• Journal of Plant Biology
• /
• v.13 no.4
• /
• pp.23-31
• /
• 1970

The rice variety, Kwanok, was reared in the water and land beds and transplanted to the reclaimed soil area, having an average salt concentration of 0.39%. Two levels of the moderate and late season cultures with 4 treatments were used. The K and Si contents of the stem part of land bed seedlings were somewhat smaller, but total carbohydrate remarkably larger, the C/N ratio was accordingly greater than water bed seedlings. The rooting ability of land bed seedlings was vigorous markedly in culture solutions, to which added various concentrations of NaCl, The rooting ability of each seedling water not much declined in theculturing solution of up to 9.4mmhos/cm, (0.6%) of salt concentration, but it was drastically declined in the salt concentration over that. It seemed that the critical salt concentration for the rooting rice plant. The land bed seedlings in each salty condition markedly decreased compared with the water bed seeldings in transpiration rate and it showed a stronger drought resistance and contained a large amount of chlorophyll at transplanting stage, and also showed higher stability of chlorophyll at rooting stage in the salt treatment. The number of panicles, panicle weight, number of grains per panicle and ratio of matured grains of the rice plant grown by the land bed seedlings were much greater and 1,000 grain weight was less than from water bed seedlings. The cultural practices with the land bed seedlings increased the rough rice yields by 15% and 11%, respectively, compared with the yields of the moderate and late season cultures by water bed seedlings.

• Journal of Korean Society of Forest Science
• /
• v.77 no.4
• /
• pp.414-420
• /
• 1988

This research was performed to estimate the degree of influence of relative light intensity and planting density on the weight growth in the trans-planting bed. The Piuns koraionsis seedlings treated for different degrees of shading on seed bed were planted in transplanting bed. 1. The seedling weight growth under 100% relative light intensity and $6{\times}6$ plot(36 individual) density showed the largest growth and the best growth was found during 26th of May 25 of June. 2. As the relative light intensity decrease and with planting density increased, the weight growth decreased. And the weight growth had a tendency to decrease after 26th of May-25th of June. 3. T/R ratio showed the highest value under 63% relative light intensity and $12{\times}12$ plot (224 individual) of planting density. The highest T/R ratio was found during 26th of July-25th August.

• Ocean and Polar Research
• /
• v.28 no.1
• /
• pp.13-23
• /
• 2006

This study was conducted to investigate the community structure and distributional pattern of meiobenthos on the sediment of the mangrove forest and seagrass bed in the Chuuk lagoon. The samples were collected by an acryl corer at 14 stations. Nematodes were the most abundant meiobenthos, followed by ciliophorans and polychaetes; these taxa comprised more than 70% of the total abundance at all stations. The meiofuuna sampled in seagrass bed were more diverse than those of mangrove substrates. Total densities were higher in mangrove stations than other sites, averaging 1,671 to $2,967inds/10cm^2$. Densities in seagrass area ranged between 605 and $1,053inds/10cm^2$. Biomasses, however, were higher in seagrass bed $(975-2,167{\mu}g\;free\;dry\;weight/10cm^2)$ than in mangrove area $(1,064-1,180{\mu}g\;free\;dry\;weight/10cm^2)$. Ordination chart by MDS of major meiofaunal density in each station showed difference between mangrove area and seagrass area in terms of habitat of meiobenthos.

• 한국연소학회:학술대회논문집
• /
• 2001.11a
• /
• pp.161-168
• /
• 2001

Sintering bed of iron ore in the steel making process is one of typical applications of solid fuel bed, which has relatively uniform progress of fuel and simple processes of combustion. The sintering bed was modelled as an unsteady one-dimensional progress of fuel layer containing the two phases of solid and gas. Cokes added to the raw mix of which the amount is about 3.5% of the total weight was assumed to form a single particle with other components. In the early predition results presented in this paper, the flame propagation within the bed was not sustained after the top surface of the bed was ignited with hot gas. It suggests that the model should be extended to consider the multiple solid phase, which can treat the ore particles and the coke particles separately.

