• 한국지형학회지
• /
• 제25권2호
• /
• pp.15-29
• /
• 2018

The sediment transport process in a river reflects the process of geomorphological change in the watershed, influencesthe river bed variation and the river channel migration, and is a parametric phenomenon that exhibits a dynamic self-adjusting process. Sediment load is divided into bedload and suspended load depending on the dominant mechanism. Quantitative sediment load is important information for solving river problems. Because it is difficult and time consuming to measure bedload, compared to that ofsuspended load, data on the sediment transport load and the research required for the gravel-bed rivers are insufficient. This study is to analyze the ratio of the bedload to the total sediment load in gravel-bed rivers. The sediment load ratio in gravel-bed rivers increases with the flow rate per unit width, and the rate of the bedload varies more rapidly than the suspended load. The sediment transport efficiency coefficient has been affected by the ratio of the flow depth to the mean diameter of particles and has been dependent on the shear velocity Reynolds number. So $A^{\ast}$ and $B^{\ast}$ are introduced to compensate for the uncertainties such as bed materials, sediment transport, and flow velocity distribution, and the coefficient of bedload ratio has been presented. For the sediment load data in experimental channels and rivers, A* was 3.1. The dominant variables of $B^{\ast}$ were $u_*d_m/{\nu}$ in the gravel-bed and h/dm in the sand-bed. When $B^{\ast}$ the is the same, in the experimental channels the coefficient of bedload ratio was affected by the bed forms, but in the rivers it was of little difference between the gravel-bed and sand-bed.

• 한국해안해양공학회지
• /
• 제7권3호
• /
• pp.257-264
• /
• 1995

파와 해류가 동시에 작용할 때 소류사 이동에 미치는 제 요인을 파악하고, 합성류 소류사량 산정을 위하여 이들 제 요인 중 평균마찰력과 최대마찰력을 모두 고려하기 위하여 하천 소류사량 산정식들 중 적절한 형식 몇가지를 선택하였다. 합성류에 의한 최대마찰력과 평균마찰력의 산정을 위하여 BYO 모형을 적용하였으며, 일방향흐름 마찰계수 산정식은 수정 Keulegan식을 사용하였고 등가조고는 일방향흐름 관측결과와 일치하는 마찰력이 산정되는 수치를 택하였다. 각 소류사량 산정식에 도입된 비례상수는 Bijker(1966)의 수조관측자료에 적용하여 결정하였으며, 최종 결과로부터 각 산정식을 비교하여 논하였다.

• 한국환경과학회지
• /
• 제23권2호
• /
• pp.323-330
• /
• 2014

Transport of bed load and suspended particle in coastal waters is main factor causing change in shoreline, and effective measurement method and appropriate equipment is required. To measure bed load and suspended particle transport an equipment was designed and manufactured, and it was applied in the field. The equipment consists of four main elements, body supporter, bed load and suspended particle sampler, sampler support and lock. Eight samplers were installed along the circumference of each supporter, and each sample is a 45-degree intervals. The field experiment was done once along Gyeongpo beach in August 2013. This note described the design and function of the equipment and results of field experiments.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.35-36
• /
• 2012

Part load operation usually covers large periods of the total operation time on the economic ground and electricity demand in small-scale boilers. Performance analysis of part load behavior is very important for the purpose of boiler operation optimization. A simple thermal calculation approach is applied to predict performance of a pilot-scale circulating fluidized bed (CFB) boiler at part load operation. Verification has been carried out by comparing between calculation results an operation data of the boiler.

• 대한토목학회논문집
• /
• 제26권3B호
• /
• pp.311-319
• /
• 2006

저면경계층에서 부유사와 소류사 flux를 포함하는 실제적인 표사이동에 기초한 지형변화모델(SED-FLUX)이 개발되었다. SED-FLUX는 파랑모듈, 동수역학 모듈 및 부유사농도, 순부상 flux($Q_s$)와 소류사 flux를 계산하는 표사수송 및 확산모듈을 포함하며, 소류사 flux는 파-흐름 공존장에서 검증된 van Rijn의 TRANSPOR 프로그램에 의해 평가되어진다. 저면에서 순부상 flux $Q_s$는 표사확산모듈에서 source/sink 항으로서 평가되어지며, 수심변화모듈은 수심변화량을 계산하고 시간에 따른 bed level의 변화를 계산한다. 모델의 검증을 위하여 소류사이동의 이동한계수심은 방사성 동위원소 추적자를 사용한 현장 실험자료와 파와 흐름에 의한 표사이동한계수심에 대한 몇몇 경험식과 비교되었다. 본 모델을 파에 의한 해빈 단면변화에 적용한 결과 입사파의 특성에 따른 명확한 침식과 퇴적분포를 나타내었다. 끝으로, 이안제 배후에서 파와 해빈류에 의한 수심변화를 계산한 결과 이안제의 배후에서 초기 tombolo의 형성을 보여주었다.

