• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.251-252
• /
• 2012

Recently, the growing interest in organic microelectronic devices including OLEDs has led to an increasing amount of research into their many potential applications in the area of flexible electronic devices based on plastic substrates. However, these organic devices require a gas barrier coating to prevent the permeation of water and oxygen because organic materials are highly susceptible to water and oxygen. In particular, high efficiency OLEDs require an extremely low Water Vapor Transition Rate (WVTR) of $1{\times}10^{-6}g/m^2$/day. The Key factor in high quality inorganic gas barrier formation for achieving the very low WVTR required ($1{\times}10^{-6}g/m^2$/day) is the suppression of defect sites and gas diffusion pathways between grain boundaries. In this study, we developed an $Al_2O_3$ nano-crystal structure single gas barrier layer using a Neutral Beam Assisted Sputtering (NBAS) process. The NBAS system is based on the conventional RF magnetron sputtering and neutral beam source. The neutral beam source consists of an electron cyclotron Resonance (ECR) plasma source and metal reflector. The Ar+ ions in the ECR plasma are accelerated in the plasma sheath between the plasma and reflector, which are then neutralized by Auger neutralization. The neutral beam energies were possible to estimate indirectly through previous experiments and binary collision model. The accelerating potential is the sum of the plasma potential and reflector bias. In previous experiments, while adjusting the reflector bias, changes in the plasma density and the plasma potential were not observed. The neutral beam energy is controlled by the metal reflector bias. The NBAS process can continuously change crystalline structures from an amorphous phase to nano-crystal phase of various grain sizes within a single inorganic thin film. These NBAS process effects can lead to the formation of a nano-crystal structure barrier layer which effectively limits gas diffusion through the pathways between grain boundaries. Our results verify the nano-crystal structure of the NBAS processed $Al_2O_3$ single gas barrier layer through dielectric constant measurement, break down field measurement, and TEM analysis. Finally, the WVTR of $Al_2O_3$ nano-crystal structure single gas barrier layer was measured to be under $5{\times}10^{-6}g/m^2$/day therefore we can confirm that NBAS processed $Al_2O_3$ nano-crystal structure single gas barrier layer is suitable for OLED application.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4081-4086
• /
• 2014

Cellulose acetate butyrate (CAB) is a biodegradable resin with excellent optical properties, but it is difficult to apply film process. In this study, an attempt was made to improve the processability of CAB using polyactic acid and the mechanical properties using an impact modifier. Polylacitc acid (PLA)/Cellulose acetate butyrate (CAB) blends with an impact modifier were prepared using a twin screw extruder. The temperature range was $140^{\circ}C$ to $200^{\circ}C$, and the screw speed was fixed to 200 rpm. To evaluate the miscibility of impact modified CAB/PLA, the glass transition behavior and morphology were observed by DSC and FE-SEM. The mechanical properties were investigated by dynamic mechanical analysis (DMA) and a Universal Testing Machine (UTM). In addition, the effect of an impact modifier in the polymer matrix was determined using a notched Izod impact strength tester. Finally, the PLA/CAB/impact modifier 75/25/10 ratio was found to be a compatible system. In the 10wt.% impact modifier, the sample had a 4 times higher izod impact strength than the non-toughening composition.

• Journal of dental hygiene science
• /
• v.11 no.3
• /
• pp.181-187
• /
• 2011

This study conducted oral examinations and individual interviews on migrant multi-cultural family women in Daegu and measured their socio-demographic characters, oral health conditions and OHIP-14 in an aim to investigate the relevance between the oral health of migrant multi-cultural family women living in some big cities and their quality of life. Based on data finally collected from 189 women, the t-test, ANOVA and binary logistic regression analysis were conducted and the conclusions are as follows: The average number of decayed teeth was 2.23, loss teeth was 1.48, and treated teeth was 5.58. Women from the Philippines had more number of loss teeth than those from other countries, and women from China relatively had a small number of filled permanent teeth. The quality of life related to oral health was found to be poor in proportion to the number of loss teeth. A comparison of life quality related to oral health depending on loss teeth showed that life quality related to oral health was lowest in the areas of mental discomfort, physical ability decrease, mental ability decrease, social ability decrease and social disadvantage. Life quality related to oral health was found to be low in proportion to the number of permanent teeth with decay experience and poor monthly household income, which shows that the number of permanent teeth with decay experience and monthly income are mostly related to life quality related to oral health. As migrant multi-cultural family women's life quality related to oral health is low in proportion to the number of loss teeth and decayed teeth, it needs to develop a program to improve their oral healthrelated life quality and conduct follow-up research to verify its effect.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.3
• /
• pp.153-161
• /
• 2014

