• Korean Journal of Food Science and Technology
• /
• v.17 no.2
• /
• pp.101-106
• /
• 1985

Dried soymilk residue(SMR) which was prepared by washing with ethanol and acetone, followed by drying at $60^{\circ}C$ was investigated for its sorption characteristics and the relationship between moisture content and water activity when it was mixed with wheat flour. During storage at $20^{\circ}C$ and various RH, an excess sorption phenomena was observed for solvent treated and dried SMR before equilibrium reached. A simple equation of log(dw/dt)=b log t+log a, where t is storage time(hr) and w is %$(H_2O)$ was drived for sorption or desorption rate of dried SMR at RH range of 12%-92%. From sorption isothermifigure, the moisture content(Mi) could be calculated from water activity by the equation of Mi=b Aw+a. The proposed equation was proved to have better fitness than those of the Smith isotherm equation or Lang and Steinberg equation for the mixture of dried SMR and wheat flour.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.1 no.1
• /
• pp.31-37
• /
• 1977

The effects of surfactants and concentration of NaOH in surfactant solution on the removal of free fatty acid soil from cotton fabrics were investigated. Cotton fabrics were soiled with palm itic acid which is the most common fatty acid found in natural oily soil and washed in Lauder-ometer with various types of surfactant with or without NaOH. The rate of soil removal was estimated by analyzing palmitic acid contents in fabric before ar d after washing. Analysis of palmitic contents was made by extracting palmitic acid with azeotropic mixture of alcohol-benzene and the extracts were titrated with standard NaOH solution. It was shown that the types of surfactant are important factor in free fatty acid removal and the efficiency increases in the following order: SLS$90\%$ of initial sorption. In relation to the mechanism of detergency, the suspending and emulsifying power of surfactants were also examined. From the results of this experiments, it could be concluded that the soap formation with alkali and the suspending power of surfactant arc significant factors in free fatty acid soil removal, but the emulsifying power of it is neglizible.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.14 no.1
• /
• pp.66-76
• /
• 2008

Purpose : The purpose of the study was to determine Effects of the ADL Group Study Program Training on Functional Independence and Quality of Life for the CNS Patients. Methods : Thirty patients with stroke were assigned to experimental and control group. During eight weeks, both group participated in the conventional physical therapy and only the experimental group added in the ADL Group Study program. Experimental group performed two a week for 8 weeks and both group were scored Mini-Mental State Examination-Korean version before the training. The data were analyzed with frequency, independent t-test, paired t-test using SPSS PC(ver.12.0). Results : The result of this study is as fallows : First, after eight weeks, the experimental group the significant improvement in Korean Activity Daily Living scale, washing(p<0.01), bathing, ambulation, toilet using(p<0.05) and decorating, the short distance transfer(p<0.05) in Korean Independent Daily Living scale, vitality(p<0.05) in Quality of Life score. Conclusion : These finding suggest that the ADL Group Study Program Training can be used to improve functional independent and quality of life for the CNS patients. Also, the result of this study can provide a reference for the successful therapeutic program in CNS patients.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.4
• /
• pp.233-238
• /
• 2020

PURPOSE. This study aims to compare the marginal fitness of two types of implant-supported fixed dental prosthesis, i.e., cementless fixation (CL.F) system and cement-retained type. MATERIALS AND METHODS. In each group, ten specimens were assessed. Each specimen comprised implant lab analog, titanium abutment fabricated with a 2-degree tapered axial wall, and zirconia crown. The crown of the CL.F system was retained by frictional force between abutment and relined composite resin. In the cement-retained type, zinc oxide eugenol cement was used to set crown and abutment. All specimens were sterilized with ethylene oxide, immersed in Prevotella intermedia culture in a 50 mL tube, and incubated with rotation. After 48 h, the specimens were washed thoroughly before separating the crown and abutment. The bacteria that penetrated into the crown-abutment interface were collected by washing with 500 µL of sterile saline. The bacterial cell number was quantified using the agar plate count technique. The BacTiter-Glo Microbial Cell Viability Assay Kit was used to measure bacterial adenosine triphosphate (ATP)-bioluminescence, which reflects the bacterial viability. The t-test was performed, and the significance level was set at 5%. RESULTS. The number of penetrating bacterial cells assessed by colony-forming units was approximately 33% lower in the CL.F system than in the cement-retained type (P<.05). ATP-bioluminescence was approximately 41% lower in the CL.F system than in the cement-retained type (P<.05). CONCLUSION. The CL.F system is more resistant to bacterial penetration into the abutment-crown interface than the cement-retained type, thereby indicating a precise marginal fit.

