• Environmental Analysis Health and Toxicology
• /
• v.15 no.4
• /
• pp.115-122
• /
• 2000

Biocides, or non-agricultural pesticides, are a broad class of chemical. They are including biological agents used to disinfect/sanitize, pesticides for non-agricultural use, wood preservatives, antifoulants, etc. Since the early 1980s, many adverse effects of biocides to human health and ecosystem have been found in the world. Especially, antifouling biocide like TBT caused serious toxic effects on the marine organisms. Therefore, OECD began to work on biocides in mid 1996 to help Member countries co-operate in the assessment and registration of these products. EU also announced the Biocidal Products Directive (BPD, 98/8/EC) in 1998 to harmonize regulatory approaches to allow EU countries to conduct evaluations of biocides more efficiently. Korea just start to consider of biocides regulation. Some biocides products are regulated, but not all the biocides which are using in Korea. Therefore, we need to make a appropriate regulation for the all biocides categories. In addition, there are necessary to develop risk assessment tools, to survey the use pattern and amount, to research on the ecosystem contamination by the biocides .

• Journal of Conservation Science
• /
• v.21
• /
• pp.73-88
• /
• 2007

In this paper, the interaction between five biocides(commercial) and two ethylsilicate consolidants for stone monuments, reacted in different sequence, has been studied. Through the structures, weight and gelation time of mixture of biocides and consolidants have been evaluated the reactivity of biocide alone, the reactivity of consolidants and biocides, the reactivity of consolidants and dried biocide, and the reactivity of ethylsilicate gel and biocides. The tested biocides show quite different properties from those of consolidants; after evaporation, some biocides are remained white salt crystals, another need the long time for evaporation and one biocide shows pale brown color. The results have shown an interaction of the tested products each other in some application sequences of the products. When the application of liquid state biocides with consolidants, it was noted that some biocide seem to interfere with the formation of gel due to reaction of consolidants and water and salts in biocides. In the reaction of ethylsilicate with dried biocides have shown a heterogenous gel(transparent layer with ethylsilicate alone and white layer which is mixed biocide and ethylsilicate) and many cracks in product due to the different shrinkage, thus the products don't play a role as consolidants. There is no change in structures and color in reaction of the gas state biocide and ethylsilicate gel.

• Journal of Plant Biology
• /
• v.25 no.3
• /
• pp.113-121
• /
• 1982

The effects of 6 biocides on the growth of Chlamydomonas reinhardii in pure culture were studied. For the batch culture assay of biocides, the growth rate in control tubes should be compared with in the test tubes and the effective concentration calculated on the basis of the percent decrease in growth rate at the different toxicant concentration. The concentrations at which 50% decrease in growth rate was observed are $40{\mu}g$/l for butachlor and $350{\mu}g$/l for alachlor in herbicide, $900{\mu}g$/l for phenazine-5-oxide and $3,400{\mu}g$/l for isoprothiolane in fungicide, and $3,330{\mu}g$/l for fenthion and $332,500{\mu}g$/l for trichlorfon in insecticide. The inhibitory effect on the growth of Chlamydomonas reinhardii by the treatment of various biocide concentrations was decreased in order of herbicide>fungicide>insecticide. Chlorophyll and carotenoid content per cell were increased, whereas chlorophyll a/b ratio was hardly affected by biocides. The effects of biocides on pigment content were also decreased in order of herbicide>fungicide>insecticide, which suggested the relationship between the effect of biocides on the pigment content and inhibition of growth rate.

• The Korean Journal of Ecology
• /
• v.17 no.4
• /
• pp.425-434
• /
• 1994

After two highly weathered soils were treated with glucose, ammonium nitrate, monobasic potassium phosphate and biocides, and incubated for 4 or 6 weeks, adsorption tests were carried out to determine their effect on P adsorption. Glucose addition generally decreased P adsorption. The addition stimulated microbial activity, which might contribure to the reduced adsorption, probably through chelation and anion competition. Consistent endency was not observed with N treatment. Addition of P initially decreased P adsorption, probably through blockage of adsorption sites. Biocides generally decreased adsorption, probably because the microbes that 몬 been killed. Soil 1 with naturally lower levels of C and higher levels of aluminium adsorbed more P than soil 2. These results suggest that in highly weathered soils, which are low in available P and high in exchangeable Al, cultivation techniques which increase soil organic matter will also result in higher levels of plant-available P.

