• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.543-550
• /
• 2009

This study was performed to prove the possibility of utilizing short plastic fibers made for recycled polyethylene terephthalate (RPET) as a structural material. In order to verify the capacity of RPET fiber, it was compared with polypropylene (PP) fiber, most widely used short synthetic fiber, for fiber volume fraction of 0%, 0.5%, 0.75%, and 1.0%. To measure material properties such as compressive strength, split tensile strength, appropriate tests were performed. Also, to measure the strength and ductility capacities of reinforced concrete (RC) member casted with RPET fiber added concrete, flexural test was performed on RC beams. The results showed that compressive strength decreased, as fiber volume fraction increased. These trends are similarly observed in the tests of PP fiber added concrete specimens. Split cylinder tensile strength of RPET fiber reinforced concrete increased slightly as fiber volume fraction increased. For structural member performance, ultimate strength, relative ductility and energy absorption of RPET added RC beam are significantly larger than OPC specimen. Also, the results showed that ultimate flexural strength and ductility both increased, as fiber volume fraction increased. These trends are similarly observed in the tests of PP fiber added concrete specimens. The study results indicate that RPET fiber can be used as an effective additional reinforcing material in concrete members.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.372-379
• /
• 2023

International oil prices are expected to increase from $85 a barrel this year to up to $100 a barrel in the second half of the year; this is likely to increase orders for offshore plants in the global market. One main characteristic of offshore plants is that a large helideck is located on the top side, and aluminum alloys are used as the basic material of the structure for weight reduction and corrosion resistance. Shipowners are increasing the size of helicopters to quickly evacuate lives in the event of an emergency, and the safety use load of devices that can stably secure helicopters to the deck is also required to increase. Owing to the nature of the aluminum material, the structural strength caused by welding is greatly reduced; therefore, the fixing device must be designed by embedding it in the deck and fixing it with bolts. In this study, a model applying aluminum alloy 6082-T6 was developed to develop a helicopter fastening device that can be used for large helidecks (diameter = 28 m). The developed item was verified through nonlinear structural strength calculation to satisfy the load used for the actual fastening condition. The load condition with a 45° showed a lower ultimate strength than the 90° case owing to local plastic collapse. The nonlinear structural collapse behavior showed a result similar to that of the experimental test. The main contents derived from this study are considered to be reference materials when evaluating the structural strength of similar aluminum equipment.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.8
• /
• pp.531-539
• /
• 2019

This study was intended to investigate the effects of parenting attitude of mothers of multicultural family and sensory processing skills of children on school readiness of preschool children. This study conducted Maternal Behavior Instrument(MBRI), Short Sensory Profile(SSP), and School readiness test on children of multicultural family and their mothers who are residing in Gwangju and Jeonnam, and results are as follows. According to the result of parenting attitude of mothers of multicultural family showed that total score 165.72±24.19. According to the result of investigating a correlation between parenting attitude of mothers of multicultural family and sensory processing skills of children on school readiness, only parenting attitude of mothers of multicultural family showed positive relationship with school readiness of children(p<.05). According to the result of investigating the effects of parenting attitude of mothers of multicultural family and sensory processing skills of children on school readiness, it was identified that parenting attitude of mothers of multicultural family makes significant effect on school readiness of children. To sum up, it is considered that parents education required for developing positive parenting attitude of mothers of multicultural family and mediations related to school readiness for school life adaptation of children of multicultural family are necessary for children of multicultural family to get adjusted to school life easily after they enter school.

• Korean Journal of Health Psychology
• /
• v.19 no.3
• /
• pp.711-727
• /
• 2014

The purpose of this study was to develop and standardize the Korean version of the Parent Mealtime Action Scale(K-PMAS). The parents of typically developing preschool and elementary school children (N=887) ranging in age from 1 to 11 years as well as parents of children with developmental disorders (N=116) completed the PMAS. A subset of the participants were retested for reliability and also completed the Children's Eating Behavior Inventory- Korean Version (K-CEBI), which was used for assessing validity. The confirmatory factor analysis revealed that the theoretically-based 8-factor structure of PMAS fit the data well. The PMAS scores suggested acceptable levels of internal consistency and test-retest reliability. Validity was also supported by significant correlations between the K-CEBI scores and the differences in K-PMAS scores between the parents of children with developmental disorders and those of typically developing children. The results of one-way ANOVA showed no significant differences in K-PMAS scores between the genders. However, there were significant differences across ages. The means and standard deviations of the PMAS scale scores are provided. Clinical and research implications as well as limitations are discussed.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.11
• /
• pp.7-22
• /
• 2023

In January 2022, a new legislation was enforced to enhance the safety of underground construction. Consequently, a comprehensive assessment of underground safety is now an integral part of the planning process, including an evaluation of its impact. Ensuring the stability of temporary retaining walls during underground excavation has become paramount, prompting a heightened focus on the assessment of underground safety. This study delves into the analysis of the Multi-axis Flat Continuous Soil Cement Wall retaining wall (MFS) construction method. This method facilitates the expansion of wall thickness in the ground and provides flexibility in selecting and spacing H-piles. Through laboratory model tests, we scrutinized the load-displacement behavior of the wall, varying the H-pile installation intervals using the MFS method. Additionally, a 3-dimensional numerical analysis was conducted to explore the influence of H-pile installation intervals and sizes on the load for different thicknesses of the MFS retaining wall. The displacement analysis yielded the calculation of the height of the arching effect acting on the wall. To further our understanding, a design method was introduced, quantitatively analyzing the results of axial force and shear force acting on the wall. This involved applying the maximum arching height, calculated by the MFS method, to the existing member force review method. The axial force and shear force, contingent on the H-pile installation interval and size applied to the MFS retaining wall, demonstrated a reduction effect ranging from 24.6% to 62.9%.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.3
• /
• pp.102-110
• /
• 2023