• 물과 미래
• /
• 제22권2호
• /
• pp.191-200
• /
• 1989

소류사의 입자이동속도와 소류사농도의 곱으로 소류사량을 계산할 수 있는 한 방법이 제시되었다. 본 연구에서 사립의 평균이동속도는 하상부근의 유속난류성분의 출현빈도가 정규분포 한다고 가정하고, 입자이동속도를 소류력의 함수와 하상부근의 평균유속의 곱으로 나타내었다. 소류사에 유효하게 작용하는 소류력을 구하기 위해서 Engelund가 제시한 식을 사용하여 유효마찰속도를 구하였으며 Engelund가 제시한 식의 적합성을 간접적으로 검증했다. 소류사농도를 구하기 위해서 호전·도상의 식을 사용하였다. 실험자료는 타 연구자들의 식과 비교되었으며 타 연구자들의 식과 비슷한 경향을 나타내었다. 소류력이 비교적 작은 경우를 제외하고 제시된 식에서 계산된 결과와 타연구자들의 자료는 잘 일치하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.161-166
• /
• 2004

Research for deposits in Nakdong eatuary that research about Nakdong eatuary's sediment flows out in Nakdong-kang so far had been progressed but research about deposits that is flowed in open sea is insufficient. Observed Nakdong eatuary's characteristic of sediment transfer through observation during the second during Buteo 20 days on February 6, 2004 in this research Resuspension bed load Flux appeared high the first result St.4 point and St.5 point. St.4 branch had much bed load amount that is flowed in the east, and bed load that St.5 branch is flowed in the south appeared much Tendency such as the first showed in the second result, but compare with the first result and St.5 branch had much bed load that is transfer in end. Bed load that is transfer in observation result Nakdong river was less. As this, can know that amount of sediment that is transfer in open sea more than deposits that is transfer in Nakdong river is much Is expected to exert effect that deposits that is transfer in open sea is high in Nakdong estuary's topography change. Specially, observation result is expected that Nakdong estuary's deposition tendency becomes Jinwoodo southern and Shinho southern.

• 한국환경과학회지
• /
• 제9권1호
• /
• pp.35-42
• /
• 2000

In this study, the movable bed model testing was carried out so as to analyze bed profile changes including predicting scouring and deposition of bed profile and to solve hydraulic problems affecting with bed and both-bank between upstream and downstream of intake weir in the Nakdong river channel. The movable bed model testing consists of fundamental test, movable model test and numerical analysis method respectively. The fundamental test was enforced to analyze relationship of discharge and sediment load in the tilting flume. When the movable model test was worked, it was shown that sediment budget between input sediment load and output sediment load was balanced exactly. As a result of movable model test, it was presented that scouring and deposition changes in quantities between the upstream and downstream of modification weir were less than those of nature and planning weir. Finally, numerical analysis method was operated by 1-dimensional bed profile changes model ; HEC-6 model so as to complement unsolving hard problems during movable model test. So, modification weir will sustained the stable bed profile changes than any other weirs in the study channel.

• 한국수자원학회논문집
• /
• 제33권6호
• /
• pp.711-723
• /
• 2000

현재 사용되고 있는 소류사량 산정식들은 형식의 다양함과 관련변수들의 불일치로 각 공식의 특징을 파악하기 힘들며 사용된 관측자료가 다르기 때문에 상대적인 비교가 어렵다. 한편 산정식의 유도과정에서 사용되는 기본적인 가정들의 개선여지가 많은 것으로 판단된다. 이러한 문제점들을 해결하기 위하여 소류사량과 직접적으로 관련된 여러 무차원수들을 제시하고 그들간의 관계식을 도출하였으며 가장 적합하다고 판단되는 무차원수를 도입하여 형식의 통일을 기하였다. van Rijn이 제시한 관계식을 보다 간단한 형식으로 도출하여 새로운 소류사량 산정식을 개발하였다. Brownlie(1981)가 수집 정리한 관측자료와 개발식을 대비하여 경험 계수의 적합한 수치를 도출하였으며 광범위한 조건에서 유효하고 정밀도가 높은 조정식을 개발하였다.

• Nuclear Engineering and Technology
• /
• 제55권1호
• /
• pp.180-189
• /
• 2023

We measured the heat load to a reactor vessel with and without the in-vessel debris bed under an IVR-ERVC condition. Mass transfer methodology was adopted based on heat and mass transfer analogy to achieve high Ra'_H of order ~10¹⁵ with compact test rigs. We postulated the in-vessel debris bed has a flat top and particulate debris was simulated as an identical diameter spheres. We conducted experiments varying the height of the debris bed and the results showed that Nusselt numbers decreased in both uppermost and curved surfaces with the increasing bed height. Once the debris bed is formed, it acts as an obstacle to the natural convective flow, which reduces the buoyancy. The reduction of driving force results in the impaired heat transfer in both upward and downward heat transfers.