The purpose of this study is to evaluate effect of heavy metals (i.e., $Cu^{2+}$, $Zn^{2+}$, $Cr^{6+}$, $Cd^{2+}$, $Hg^{2+}$, and $Pb^{2+}$) to toxicity of Triclosan as binary mixture. The individual toxicity and combined toxic effects of Triclosan with heavy metals were evaluated by Vibrio fischeri assay. In individual toxicity, the $Hg^{2+}$ was found to be most toxic followed by Triclosan, $Pb^{2+}$, $Cr^{6+}$, $Cu^{2+}$, $Zn^{2+}$, and $Cd^{2+}$, respectively. To evaluate combined toxic effect, correlation analysis of 'predicted value' calculated by Concentration addition (CA) model and Independent action (IA) model with 'experimental value' were performed based on the toxicity of individual compound. As a result, all of the combinations showed that IA model were more correlated with experimental value than CA model. On the basis of the median effect concentration of combination ($EC_{50mix}$) predicted by IA model, experimental $EC_{50mix}$ of Triclosan + Cu, Triclosan + Zn, Triclosan + Pb, Triclosan + Hg, Triclosan + Cd, and Triclosan + Cr were 191%, 226%, 138%, 137%, 209%, and 138% of $EC_{50mix}$ predicted by IA model, respectively, indicating that all of the combinations produced antagonistic effect.

• Journal of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.185-192
• /
• 1976

Equivalent conductances of ammonium salts such as $NH_4Cl,\;CH_3NH_3Cl,\;(CH_3)_2NH_2Cl,\;(CH_3)_3NHCl\;and\;(CH_3)_4NCl$ have been measured in methanol-water mixtures of various composition (0.0${\sim}$0.6-mole frcation: m. f.) in the concentration range from 0.01 to 0.04 M at $25^{\circ}C$, and limiting equivalent conductances (${\Lambda}_0$) are determined by the analysis of Fuoss Onsager's semiempirical equation.The experimental results are discussed in terms of varing the size of ${\Lambda}_0$ due to the salts species and solvent composition. It has been observed in quite common over all salts that ${\Lambda}_0$ decreases with the increase of m. f. methanol, and the maximum decrement in ${\Lambda}_0$ shows between water and 0.1 m. f., while the plot of ${\Lambda}_0$ vs. m. f. goes through a minimum at 0.4 m. f. and then turns slightly upward. On the other hand, the ${\Lambda}_0$ decrease with the increase of the size of ammonium cation and the larger values ${\Lambda}_0$ are showed in comparison with those of values observed for the corresponding $n-RNH_3Cl$ under the same experimental procedure. All these behaviors are considered to be closely correlated with the structures of solvents and solutes and the significant similarities are compared with the behaviors of partial molar volumes for amine salts in same solvent system.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.508-517
• /
• 2020

Servitization presents an innovative model to create business value in the automotive industries. This study set out to introduce a servitization model based on the rental business of the tire industry and identify determinants to affect the renewal of contracts around the service types of servitization and the characteristics of customers. Independent variables include the service types, demographics and regions, and inflow channels in 163,742 contracts by case companies in the nation in 2016~2019 with the renewal of contracts as a dependent variable. Correlations between variables were analyzed through cross-tabulation and binary logistic regression analysis. The findings show that the contract renewal rate had positive(+) relations with customized service and negative(-) ones with vehicle maintenance service. There were differences in the contract renewal rate according to such customer characteristics as gender and region, but no clear correlations were found in the age group and vehicle type(domestic/foreign). Of the inflow channels, offline channels tended to have a higher renewal rate than online channels. At open malls, contract renewal increased by 8.4 times due to contract switches at offline channels. Based on these findings, the study discussed directions for practical strategies with regard to the development of new service, implementation of customer-centric servitization, and management of sales channels according to the servitization of manufacturers.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.1
• /
• pp.45-52
• /
• 2015

The interoperability of multi-source data has become more important due to various digital maps, produced from public institutions and enterprises. In this study, the automatic matching algorithm of multi-source building data using hierarchical matching was proposed. At first, we divide digital maps into blocks and perform the primary geometric registration of buildings with the ICP algorithm. Then, corresponding building pairs were determined by evaluating the similarity of overlap area, and the matching threshold value of similarity was automatically derived by the Otsu binary thresholding. After the first matching, we extracted error matching candidates buildings which are similar with threshold value to conduct the secondary ICP matching and to make a matching decision using turning angle function analysis. For the evaluation, the proposed method was applied to representative public digital maps, road name address map and digital topographic map 2.0. As a result, the F measures of matching and non-matching buildings increased by 2% and 17%, respectively. Therefore, the proposed method is efficient for the matching of building polygons from multi-source digital maps.

