• Journal of Navigation and Port Research
• /
• v.44 no.6
• /
• pp.439-446
• /
• 2020

The IMO has adopted emission standards through Annex VI of the International Convention for the Prevention of Pollution from Ships (MARPOL) that strictly prohibit the use of bunker C oil for vessels. In this study, we have adopted the turret-moored Floating LNG-Bunkering Terminal (FLBT) which is designed to receive the LNG from LNGCs and transfer it to LNG-bunkering shuttles in side-by-side moored condition. Numerical analyses were carried out using the high-order boundary-element method for four vessels at various relative distances. Mean wave drift forces were compared in an operational sea state. A model test was performed in the ocean engineering basin at the Korea Research Institute of Ships & Ocean Engineering (KRISO) to verify the safety of the berthing/unberthing operation. In the model test, a jig was designed to simulate tug boats pushing or pulling the bunkering vessels, so that the friction force of the g operation was not affected. Safety depended on the environmental direction, with more stable operation possible if the heading-control function of FLBT is applied to avoid beam-sea conditions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.209-216
• /
• 2024

Four accidents occurred between 2020 and 2022 after car ferries built according to a coastal passenger ship modernization plan collided with other ships or came into contact with the dock when entering Jeju Port. Accidents primarily occurred owing to careless ship handling and drift by wind during ship handled by herself using bow and stern thrusters without tugboats. Accordingly, in this study, we analyzed the collision accident focusing on car ferry H and the critical wind speed at which the ship cannot be controlled using its own power, tugboat operation plan in increasing wind speed were proposed based on the power required for the ship to berth parallel to the pier without a tugboat considering the external force and moment generated while the ship is berthing. A analysis of the critical wind speed of car ferry H by relative wind direction when using tugboats or not according to the loading status and the berthing speed, showed that one tugboat should be used at the stern when the lateral wind speed is over 10 m/s and two tugboats should be used when the lateral wind speed is over 14m/s berthing at Jeju port.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.4 no.2
• /
• pp.25-33
• /
• 1998

This paper deals with PC-based ship handling simulator, which is now widely utilized not only for total assessment of safety in harbour area but also for training purpose. The suitable mathematical model for low advance speed manoeuvre is treated with the effects of current, wind, wave, tug force and water depth. We adopt 3 dimensional graphic technique for perspective representation of relative ship motion. Some graphical panels on the screen are devised for data input/output or ship manoeuvring information. We show the real time simulation of berthing menoeuvre applied to Pusan harbour as an example.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.104-105
• /
• 2017

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.223-228
• /
• 2007

In recent trends of the enlargement and specialization, container ship, LNCG, PCC and passenger ship which have relatively large hull and superstructure above the water line, are already being operated in the world It is very important information for the safety operation of these vessels to estimate the ship's performance under the specific wind condition while berthing, unberthing or low-speed sailing. In this paper, the effect of wind force and moment acting on the training ship HANNARA is investigated by using the numerical calculations. The results of drift angle and counter rudder angle with the relative wind direction and force, the critical wind velocity with the ratio of wind velocity and ship's speed and maximum heeling angle with the wind velocity are shown The presented results can be applied directly to T/S HANNARA in berthing maneuver and avoiding typhoons, and utilized as an educational materials.

• Journal of Navigation and Port Research
• /
• v.29 no.10 s.106
• /
• pp.847-852
• /
• 2005

In order to evaluate the safety of navigation at sea and the safety of mooring on berthing, it is necessary that the wave and wind induced ship dynamic motion should be measured in real time domain for the validity of theoretical evaluation method such as sea-keeping performance and safety of mooring. In this paper, the basic design of sensors is discussed and some system configurations were shown. The developed system mainly consists of 4 kinds of sensors such as three-dimensional accelerator, two-dimensional tilt sensor, azimuth sensor and two displacement sensors. Using this measuring system, it can be obtained the 6 degrees of freedom of ship dynamic motions at sea and on berthing such as rolling, pitching, yawing, swaying, heaving, surging under the certain external forces.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.303-308
• /
• 2006