• Plant Journal
• /
• v.12 no.1
• /
• pp.24-28
• /
• 2016

In desulfurization facilities of oil-fired power plant, gypsum scale is attached in the absorber inner surface as the operating time increases. For this reason, the maximum possible load of the power generation is set down, resulting in further generation stop. Cleaning of absorber for scale removal can be determined at the time of setting down of the maximum possible load. In this study, 6 weeks before the maximum possible load of the power generation was down set, at the same time and desulfurization facilities outlet $SO_2$ concentration value was more than 130ppm, absorber differential pressure exceeded $380mmH_2O$, it was confirmed to be the time that has elapsed 44 weeks after the previous absorber cleaning. Cleaning time of the absorber was predicted to be a time which has elapsed 50 weeks from the previous cleaning time.

• The Research Journal of the Costume Culture
• /
• v.24 no.4
• /
• pp.431-440
• /
• 2016

The purpose of this research is to revive the colors of combination dyeing and mixed dyeing with natural dyestuffs. The fabrics used were cotton and rayon. The natural dyestuffs used in this research were indigo, Phellodendron amurense, and Caesalpinia sappan. The effects of combination dyeing were as follows. First, all samples showed deeper colors. Second, according to the results of the surface K/S measurement, while the surface K/S of cotton was over 15, that of rayon was over 17. Third, the results of the light fastness measurement showed the superiority (by over grade 4) of all the samples, except in the case of rayon fiber sample no. 6 (which had been pre-dyed with indigo five times before being dyed with P. amurense once and then being dyed with C. sappan once). In the color fastness to washing measurement, all fibers showed superiority (by over grade 3~4). In addition, the color fastness to dry cleaning of all fibers was satisfactory or excellent (by over grade 3). Fourth, according to the results of the tensile strength measurement, it tended to decrease in the case of cotton and increase in the case of rayon. Fifth, the results of the density measurement showed that the density of cotton decreased by about 15~20% in the case of warp and 10% in the case of weft for all samples. The density of rayon decreased 20% in the case of warp for all samples and increased 30% in the case of weft for all samples.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.11
• /
• pp.1584-1590
• /
• 2017

This paper presents a implementation method of reliable speed limitation controller considering motor parameter variation in high speed operation. In spinning process of drum washing machine, speed increase has to be limited when unallowable imbalance mass is detected. Otherwise, severe noise and vibration can happen because noise and vibration are proportional to imbalance mass. To detect imbalance mass, d-axis current magnitude is used. However, we have to compensate for back-emf and power supply variation by means of detecting them because d-axis current is affected by both of them. On the other hand, we have to carefully estimate back-emf because back-emf is affected by stator resistance variation and inverter voltage error. Stator resistance variation can happen by manufacturing process for mass production or temperature variation in running. And there are inverter voltage errors between command voltage from micro-computer to inverter and real voltage from inverter to motor because of rising and falling time delay and turn-on resistance of power semiconductor switch. To solve this problem, we propose 2-step align current injection method which is to inject step-wise current right before starting. By this method, we can simply obtain stator resistance by ratio of voltage without inverter voltage error and current, and we can measure inverter voltage error. So we can obtain more exact model current, and then by simple calculation with compensation gain, we can estimate more accurate motor back-emf. We show that this method works well. It is verified through experiments.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.9 no.3
• /
• pp.349-359
• /
• 2002