• Analytical Science and Technology
• /
• v.28 no.5
• /
• pp.317-322
• /
• 2015

Simultaneous analytical method has developed for the determination of anion biocides in soil by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Chlorite and chlorate in soil were extracted with pure water, and cyanuric acid and sodium dodecylbenzenesulfonate (Na-DBS) were extracted with mobile phase (0.25 mM ammonium formate in 20 mM formic acid : acetonitrile (1:1)). The extract was injected into the LC-MS/MS system after filtration. The method detection limits in this study were 0.04 mg/kg for chlorite, 0.04 mg/kg for chlorate, 0.27 mg/kg for cyanuric acid, and 0.05 mg/kg for Na-DBS, respectively. The method was applied to the analysis of 50 soil samples collected from 40 sites sprayed with biocides and 10 background sites. As a result, anion biocides were not detected in all sites.

• Journal of Electrochemical Science and Technology
• /
• v.9 no.1
• /
• pp.44-50
• /
• 2018

The aims of this study were to determine the corrosion behavior of pure copper in the presence of Desulfovibrio sp. and also to investigate the effects of glutaraldehyde (GD) and isothiazolinone (ISO) on the corrosion behavior of pure copper in the presence of this sulfate-reducing bacteria (SRB) strain by using electrochemical techniques. Electrochemical measurements of pure copper were carried out at specified time intervals (0, 8, 24, 48, and 96 hr) over a period of exposure. Corrosion rates of pure copper from anodic and cathodic Tafel slopes and corrosion potential ($E_{corr}$) were determined. Biofilm and corrosion products on the copper surfaces were observed by Field Emission Scanning Electron Microscopy (FESEM) and Energy Dispersive X-Ray Spectrometry (EDS) analyses. The effects of solution types (PC (Postgate's C medium) and SRB (Desulfovibrio sp.)) and exposure times of copper and biocides (ISO or GD) on the corrosion rates of pure copper were evaluated by statistical analyses. As a result of the FESEM analysis, biofilm formation was observed on the surfaces of pure copper exposed to the Desulfovibrio sp. cultures both with and without the biocides. The results show that the pure copper was corroded by Desulfovibrio sp. However, the addition of GD or ISO to the Desulfovibrio sp. culture resulted in a decrease in the corrosion rate of the pure copper. It was also observed that both of the biocides showed a similar effect on pure copper's corrosion rate caused by Desulfovibrio sp.

• Analytical Science and Technology
• /
• v.35 no.5
• /
• pp.197-204
• /
• 2022

A gas chromatography-mass spectrometric method was developed for determining 5-chloro-2-methyl-4-isothiazolin-3-one (CMIT), 2-methyl-4-isothiazolin-3-one (MIT), 1,2-benzisothiazolin-3-one (BIT), 3-iodo-2-propynyl butyl carbamic acid (IPBC) and benzoic acid (BA) in household products. A 0.5 g sample was placed in a test tube and dissolved with 5 mL water, 5 mL methylene chloride and 1.0 mL methanol. The solution was extracted by ultra-sonication followed by mechanical shaking using the salting out effect. Under the established condition, the lowest quantification limits of all analytes were in the range of 0.04-10 mg/kg and their relative standard deviations were less than 8.0 %. The method was used to analyze 10 household products. As a result of analyzing 10 household products, MIT was detected in the range of 1.2-3.5 mg/kg in 3 of 10 samples, CMIT was detected in the range of 2.6-8.2 mg/kg in 3 of 10 samples, and BA was detected in the range of 5.0-15 mg/kg in 4 of 10 samples. Meanwhile, BIT and IPBC were not detected in any of the products. It has been shown that this method can be used for the simultaneous determination of biocides with various physical and chemical properties in household products.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.67-71
• /
• 2006