In this paper, the authors calculated manoeuvring motions of a large container vessel approaching to the newly built container piers to get alongside to her berth in Busan harbour. The motion calculations were done by using fixed coordinate system and the object of the calculations is to check the manoeuvring motions are safe or not for berthing the large vessel to her berth. The result of calculations manifested that a large container vessel can get alongside to the piers without any difficulty under normal weather conditions by using 2 Z. Peller tug boats of 4500 H.P. each and also these demonstrated it is difficult to conduct and get her alongside to the piers under rough weather conditions of wind force 16.9m/sec or more. Under rough weather conditions of 6 by beaufort scale the average wind velocity is about 13.5m and if we add 25% increase of the normal velocity to it, the wind will becomes a gust of 16.9m/sec. So it is advisable to avoid conducting a large container vessel to the pier under the rough weather conditions of 6 or more by beaufort scale. Also, I is better to use 3 Z. peller tug boats of 4500 HP. each under the above mentioned rough weather in a case of unavoidable circumstances.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.67-73
• /
• 2016

This study analyzed the state of the vessels which were using the berth for dangerous goods more than its carrying capacity in the major dangerous cargo handling port of Ulsan in Korea, The result of the analysis showed that a ship which has 3 times more than the maximum berthing capacity was moored at berth. Accordingly, a simulation model for 50,000 DWT berth was built and carried out the mooring safety analysis with 50,000 DWT, 70,000 DWT and 100,000 DWT vessels by mooring assessment program. The evaluation was carried out according to the standard environment presented in OCIMF standards. 50,000 DWT vessel was evaluated to meet the acceptable criteria but, 70,000 DWT and 100,000 DWT vessels exceeded the acceptable limit as per external conditions. Consequently, safe mooring guidelines were suggested and also proposed the building of common 'Mooring safety guideline' for port with assessment of different cases.

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.689-694
• /
• 2014

The Korean government has introduced and enforced maritime traffic safety assessment to secure traffic safety since 2010. The maritime traffic safety assessment is needed by law to design a new port or modify an existing one. According to Korea Maritime Safety Act, in the assessment the propriety of marine traffic system consists of the safety of channel transit and berthing/unberthing maneuver, safety of mooring, and safety of marine traffic flow. The safety of channel transit and berthing/unberthing maneuver can be evaluated only by ship-handling simulation. The ship-handling simulation is carried out by sea pilots working with the port concerned. The vessel's proximity measure is an important factor to evaluate traffic safety. The proximity measure is composed of vessel's closest distance to channel boundary and probability of grounding/collision. What is more, the probability of grounding becomes important. According to central limit theorem, a sample has a normal distribution on condition that its size is more than 30. However, more than 30 simulation runs bring about the increase of assessment period and difficulty of employing sea pilots. Therefore this paper is to find out minimum sample size for evaluating vessel's proximity. First sample sets of size of 3, 5, 7, 9 etc. are selected randomly on the basis of normal distribution. And then KS test for goodness of fit and t-test for confidence interval are applied to each sample set. Finally this paper decides the minimum sample size. As a result this paper suggests the minimum sample size of 5, that is, the simulation of more than five times.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.228-229
• /
• 2018

To deal with the increasing volume of the vessel's cargo in the container flow and the enlargement trend of the vessels, Pusan port is making efforts from various perspectives such as the creation of global infrastructure and the promotion and development of new wharves. If Pusan port can provide and prepare the eligible infrastructures for future berthing of larger vessels. It will be able to operate with vessels larger than 20,000TEU, and it will also be able to grow into one of the main port of the Mega max era.. However, when large vessels dock, many berths, equipment, working time and labors are required. As a result, the problem of delaying time of other consecutive vessels will inevitably arise. In response to this, we analyze the impact and effect of the birthing of a large vessel on other congestion vessels at a container terminal.