• 한국통신학회논문지
• /
• 제34권5A호
• /
• pp.408-413
• /
• 2009

본 논문에서는 평균제곱오차(mean-square-error)를 최소화하며, 여러 사용자 양방향 통신(bidirectional communications)을 지원하는, 증폭-후-전달(amplify-and-forward) 중계기의 송수신 가중치 행렬을 제안한다. 또한, 시스템 전송량을 최대화하는 각 사용자 빔포밍(beamforming) 벡터를 설계한다. 모의실험을 통해 제안한 중계기 가중치로 여러 사용자간 상호채널간섭(co-channel interference)과 양방향 통신에서 발생하는 자기간섭(self-interference)을 효과적으로 줄일 수 있음을 보이고, 또한, 제안한 빔포밍 방식이 공간 다중화(spatial multiplexing) 방식에 비해 증폭-후-전달 중계기 양방향 통신에 적합함을 확인하였다.

• ETRI Journal
• /
• 제28권1호
• /
• pp.1-8
• /
• 2006

A novel all-optical gain-controlled (AOGC) bidirectional amplifier is proposed and demonstrated in a compact structure. The AOGC function using fiber Bragg grating (FBG) pairs controls both directional signals independently, and combinations of optical interleavers and isolators suppress Rayleigh backscattering (RB) noise. The amplifier achieves high and constant gain with a wide dynamic input signal range and low noise figure. The performance does not depend on the input signal conditions, whether static-state or transient signals, or whether there is symmetric or asymmetric data traffic on bidirectional transmission. Transmission comparison experiments between invariable symmetrical and random variable asymmetric bidirectional data traffic verify that the all-optical gain control and bidirectional amplification functions are successfully combined into this proposed amplifier.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.719-722
• /
• 2002

This paper reports the characteristics of a bidirectional antenna by using a planar array of a probe excited circular ring. The element of a bidirectional antenna is first designed to achieve the maximum directivity. The directivity can be further increased by arranging these elements to form the linear array. There are two types of linear array to be investigated i.e., on axis and off axis arrangement. On-axis linear array yields better directivity than off-axis linear array. Therefore, this orientation is further used to form the planar array. The radiation characteristics of this optimum planar array are rigorously reported. The proposed structure is very useful to extend the distance between the base station in PCT system.

• ETRI Journal
• /
• 제38권1호
• /
• pp.9-17
• /
• 2016

We demonstrate a time- and wavelength-division multiplexed passive optical network system employing a vertical-cavity surface-emitting laser array-based optical line terminal transceiver and a tunable bidirectional optical subassembly-based optical network terminal transceiver. A packet error-free operation is achieved after a 40 km single-mode fiber bidirectional transmission. We also discuss an arrayed waveguide grating, a photo detector array based on complementary metal-oxide-semiconductor photonics technologies, and low-cost key devices for deployment in access networks.

• Journal of Power Electronics
• /
• 제12권2호
• /
• pp.233-241
• /
• 2012

This paper presents a design of a 30kW 250V/530V bidirectional DC-DC converter to be used in an electrical car. A detailed explanation of the design is given. The system uses two phase shifted half bridge (boost and buck) topologies to reduce the ripple current in the output capacitor. The converter has an efficiency of 95% at nominal power. It works as a constant voltage in one direction and as a constant current in the other to charge the batteries. Simulations and measurement are done at high power to test the efficiency.

• ETRI Journal
• /
• 제35권2호
• /
• pp.245-252
• /
• 2013

In this work, we study the physical layer solutions for 10-gigabit-capable passive optical networks (PONs), particularly for an optical link terminal (OLT) including a 10-Gbit/s electroabsorption modulated laser (EML) and a 2.5-Gbit/s burst mode receiver (BM-Rx) in a novel bidirectional optical subassembly (BOSA). As unique features, a bidirectional mini-flat package and a 9-pin TO package are developed for a 10-gigabit-capable PON OLT BOSA composed of a 1,577-nm EML and a 1,270-nm avalanche photodiode BM-Rx, including a single-chip burst mode integrated circuit that is integrated with a transimpedance and limiting amplifier. In the developed prototype, the 10-Gbit/s transmitter and 2.5-Gbit/s receiver characteristics are evaluated and compared with the physical media dependent (PMD) specifications in ITU-T G.987.2 for XG-PON1. By conducting the 10-Gbit/s downstream and 2.5-Gbit/s upstream transmission experiments, we verify that the developed 10-gigabitcapable PON PMD prototype can operate for extended network coverage of up to a 40-km fiber reach.

• Journal of applied mathematics & informatics
• /
• 제9권1호
• /
• pp.349-357
• /
• 2002

In this paper, we analyze queueing behaviors and investigate the possibilities of reducing and controlling shortages and oversupplies in the bidirectional queueing system which forms a negative queue by demand and a positive queue by supply. Interarrival times of units in the bidirectional queueing system investigated are exponetially distributed. Instant pairing off implies that queue can be either positive or negative, but not both at the same time. The results include a proof that sum of queue lengths is minimized if rates of demand and supply in each system are equal and optimum solutions for rates of supply which minimize the sum of queue lengths when rates of demand and sum of rates of supply are given. In addition, the relationship between the ordinary queueing system and the bidirectional queueing system is investigated.

• 한국통신학회논문지
• /
• 제25권6A호
• /
• pp.813-817
• /
• 2000

WDM Ring의 경우 지금까지 UPSR/2나 BLSR/4 만 고려되어 왔었다. 그러나 본 논문에서는 WDM 장치의 상위 계층인 SDH의 보호측면 및 optical SNR의 측면에서 기존의 BLSR/4보다 장점이 많은 4-fiber bidirectional path switched ring을 제안하였다. 또한 이를 구현할 수 있는 2가지 방법에 대해 살펴보았고, 감시제어채널을 이용하지 않고도 제안된 보호/절체 구조를 구현할 수 있는 distributed control scheme에 대해 제시하였다.

• 한국통신학회논문지
• /
• 제25권9A호
• /
• pp.1441-1451
• /
• 2000

There are two types of protection switching : a) automatic switching and b) forced switching. The switching mechanism is generally realised by OAM functions, therefore, the required OAM information field should be reserved in the PLOAM cells. This paper proposes an unidirectional and a bidirectional protection switching method and potential advantages. The unidirectional protection switching method can be faster than the bidirectional method because the unidirectional method does not require an APS protocol for protection switching. The bidirectional protection switching method uses APS K1 byte and K2 byte, which is included in octets of a PST message through downstream or upstream PLOAM cells, for protection switching. As making comparisons between the unidirectional and the bidirectional protection. switching method, this paper proposes an effective constructing method for ATM-PON network.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 하계학술발표회 논문집
• /
• pp.35-36
• /
• 2007

We report a probe using a single double clad fiber (DCF) for fluorescence spectroscopy. Bidirectional separate transmission for excitation and fluorescence light in a single fiber was implemented. A DCF coupler made by side-polished method could extract none but the collected fluorescence signals propagating in inner cladding mode, thereby diminishing the interference of silica background generated by the excitation in core mode. The experimental results show that the fluorescence spectra of biological tissues obtained using the DCF probes have much less silica background than using a standard multiple-mode fiber.