• Journal of agriculture & life science
• /
• v.44 no.3
• /
• pp.15-21
• /
• 2010

We estimated the biomass productivity and the storage potential of nitrogen, the major contributor of non-point source pollution, with four three-year-old four poplar clones in a riparian woody buffer established in the Anseong River in Anseong, Korea. Stem of Populus alba ${\times}$ P. glandulosa clone 72-31 and Populus deltoides ${\times}$ P. nigra clone Dorskamp showed the highest percentage of aboveground biomass components, followed by branch and leaf. Nitrogen content in aboveground biomass components of two poplar clones was the highest in leaf and the lowest in stem. Nitrogen content in leaf and branch of clone 72-31 was higher than that of clone Dorskamp, while it in stem was lower. Populus deltoides clone Ay48 showed the highest above-ground biomass productivity, which was estimated as $37.5ton\;ha^{-1}$ at age 3. However, clone 72-31 was the lowest in above-ground biomass productivity. Nitrogen storage potential in aboveground biomass of 3-year-old poplar clones was high in order of aboveground biomass. Clone Ay48 showed the highest nitrogen storage potential in aboveground biomass, which was estimated as $218.3kg\;ha^{-1}$ at age 3.

• Journal of Ecology and Environment
• /
• v.37 no.4
• /
• pp.165-175
• /
• 2014

A natural population of Adonis multiflora, a spring ephemeral herb growing in temperate deciduous forests, was studied to determine the seed production characteristics. Plant size, flowering time, and seed number were monitored from February 2009 to May 2011 in main growing season (i.e., from March through May). The biomass rates of the shoot and the root in the A. multiflora population were 22-24% and 76-78%, respectively, and the biomass of the root was proportional to that of the shoot. The flowering rate was 60% in the plants with 1 to 2 g of shoot biomass, and 100% in the plants with >2 g of shoot biomass. In the plants with root biomass between 4 and 6 g, the flowering rate was 43% and, in the plants with the root biomass over 8 g, it was 100%. The shoot biomass was a better predictor of the flower production probability than the root biomass. The number of flowers and seeds was closely correlated to shoot biomass at 1% significance level. The size of the plant that produced seed excessively instead of the shoot biomass in one year typically decreased in the next year and vice versa. The flowering time and its duration were closely related to the number of faithful seeds but not to that of total seeds. The number of faithful seeds was proportionate to flowering duration and inversely proportionate to flowering time (year day, YD). In a plant, the number of faithful seeds noticeably decreased with the inflorescence (i.e., order of flower in a plant), and this difference between the two successive flowers was significant at the 1% level between the first and the third flower in 2009 and 2011 but not between the third and the fourth. However, the number of total seeds was mostly similar in the first through the fourth flower for all three years.

• KSBB Journal
• /
• v.7 no.4
• /
• pp.247-251
• /
• 1992

The effect of biomass concentration of Saccharomyces cerevisiae ATCC 24858 on specific growth rates, biomass yields, ethanol yields and productivity in the batch fermentation of rotary shaker was investigated. The specific growth rate decreased according to the increase in the biomass density and finally became zero at a biomass concentration, 55g/L. The ethanol yield $Y_{p/s}$ represented a constant value, 0.43, regardless of the change of biomass concentrations. However, the biomass yield $Y_{x/s}$ showed a trend to diminish in values with augmentation of biomass density and ultimately to reach zero at 55g/L of biomass concentration. The ethanol productivity increased linearly with biomass concentration so that, in case of initial sugar concentration, 170g/L, the productivity for 55g/L of biomass density rose up to 30g/L$\cdot$hr for all the batch fermentations. And also the ethanol concentration inhibiting completely the growth was verified 95g/L by applying experimental data to Luong's equation.

• Journal of Korea Foresty Energy
• /
• v.18 no.1
• /
• pp.6-10
• /
• 1999

This study was conducted to examine biomass production and its allocation characteristics by the planting density for 12- year - old Pinus densiflora forma erecta Uyeki plantation located in Chilbo Experimental Forest of Seoul National University in Suwon, Kyonggj-do. Different sample trees were selected for harvest by the planting density as follows; six trees from 1.0m X 1.0m, five trees from 1.8m X 1.8m, four trees from 3.0m X 3.0m. Stem, previous year branches, current year branches, previous year needles and current year needles were weighed respectively with the stratified clipping method, and biomass production and its allocation characteristics were analyzed : (1) Total biomass of the above-ground was the highest at the planting density of 1.8m X l.8m and followed by 1.0m X l.0m. (2) The higher the planting density was, the lower the ratio of biomass in branches and needles. (3) As the planting density decreased, the moisture contents of stem and current year branches increased but those of needles and previous year branches decreased. (4) Maximum photosynthetic layer appeared in the upper portion of the tree at higher density plantation.