Strong oxidizing biocides are commonly used to control biofilm formation in alkaline papermaking systems. However, paper streams contain many substances that react with or consume oxidizers (e.g., fiber and starch, Therefore, to achieve effective microbiological control, the oxidizer must be overfed to overcome the effect of these substances. When dosed in this manner, the oxidizer can cause many unwanted reactions and adverse side effects, including the consumption of costly papermaking additives increased corrosion rates, and reduced felt life. Some oxidizers also contribute to the formation of halogenated organic compounds. When used for biofilm control, strong oxidizers can cause more problems than they remedy. A patented biocide that effectively controls biofilm without the adverse side effects associated with strong oxidizing biocides is available from Hercules. $Spectrum^{(R)}$ XD3899 Ammonium Bromide Technology, which can be described as a mild oxidizer, is currently used on more than 300 machines globally and has resulted in numerous production and/or machine efficiency records since its introduction in 2001.

• Mass Spectrometry Letters
• /
• v.14 no.4
• /
• pp.166-172
• /
• 2023

The utilization of methyl 2-aminobenzoate as a biocide and pesticide has raised concerns regarding its potential toxicity. To assess its safety, it is crucial to determine its quantity and related toxicity using reference materials (RMs) or certified reference materials (CRMs). As an RM and CRM containing methyl 2-aminobenzoate within a biocidal product matrix is currently unavailable, this study aimed to produce a high-quality RM containing methyl 2-aminobenzoate, ensuring its homogeneity and stability, following the ISO Guide 35 and ISO 17034. The study determined that the produced RM exhibited homogeneity, as indicated by a calculated F-value (1.91) smaller than the critical F-value (3.02). In the assessment of isochronous short-term stability, the slope of the linear regression for the RM showed no statistically significant difference from zero when stored at temperatures of 4, 18, and 60 ℃ for 4 weeks. Regarding classical long-term stability, the RM demonstrated sustained stability over the course of one year when stored at 4 ℃. This study has successfully developed an RM for monitoring methyl 2-aminobenzoate in biocides and pesticides. Its quality underwent rigorous evaluation, confirming both homogeneity and stability.

• Journal of Environmental Health Sciences
• /
• v.38 no.2
• /
• pp.166-174
• /
• 2012

Introduction: After 17 years since the first production of humidifier disinfectants in Korea, Korea Centers for Disease Control and Prevention (KCDC) announced that the odds ratio of lung injury related with humidifier disinfectant usage was 47.3 (95% confidence interval 6.0-369.7) according to a case-control study with 18 adult cases, including 8 pregnant women at a university hospital in Seoul. Results: From September 2011 to April 2012, one-hundred and seventy four victim cases have been reported to an environmental non-governmental group (NGO). We summarized timetable of humidifier disinfectants accidents, analyzed health outcomes (death, lung or lung and heart transplantation, pulmonary disease) of reported victims, and classified some information for humidifier disinfectants with health outcomes, and government action for this accident. Among the victims, number of death cases are 52 (30.0%), including 26 babies less than 3 years old. Sixty-nine victims come from twenty-seven family with 2 to 4 members per family. About twenty types of humidifier disinfectant products and about 600,000 product items a year have been sold. Fifty-two death cases used 7 different types of disinfectant products, including imported goods and some private brands of well-known supermarkets. KCDC confirmed inhalation toxicity of 6 products through an animal experimental test, and based on this observation recalled disinfectants containing PHMG (polyhexamethylene guanidine) and PGH (Oligo(2-(2-ethoxy)ethoxyethyl guanidinium chloride). Discussions: The use of these biocides involved highly fatal consequences among biologically vulnerable victims, such as pregnant women, several family member victims after semi-acute exposure. This is the first biocide disaster in Korea with non-specific targets, and unknown scale of victims, warranting concerns on use of biocides in the living environment. Conclusions: Special administrative agency for chemical safety and compensation act for environmental health victims are needed to prevent similar problems.