• Journal of Gastric Cancer
• /
• v.18 no.3
• /
• pp.264-273
• /
• 2018

Purpose: To investigate the current status of adjuvant chemotherapy (AC) regimens in Korea and the difference in efficacy of AC administered by surgical and medical oncologists in patients with stage II or III gastric cancers. Materials and Methods: We performed a retrospective observational study among 1,049 patients who underwent curative resection and received AC for stage II and III gastric cancers between February 2012 and December 2013 at 29 tertiary referral university hospitals in Korea. To minimize the influence of potential confounders on selection bias, propensity score matching (PSM) was used based on binary logistic regression analysis. The 3-year disease-free survival (DFS) rates were compared between patients who received AC administered by medical oncologists or surgical oncologists. Results: Between February 2012 and December 2013 in Korea, the most commonly prescribed AC by medical oncologists was tegafur/gimeracil/oteracil (S-1, 47.72%), followed by capecitabine with oxaliplatin (XELOX, 16.33%). After performing PSM, surgical oncologists (82.74%) completed AC as planned more often than medical oncologists (75.9%), with statistical significance (P=0.036). No difference in the 3-year DFS rates of stage II (P=0.567) or stage III (P=0.545) gastric cancer was found between the medical and surgical oncologist groups. Conclusions: S-1 monotherapy and XELOX are a main stay of AC, regardless of whether the prescribing physician is a medical or surgical oncologist. The better compliance with AC by surgical oncologists is a valid reason to advocate that surgical oncologists perform the treatment of AC for stage II or III gastric cancers.

• Journal of The Korean Astronomical Society
• /
• v.49 no.6
• /
• pp.295-306
• /
• 2016

We present the results of BV time-series photometry of the globular cluster NGC 288. Observations were carried out to search for variable stars using the Korea Microlensing Telescope Network (KMTNet) 1.6-m telescopes and a 4k pre-science CCD camera during a test observation from August to December, 2014. We found a new SX Phe star and confirmed twelve previously known variable stars in NGC 288. For the semi-regular variable star V1, we newly determined a period of 37.3 days from light curves spanning 137 days. The light-curve solution of the eclipsing binary V10 indicates that the system is probably a detached system. The pulsation properties of nine SX Phe stars were examined by applying multiple frequency analysis to their light curves. We derived a new Period-Luminosity (P-L) relation, ${\langle}M_V{\rangle}=-2.476({\pm}0.300){\log}P-0.354({\pm}0.385)$, from six SX Phe stars showing the fundamental mode. Additionally, the period ratios of three SX Phe stars that probably have a double-radial mode were investigated; $P_{FO}/P_F=0.779$ for V5, $P_{TO}/P_{FO}=0.685$ for V9, $P_{SO}/P_{FO}=0.811$ for V11. This paper is the first contribution in a series assessing the detections and properties of variable stars in six southern globular clusters with the KMTNet system.

• Journal of Animal Science and Technology
• /
• v.44 no.2
• /
• pp.151-164
• /
• 2002

Genetic variance and covariance components of the linear traits and the ordered categorical traits, that are usually observed as dichotomous or polychotomous outcomes, were simultaneously estimated in a multivariate threshold animal model with concepts of arbitrary underlying liability scales with Bayesian inference via Gibbs sampling algorithms. A multivariate threshold animal model in this study can be allowed in any combination of missing traits with assuming correlation among the traits considered. Gibbs sampling algorithms as a hierarchical Bayesian inference were used to get reliable point estimates to which marginal posterior means of parameters were assumed. Main point of this study is that the underlying values for the observations on the categorical traits sampled at previous round of iteration and the observations on the continuous traits can be considered to sample the underlying values for categorical data and continuous data with missing at current cycle (see appendix). This study also showed that the underlying variables for missing categorical data should be generated with taking into account for the correlated traits to satisfy the fully conditional posterior distributions of parameters although some of papers (Wang et al., 1997; VanTassell et al., 1998) presented that only the residual effects of missing traits were generated in same situation. In present study, Gibbs samplers for making the fully Bayesian inferences for unknown parameters of interests are played rolls with methodologies to enable the any combinations of the linear and categorical traits with missing observations. Moreover, two kinds of constraints to guarantee identifiability for the arbitrary underlying variables are shown with keeping the fully conditional posterior distributions of those parameters. Numerical example for a threshold animal model included the maternal and permanent environmental effects on a multiple ordered categorical trait as calving ease, a binary trait as non-return rate, and the other normally distributed trait, birth weight, is provided with simulation study.