Purpose: The purpose of this study was two-fold : to describe the level of recognition of nosocomial respiratory infections by ICU nurses and to compare self evaluation and objective evaluation of nosocomial respiratory infection control practices by ICU nurses. Method: Data were collected from 78 nurses in intensive care units in one university affiliated hospital in Kyung Ki Province. Data were collected from March 4 to March 18, 2002. The recognition and self evaluation data were collected through a self report questionnaire and an objective evaluation which was done by observing the actual behavior of the nurses. Result: The results of this study showed that there was a significant positive relationship between recognition scores and self evaluation scores. However, there was no significant relationship between level of recognition and objective evaluation, nor between self evaluation and objective evaluation of infection control Practices by ICU nurses. Conclusion: ICU nurses In this study gave higher scores on self evaluation of their practice than were shown in the observation evaluation of actual practice. Moreover, in the objective evaluation the nurses had the lowest score on the item, 'washing hands before taking care of patients'. The results indicate that it is necessary to develop a standardized practice manual on nosocomial respiratory infection control in the ICU. Also, it is necessary to have a program to transfer knowledge into actual practice.

• Journal of the Korean Dietetic Association
• /
• v.12 no.3
• /
• pp.264-276
• /
• 2006

The purpose of this study was to propose HACCP system implementation properly and to secure the food safety of school foodservices in Pohang city since the proper facilities and equipment should be key factors in food safety and production. So this study was designed to evaluate existing equipment in food production area, receiving and dining area, and employee facilities. Questionnaire was mailed to 107 school foodservice dietitians in Pohang area and 97 were responded (90.7% response rate). Approximately sixty percent of foodservices were not available separate receiving or polluted area, fifty one percent were installed screen door for insecticidal and temperature and humidity control, and these environmental conditions were hard to keep kitchen dry and sanitary condition. Usually public schools were better equipped than private schools. Forty three percent of school foodservice had initial use of non-foodservice, opened before 1994, and thirty three percent of elementary school foodservice. Among employee facilities, hand washing sanitation stand was prepared seventy nine percent (78.9%) of school foodservices. Dietitians chose outworn equipment and facilities (30.9%), difficulties of maintaining standard temperature and humidity for foodservice (20.6%), lacking separate receiving or polluted area (13.4%), indirect contamination of water hoss (10.3%), and lacking employee facilities (10.3%) as critical points to correct in school foodservice. Therefore governmental regulating agencies must review and approval of plans prior to new construction or extensive remodeling of school foodservice facilities. In addition to these requirement, plan must be set-up step by step to implement HACCP system properly.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.10
• /
• pp.1529-1532
• /
• 2005

A simple and cost effective method for separation and preconcentration of Ag(I) at the $10^{-7}\;mol\;L^{-1}$ level in the environmental and mineral samples is present. The method is based on the flotation of Ag(I)-iodide complex as an ion-associate with ferroin in pH of 4 from a large volume of an aqueous solution (500 mL) using nheptane. The floated layer was then dissolved in dimethylsulfoxide (DMSO) for the subsequent spectrophotometric determination. Beer's law was obeyed over a range of 2.0 ${\times}$ $10^{-7}$-4.0 ${\times}$ $10^{-6}$ mol $L^{-1}$ with the apparent molar absorptivity of 2.67 ${\times}$ $10^5$ L $mol^{-1}\;cm^{-1}$. The detection limit (n = 5) was 4 ${\times}$ $10^{-8}$ mol $L^{-1}$, and RSD (n = 5) obtained for 2.0 ${\times}$ $10^{-6}$ mol $L^{-1}$ of Ag(I) was 2.2%. The interference effects of a number of elements was studied and found that only $Hg^{2+}$ at low concentration, and $Pb^{2+}$, $Cd^{2+}$, $Cu^{2+}$, and $Fe^{3+}$ ions at moderately high concentrations were interfered. To overcome on these interference effects, the solution was treated with EDTA at a buffering pH of 4 and passed through a column containing Amberlite IR-120 ionexchanger resin, just before the flotation process. The proposed method was applied to determine of Ag(I) in a synthetic waste water, a photographic washing sample and a geological sample and the results was compared with those obtained from the flame atomic absorption spectrometry. The results were satisfactorily comparable with together, so that the applicability of the proposed method was confirmed in encountering with the real samples.