• Journal of Energy Engineering
• /
• v.21 no.1
• /
• pp.43-46
• /
• 2012

A fluidized bed drying approach was utilized to the synthesis of water glass based silica aerogel powders. The effects of the fluidized bed drying conditions such as the superficial velocity and temperature of hot air and bead size as well as bead/wet-gel ratio, on the physical properties such as tapping density and productivity of the aerogel powders were systematically investigated. The experimental results showed that the amount of beads mixed with wet-gels in the fluidized bed column has the most profound impact on the fluidization efficiency, greatly enhancing the yield of the aerogel powders up to 98% with a proper bead/wet-gel weight ratio as compared to 72% without using beads. No significant change was observed in the tapping density over a wide range of the fluidized drying condition. Consequently the fluidized bed drying approach shows a good promise as an alternative route for the large-scale production of the aerogel powders.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.6
• /
• pp.884-894
• /
• 2011

Effects of temperature, volatile content, particle diameter and solid input weight were investigated in the batch fluidized bed reactor using OCN703-1100 particle as oxygen carrier and Roto coal and char as fuels. Two solid fuels represented the best reactivity at different temperature, $900^{\circ}C$ for Roto coal and $950^{\circ}C$ for char, respectively. However, we selected $900^{\circ}C$ as the best operating temperature because the improvement of reactivity of char at $950^{\circ}C$ was negligible. Char represented better reactivity than Roto coal because char contains low volatile than Roto coal. For both solid fuels, reactivities were improved with increasing of the particle diameter. These results were explained by solid mixing tests in a transparent fluidized bed using two char particles having different particle size ranges and OCN703-1100 particle. The bigger particle showed better solid mixing with OCN703-1100 particle, and therefore, represented better reactivity. For both solid fuels, reactivities were improved with increasing of the solid input weight within the experimental conditions of this study because the weight of coarse particles increased with the solid input weight increased, and therefore, these coarse particles can mix well with the oxygen carrier.

• Textile Coloration and Finishing
• /
• v.34 no.4
• /
• pp.241-249
• /
• 2022

As for military backpacks in Korea, utility backpack products equipped with various functions along with comfort and convenience are being developed. As a result, the volume and weight of the backpack increase, and many lightweight studies of the materials forming the backpack are being conducted. This study is a basic study on frame lightweight using fiber-reinforced composites to deal with aluminum, a back frame that maintains the shape of a backpack and provides stability when worn by combatants. As is known, only fiber-reinforced composites have sufficient light weight and mechanical properties, but the mechanical properties were reviewed by drilling holes to maximize the light weight. Tensile strength and flexural strength were measured by drilling 6mm, 12mm, 18mm, and 24mm holes, and the tensile strength and flexural strength were measured when 1, 3, 5, and 7 holes of 12mm were increased. As a result, even when the number of holes was increased, tensile strength did not change significantly, and the flexural strength showed to be higher in the case of 3 holes and 5 holes than in the case of 1 hole.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.3
• /
• pp.173-180
• /
• 2024

The purpose of this study was to determine the accuracy of chest compression according to the patient body weight and the rescuer's weight when performing chest compression on a cardiac arrest patient that occurred on a home bed. From January 07 to January 19, 2023, 36 paramedic students from N and S universities who completed the KBLS provider curriculum of the Korea Cardiopulmonary Resuscitation Association were measured at the subject's knee position, the depth of the mattress being pressed by the weight of the manikin, and the depth of the mattress being pressed by the weight of the manikin were measured during continuous chest compression for 2 minutes. As a result of the study, if a child's cardiac arrest is found at home, the patient is moved to the floor to proceed with chest compression, and the first witness to find an adult cardiac arrest is recommended to proceed on the bed rather than force the patient under the bed to proceed with chest compression.

• 한국연소학회:학술대회논문집
• /
• 2002.06a
• /
• pp.204-211
• /
• 2002

Combustion experiments are carried out to obtain the fundamental data for application of a internally circulating fluidized bed combustor to the combustion of paper sludge wastes. Experimental parameters are identified as secondary air ratio, sludge weight and water contents. The secondary air ratio was varied from 0 to 20% and water content was 14%, 25%, 35%, 45%, 62% and sludge weight was 30g, 60g, 90g. As a result, carbon conversion ratio was higher than injection of primary air. Emission of CO and NOx reduced with an increase of secondary air injection.

• KSBB Journal
• /
• v.17 no.1
• /
• pp.26-32
• /
• 2002

The aerobic bacterium Xanthomonas campestris was cultivated continuously in a three-phase fluidized bed bioreactor to produce extracellular polysaccharide xanthan, Fluidized particles of 8.0 mm glass beads were used for disintegrating the large air bubbles even at high viscosities to improve the gas-liquid oxygen transfer rate. Xanthin productivity [kg xanthan/kg cell dry mass·h] and molecular weight increased, with dilution rate in the continuous xanthan fermentations. The specific xanthan productivities were not limited by the oxygen transfer rate and were much higher in the continuous cultivations than those predicted by the results of the batch xanthan fermentations.