• Journal of Welding and Joining
• /
• v.32 no.2
• /
• pp.22-28
• /
• 2014

To enhance productivity and provide high quality production material in a GMA welding process, weld quality, productivity and cost reduction affects the number of process variables. In addition, a reliable welding process and conditions must be implemented to reduce weld structure failure. In various industries the welding process mathematical model is not fully formulated for the process parameter and on the welding conditions, therefore only partial variables can be predicted. The research investigates the interaction between the welding parameters (welding speed, distance between electrodes, and flow rate of shielding gas) and bead geometry for predicting the weld bead geometry (bead width, bead height). Taguchi techniques are applied to bead shape to develope curve equation for predicting the optimized process parameters and quality characteristics by analyzing the S/N ratio. The experimental results and measured error is within the range of 10% presenting satisfactory accuracy. The curve equation was developed in such a way that you can predict the bead geometry of constructed machinery that can be used for making tandem welding process.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.6
• /
• pp.432-438
• /
• 1996

Native crystalline chitin was hydrolyzed in an agitated bead reaction system using crude chitinase excreted from Aspergillus fumigatus JC-19. The reaction was enhanced significantly, and the concentration and yield of reducing sugar after 48 hours were measured to be 35.42 g/I (w/v) and 0.64, respectively, around 1.86 times higher than those of the conventional system that was carried out without glass beads. The effect of reaction conditions, such as the amounts of chitin, chitinase and glass beads, and the size of glass bead, were examined. Ball milled chitin was also hydrolyzed in the agitated bead reaction system, the conversion yield and reaction rate of ball milled chitin for 24 hours increased up to 0.87 and 48.02 g/I, respectively. Chitinase showed relatively high stability in the agitated bead reaction system, particularly in the presence of enzyme stabilizer, $Ca^{++}$, which played a critical role in preventing the deactivation of chitinase by the physical impact of glass beads. The variations of the structural features of chitin during the reaction were followed by SEM and X-ray diffraction, and the enhanced hydrolysis reaction was caused by both the fragmentation of chitin particles and the destruction of the crystalline structure owing to the synergic effects of the attrition of glass beads and the hydrolytic action of chitinase.

• Journal of Life Science
• /
• v.9 no.3
• /
• pp.268-275
• /
• 1999

Rhodopseudomonas sp. was immobilized in three supports(agar, k-carrageenan, and PVA) in order to remove nitrate in wastewater coming from fish farm. Among them 3% agar was the most suitable support when denitrification rate and bead durability were tested. Optimum bead size was 4mm-diameter when the substrate transfer into the bead and shear stress for bead were considered, and optimum cell loading was 25mg dry $cells/cm^2$gel gel. Ethanol was the best as a carbon source, and optimum C:N ratio, temperature and pH were 1.5:1, $31^{\circ}C$,, and 6, respectively. Under these conditions the maximum denitrification rate in synthetic wastewater was $$345{\MU}{\ell};N_2/Cm^3 gel{\cdot}hr;and that in modified MYC medium was 450{\MU}{\ell}};N_2/Cm^3 gel{\cdot}hr $$.

• Environmental Mutagens and Carcinogens
• /
• v.25 no.4
• /
• pp.157-160
• /
• 2005

Antibiotic resistance of bacteria in the biofilm mode of growth contributes to the chronicity of infection and disease. The penetration of antibiotic, through biofilm developed in an itt vitro model system was investigated. Antibiotic resistant bacteria (E. coli) were obtained from Culture Collection of Antibiotic Resistant Microbes. Ca-alginate bead used as simulated biofilm and a cell entrapment test using compressed air were experiment for the improvement cell viability. Antibiotic susceptibilities though biofilms was measured by assaying the concentration of antibiotic that diffused through the biofilm to minimal inhibition concentration (MIC). Survival of immobilized cells were reduced as compared to free cells. In case of antibiotic susceptible E. coli reduced continuously, but antibiotic resistant E. coli kept up survival rate constantly. Survival was showed after exposed to the antibiotics that the more treated antibiotic resistant E. coli and low concentration of antibiotics) the more survived.

