatial variability are needed. Furthermore, an emission processing system that can generate speciated, gridded, and temporally allocated emissions is needed to support air-quality modeling studies over Asia. For these reasons, a biomass-burning emissions modeling system based on satellite imagery was developed to better account for the spatial and temporal distributions of emissions. The BlueSky Framework, which was developed by the USDA Forest Service and US EPA, was used to develop the Asian biomass-burning emissions modeling system. The sub-models used for this study were the Fuel Characteristic Classification System (FCCS), CONSUME, and the Emissions Production Model (EPM). Our domain covers not only Asia but also Siberia and part of central Asia to assess the large boreal fires in the region. The MODIS fire products and vegetation map were used in this study. Using the developed modeling system, biomass-burning emissions were estimated during April and July 2008, and the results were compared with previous studies. Our results show good to fair agreement with those of GFEDv3 for most regions, ranging from 9.7 % in East Asia to 52% in Siberia. The SMOKE modeling system was combined with this system to generate three-dimensional model-ready emissions employing the fire-plume rise algorithm. This study suggests a practicable and maintainable methodology for supporting Asian air-quality modeling studies and to help understand the impact of air-pollutant emissions on Asian air quality.

• 한국수소및신에너지학회논문집
• /
• 제23권3호
• /
• pp.274-284
• /
• 2012

Recently, gasification technology for coal blended with biomass has been an issue. Especially, An advantages of coal blended with biomass are 1) obtaining high cold gas efficiency, 2) obtaining syn-gas of high-high heating value (HHV), and 3) controlling occurrence of $CO_2$. In this study, the efficiency and characteristic of 300 MW Shell type gasifier were predicted using CFD simulation. The CFD simulation was performed for biomass coal blending ratios of 0~0.2, 0.5, 1 and $O_2$/fuel ratios of 0.5~0.84. Kinetic parameters (A, $E_a$) obtained by $CO_2$ gasification experiment were used as inputs for the simulation. In results of CFD simulation, residence times of particle in 300MW Shell type gasifer presented as 7.39 sec ~ 13.65 sec. Temperature of exit increased with $O_2$/fuel ratio as 1400 K ~ 2800 K, while there is not an effects of biomass coal blending ratios. Considering both aspects of temperature for causing wall slagging and high cold gas efficiency, the optimal $O_2$/fuel ratio and blending ratio were found to be 0.585 and 0.05, respectively.

• 한국물환경학회지
• /
• 제27권1호
• /
• pp.44-53
• /
• 2011

Membrane bio-reactor (MBR) has several advantages over the conventional activated sludge process, including a high biomass, low sludge production, and better permeate quality. Therefore, the MBR have gained popularity for municipal and industrial wastewater treatment. However the MBR usually were used for sewage and low streng th wastewater treatment because of membrane fouling problem and limitation of oxygen transfer into biomass. In this study, the hybrid process combining MBR and pure oxygen was tested for high strength organic wastewater treatment in the COD loading range from 2 to $10kgCOD/m^3{\cdot}day$. The hybrid process, membrane coupled pure oxygen high compact reactor (MPHCR), had been operated for one year and operation parameters, the effect of COD loading, MLSS concentration and the location of membrane module were studied for membrane fouling characteristic. Also membrane resistance test and the component of foulant was analyzed to investigate what is specific foulant in the MBR.

• Journal of Microbiology and Biotechnology
• /
• 제28권11호
• /
• pp.1865-1875
• /
• 2018

Enhanced application of solid-state fermentation (SSF) in industrial production and the influence of SSF of Rhizopus K1 on glucoamylase productivity were analyzed using the flat band method. A growth model was implemented through SSF of Rhizopus K1 in this experiment, and spectrophotometric method was used to determine glucoamylase activity. Results showed that in bran and potato culture medium with 70% moisture in a loose state, ${\mu}$ of mycelium reached to $0.15h^{-1}$ after 45 h of culture in a thermostatic water bath incubator at $30^{\circ}C$. Under a low-magnification microscope, mycelial cells appeared uniform, bulky with numerous branches, and were not easily ruptured. The generated glucoamylase activity reached to 55 U/g (dry basis). This study has good utilization value for glucoamylase production by Rhizopus in SSF.

• 한국약용작물학회지
• /
• 제17권5호
• /
• pp.328-334
• /
• 2009

Experimental purpose was to evaluate growth characteristic and abscisic acid (ABA) responses against salt/drought stresses. In the shoot biomass, creeping thyme was tolerated in mild NaCl stress, ranging 0 to 100 mM, while it was severely reduced in higher salinity. Under constant drought stress, the shoot biomass of creeping thyme showed a worse value compared to that of 100 mM NaCl treatment. Chlorophyll degradation was more severe in immature leaf than mature leaf under salt and drought stresses. In salt stress, immature leaf produced much amounts of ABA compared to mature leaf and also immature leaf showed faster increase of ABA than that of mature leaf. In drought stress, immature leaf responded to stress within 24 hours by the increase of ABA, while mature leaf responded to at 72 hours. Our results recommended that the optimal salinity level of creeping thyme was 50~100 mM NaCl.

• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.181-195
• /
• 2020

본 연구는 평로탄화로 이용한 성형목탄 제조과정에서 얻은 탄화된 바이오매스의 특성을 분석하였으며, 기계적 전처리 및 평로탄화로 내 위치에 따른 특성 차이를 비교하고자 하였다. 성형목탄 제조업체에서 채취된 바이오매스 1종과 탄화 바이오매스 5종의 시료를 대상으로 선별(screening) 및 분쇄(grinding)를 통해 분석시료의 입자크기 범위별로 분류한 후, 고정탄소, 회분, 휘발성 화합물, 원소 함량, 발열량을 측정하였다. 실험 결과, 평로탄화로의 위치에 따라서는 중간층의 탄화 바이오매스 발열량이 20.4 MJ/kg으로 가장 높은 연료적 특성을 나타내었다. 선별 입자 크기에 따라서는 100 mesh 이하의 탄화 바이오매스에서 회분함량이 가장 낮았고 발열량, 탄소 함량, 고정탄소 함량은 높았다. 상관관계 분석 결과 회분 함량은 발열량, 휘발성화합물, 고정탄소, 탄소 함량과 모두 음의 상관관계를 나타내어 회분 함량이 연료적 특성에 부정적인 영향을 미치는 것을 확인하였다.

• 한국환경과학회지
• /
• 제5권3호
• /
• pp.347-359
• /
• 1996

A study was carried out on the distribution of chlorophyll a and water quality in the dry season in Yosuhae bay and adjoining sea, Southern Korea, in July of 1994. Concentration of salinity and phosphate were lower in the outer bay than in the inner bay. While nitrate and silicate were higher in the former than in the latter. We were identified with coastal waters of origin from China with the lower salinity in outer bay. The China coastal water was characteristic of high nutrients and phytoplankton biomass, such as chlorophyll a. The principal component analysis-(PCA) on the analytical data proved that high density of phytoplankton biomass , occurred under the condition of low salinity and high concentration of nissoived Inorganic nutrients. It is thought that the thermoharine structure and biological produtions of Yosuhae bay were controlled by the China coastal water in the outer bay.