This paper introduces scarf welding process of thin substrates using flexible laser transmission welding (f-LTW) technology. We examined the behavior of tensile strength relative to the scarf angle for flexible applications. Thin plastic substrates with the thickness of less than 100 ㎛ were bonded and a jig to form a slope at the edge of the substrate was developed. By developing the scarf welding process, we successfully created a flexible bonding technology that maintains joint's thickness after the process. The tensile strength of the joint was assessed through uniaxial test, and we found that the tensile strength increases as the slope of bonding interface decreases. By conducting stress analysis at the bonding interface with respect to the slope angle, design factor of bonding structure was investigated. These findings suggest that the tensile strength depends on the geometry of the joint, even under the same process conditions, and highlights the significance of considering the geometry of the joint in welding processes.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.5
• /
• pp.323-330
• /
• 2023

The development of an analysis model that reflects the microstructure characteristics of polyvinyl alcohol (PVA) fiber-reinforced cementitious composites, which have a highly complex microstructure, enables synergy between efficient material design and real experiments. PVA fiber orientations are an important factor that influences the mechanical behavior of PVA fiber-reinforced cementitious composites. Owing to the difficulty in distinguishing the gray level value obtained from micro-CT images of PVA fibers from adjacent phases, fiber segmentation is time-consuming work. In this study, a micro-CT test with a voxel size of 0.65 ㎛³ was performed to investigate the three-dimensional distribution of fibers. To segment the fibers and generate training data, histogram, morphology, and gradient-based phase-segmentation methods were used. A U-net model was proposed to segment fibers from micro-CT images of PVA fiber-reinforced cementitious composites. Data augmentation was applied to increase the accuracy of the training, using a total of 1024 images as training data. The performance of the model was evaluated using accuracy, precision, recall, and F1 score. The trained model achieved a high fiber segmentation performance and efficiency, and the approach can be applied to other specimens as well.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.22-29
• /
• 2023

In the evaluation of seismic performance for structural materials and components, the loading rate and axial force can have a significant impact. Due to time-delay effects between input and output displacements, It is difficult to apply high-rate displacement in cyclic tests and hybrid simulations. Additionally, the difficulty of maintaining a consistent vertical load in the presence of lateral displacement has limited fast and real-time tests performed while maintaining a constant vertical load. In this study, slow, fast cyclic tests and real-time hybrid simulations were conducted to investigate the rate dependency and the influence of vertical loads of Isolation Bearing. In the experiment, the FLB System including an Adaptive Time Series (ATS) compensation and a state estimator was constructed for real-time control of displacement and vertical load. It was found that the vertical load from the superstructure and loading rate can have a significant impact on the strength of the seismic isolation bearing and its behavior during an earthquake. When conducting experiments for seismic performance evaluation, they must be implemented to be similar to reality. This study demonstrates the excellent performance of the system built and used for seismic performance evaluation and enables accurate and efficient seismic performance evaluation.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.12
• /
• pp.37-46
• /
• 2023

Dynamic soil properties are essential factors for predicting the detailed behavior of the ground. However, there are limitations to gathering soil samples and performing additional experiments. In this study, we used an artificial neural network (ANN) to predict dynamic soil properties based on static soil properties. The selected static soil properties were soil cohesion, internal friction angle, porosity, specific gravity, and uniaxial compressive strength, whereas the compressional and shear wave velocities were determined for the dynamic soil properties. The Levenberg-Marquardt and Bayesian regularization methods were used to enhance the reliability of the ANN results, and the reliability associated with each optimization method was compared. The accuracy of the ANN model was represented by the coefficient of determination, which was greater than 0.9 in the training and testing phases, indicating that the proposed ANN model exhibits high reliability. Further, the reliability of the output values was verified with new input data, and the results showed high accuracy.

• Journal of Industrial Convergence
• /
• v.22 no.2
• /
• pp.143-151
• /
• 2024

This study compared the health behaviors, health related clinical characteristics between individuals with Glycated Hemoglobin A1C≧6.5% and < 6.5% in 30~59yr. Factors that were associated with A1C were identified by sex, health behaviors, health literacy. This study was an observational study with a cross-sectional design based on data from 2019~2021 Korea National Health and Nutrition Examination Survey. Multiple logistic regression analysis was employed to compute the odds ratios of health behaviors to identify the risk factors for Glycated Hemoglobin. The prevalence of A1C≧6.5% among the total was 79.4%(weighted %, n=348). In the A1C≧6.5%, 71.8% were men. In univariate logistic regression for A1C≧6.5%, sex, duration with diabetes, and body mass index(BMI) were influencing factors. In multiple logistic regression by sex, the factors associated with A1C≧6.5 in women were as follows: education(OR 4.5; 95% CI:1.1, 18.5), duration with diabetes(OR 2.9; 95% CI 1.1, 7.9). Strategies should be targeted to improve health behaviors and clinical characteristics for those in their sex, women in low education level, duration with diabetes. Moreover, healthcare providers should understand the barriers to health behaviors and health literacy to effectively deliver healthcare service.