• Applied Chemistry for Engineering
• /
• v.3 no.3
• /
• pp.430-439
• /
• 1992

To improve the adhesion of interface and dispersion of glass beads in the composite, HDPE filled with glass brads, we encapsulated the g1ass beads with polymer by phase separation method using complex coacervation in organic solvent. EMAA and EAA were used as the polymeric wall materials. The microencapsulation efficiency and morphology were observed by thermogravimetric analysis and SEM, respectively. And also we investigated the physical and dynamic mechanical properties of the composite as the function of the beads contents and microencapsulation efficiency. Compared with the composite containing non-treated glass beads, the decrease in tensile strengthe of the composites containing the encapsulated glass beads become markedly small, and about 30~40% Increase in tensile modulus was observed. From the results of the dynamic mechanical analysis, it was found that the adhesion of interface and dispersion could be improved upon encapsulation.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.902-907
• /
• 1998

In this study the anaerobic degradation of nitrate by in GFM (gel and foam matrix) and bead gel immobilized Paracoccus denitrificans DSM 65 in continous culture was conducted. A novel GFM immobilization system was developed in order to improve conventional system (bead). With increasing nitrate concentration in water, the nitrate reduction rate was increased. The observed maximum denitrification rate by in GFM immobilized cells was 177 mg/L h in buffered water, while that was 33 mg/L h in tap water. In comparison with bead system the reduction activity by GFM system showed $1.2{\sim}2.1$ times better. The denitrification activity was not changed after 16 days storage at $5^{\circ}C$ and also showed better activity than that of free cells or even bead immobilized cells.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.4
• /
• pp.301-309
• /
• 2021

Chitosan, natural organic polymer, has been applied in water treatment as adsorbent due to non-toxic for human being. The amino group as functional group, can interacts with cation and anion at the same time. The prepared chitosan bead (HCB) was crosslinked to increase chemical stability (HCB-G) and both HCB and HCB-G were prepared to increase physical strength by drying referred to DCB and DCB-G, respectively. The adsorption effect for crosslinking and drying for four types of chitosan bead was tested using pseudo fist order (PFO), pseudo second order (PSO), and intraparticle diffusion model (ID). Regardless of PFO and PSO, the order of K, rate constant, is as followed: HCB > HCB-G > DCB > DCB-G for Cu(II) and phosphate. Drying leading to contraction of bead significantly reduced adsorption rate due to reduce the porosity of chitosan. In addition, crosslingking also negatively effect on adsorption rate. When compared with Cu(II) using hydrogel bead, phosphate showed higher value than Cu(II) for PFO and PSO. The application of ID showed that both hydrogel beads (HCB and HCB-G) obtained a very low R² ranging to 0.37 to 0.81, while R² can be obtained to over 0.9 for DCB and DCB-G, indicting ID is appropriate for low adsorption rate.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.4
• /
• pp.241-248
• /
• 2022

Shear Reinforcement of Dual Anchorage(SRD) is used to reinforce the safety of reinforced concrete structures at construction sites. Welding is used to make shear reinforcement, and welding plays an important role in determining productivity and competitiveness of products. Therefore, a weld bead detection inspection is required. In this paper, we suggest an algorithm for inspecting welding beads using image data of welding beads. First, the proposed algorithm calculates a brightness value in a vertical direction in an image, and then divides a welding bead in a vertical direction by finding a position corresponding to a 50% height point of the brightness value distribution in the image. The welding bead area is also divided in the same way for the horizontal direction, and then the segmentation image is analyzed if there is a welding bead. The proposed algorithm reduced the amount of computation by performing analysis after specifying the region of interest. In addition, accuracy could be improved by using all brightness values in the vertical and horizontal directions using the difference of brightness between the base metal and the welding bead region in the SRD image. The experiment compared the analysis results using five algorithms, such as K-mean and K-neighborhood, as a method to detect if there is a welding bead, and the experimental result proved that the proposed algorithm was the most accurate.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2006.05a
• /
• pp.111-112
• /
• 2006

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.206.1-206.1
• /
• 2005