• New & Renewable Energy
• /
• v.18 no.4
• /
• pp.70-78
• /
• 2022

To respond to global warming, there is an increasing interest in eco-friendly alternative energy sources. Therefore, unused forest biomass that has been neglected due to a lack of marketability is attracting attention. With the introduction of the "unused forest biomass certification system" in 2019, ways of determining quantity of unused forest biomass have steadily increased. However, there have been reported cases whereby unused forest biomass weighed more than the amount of harvested trees. It was found that it was possible that forest resources that can be used as round wood were mixed with unused forest biomass. In this context, this study aimed to estimate the amount of mixed round wood in the unused forest biomass supply. The relative expression of growing stock/ha versus the amount of final clearing/ha collected was modeled (y=1.490x-94.341, R²=0.861). As a result, it was found that round wood was mixed into the unused forest biomass, contributing to the disparity observed between the weighted forest biomass and the amount of trees harvested. In conclusion, proper declaration and certification procedures should be carried out for the use of forest resources and promoting unused forest biomass usage.

• Carbon letters
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2016

Lignocellulosic biomass conversion to biofuels such as ethanol and other value-added bio-products including activated carbons has attracted much attention. The development of an efficient, cost-effective, and eco-friendly pretreatment process is a major challenge in lignocellulosic biomass to biofuel conversion. Although several modern pretreatment technologies have been introduced, few promising technologies have been reported. Microwave irradiation or microwave-assisted methods (physical and chemical) for pretreatment (disintegration) of biomass have been gaining popularity over the last few years owing to their high heating efficiency, lower energy requirements, and easy operation. Acid and alkali pretreatments assisted by microwave heating meanwhile have been widely used for different types of lignocellulosic biomass conversion. Additional advantages of microwave-based pretreatments include faster treatment time, selective processing, instantaneous control, and acceleration of the reaction rate. The present review provides insights into the current research and advantages of using microwave-assisted pretreatment technologies for the conversion of lignocellulosic biomass to fermentable sugars in the process of cellulosic ethanol production.

• Journal of Ecology and Environment
• /
• v.41 no.3
• /
• pp.93-98
• /
• 2017

Background: Although phytoremediation is a promising method for pollution control, biomass produced by the remediation process must be managed; otherwise, it will eventually return to the environment and cause secondary pollution. Therefore, research and policy development for the post-remediation management of biomass are both required. Results: While there are many published studies of phytoremediation, research into post-remediation management is very limited. Therefore, a new study using biomass as a co-composting material was conducted and showed positive effects on soil characteristics and plant performance. However, despite its potential, research and policies to promote this form of management are still lacking. Conclusions: We suggest public engagement in support of "Post-phytoremediation management" legislation that stipulates management of biomass after phytoremediation, promotes recycling of biomass with known environmental risks, and includes specific policies developed for managers. Further research to support and inform such policies and laws is also required.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.6
• /
• pp.514-521
• /
• 2004

Waste heat recovery system was studied numerically and experimentally. Heat exchanger system was designed specially to obtain the optimum heat exchanging performance. Brushwood biomass was used for the present experimental study. Two biomass heat recovery systems were designed and developed. Polyethylene helical pipe line of 0.03 m (inner diameter) was installed to recover the heat of biomass dump. The fermentation process of biomass dump was maintained for 12 weeks. The inner average temperature of biomass was about 51$^{\circ}C$ for both hot exchanger systems. The current heat recovery system could recover up to 6 ㎉/kg of energy.

• Korean Journal of Ecology and Environment
• /
• v.40 no.4
• /
• pp.511-519
• /
• 2007

It is known that phytoplankton biomass or turbidity are lower in waters with submerged macrophytes than those without submerged plants at a given nutrient level. We hypothesize that presence of submerged macrophytes would lower phytoplankton biomass below levels expected by total phosphorus levels through various mechanisms and that phytoplankton biomass would decrease more as the biomass increase of the submerged macrophytes. To find submerged macrophytes effectively lowering phytoplankton growth, we conducted spatial field surveys at 21 water bodies and a temporal monitoring at Seung-un 1 Reservoir, Anmyyeondo Island. We measured chlorophyll ${\alpha}$ concentrations and total phosphorus (TP) concentrations from waters in patches of submerged macrophytes with measurements of submerged plant biomass. Majority of our sites with submerged macrophytes showed much less chlorophyll a concentrations than the predicted ones from literature. Among submerged macrophytes studied, Myriophyllum spicatum and Hydrilla verticillata showed patterns of lowering chlorophyll ${\alpha}/TP$ ratios with increase of their biomass in both spatial and temporal surveys.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.1 no.2
• /
• pp.157-166
• /
• 1997

The biosorption performances of copper were investigated by the immobilized biomass of nonliving marine brown algae Undaria pinnatifida by each of the Ca-alginate method(Ca-ALG), Ba-alginate method(Ba-ALG), polyethylene glycol method(PEG), and carrageenan method (CARR). The copper removal performance increased but the copper uptake decreased as the biomass amount was increased. However, the copper uptake by the immobilized biomass increased with increasing initial copper concentration. Among the immobilization methods, the copper uptake decreased in the following sequence: Ca-ALG > Ba-ALG > PEG > CARR. The pattern of copper uptake by the immobilized biomass fitted the Langmuir isotherm better than the Freundlich isotherm. Desorption of deposited copper with 0.05 ~0.5M HCI, resulted in no changes of the copper uptake capacity of the immobilized biomass by the immobilization methods except for PEG, through five subsequent biosorption/desorption cycles. There was no damage to the immobilized biomass which retained its macroscopic appearance in repeated copper uptake/elution cycles.