• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.8
• /
• pp.2140-2156
• /
• 2023

The Wireless Sensor Network (WSN), is constructed out of teeny-tiny sensor nodes that are very low-cost, have a low impact on the environment in terms of the amount of power they consume, and are able to successfully transmit data to the base station. The primary challenges that are presented by WSN are those that are posed by the distance between nodes, the amount of energy that is consumed, and the delay in time. The sensor node's source of power supply is a battery, and this particular battery is not capable of being recharged. In this scenario, the amount of energy that is consumed rises in direct proportion to the distance that separates the nodes. Here, we present a Hybrid Firefly Glow-Worm Swarm Optimization (HF-GSO) guided routing strategy for preserving WSNs' low power footprint. An efficient fitness function based on firefly optimization is used to select the Cluster Head (CH) in this procedure. It aids in minimising power consumption and the occurrence of dead sensor nodes. After a cluster head (CH) has been chosen, the Glow-Worm Swarm Optimization (GSO) algorithm is used to figure out the best path for sending data to the sink node. Power consumption, throughput, packet delivery ratio, and network lifetime are just some of the metrics measured and compared between the proposed method and methods that are conceptually similar to those already in use. Simulation results showed that the proposed method significantly reduced energy consumption compared to the state-of-the-art methods, while simultaneously increasing the number of functioning sensor nodes by 2.4%. Proposed method produces superior outcomes compared to alternative optimization-based methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1B
• /
• pp.21-30
• /
• 2012

Sensor networks are composed of a great number of sensor nodes with constrained battery. Disjoint multipath scheme based flooding method has a merit that efficiently construct multipath in irregular networks, but causes lots of energy consumption in networks. Flooding method is not a suitable technology in wireless sensor networks with constrained battery. We introduce energy-efficient geographic routing scheme considered as an efficient, simple, and scalable routing protocol for wireless sensor networks. The geographic routing scheme on multipath generates a problem with a congestion. So we introduce the concept of multipath pipeline as a congestion avoidance strategy. But multipath pipelines have a big problem on the boundary of holes under irregular networks. We propose a novel disjoint multipath scheme as combined method with geographic routing scheme and hole detouring algorithm on multipath. A novel disjoint multipath scheme constructs disjoint multipath pipelines efficiently for reliability without a collision in irregular wireless sensor networks. Simulation results are provided to validate the claims.

• Journal of KIISE:Information Networking
• /
• v.34 no.4
• /
• pp.262-268
• /
• 2007

The efficient node-energy utilization in wireless sensor networks has been studied because sensor nodes operate with limited power based on battery. To extend the lifetime of the wireless sensor networks, maintaining balanced power consumption between sensor nodes is more important than reducing total energy consumption of the overall network. Since a large number of sensor nodes are densely deployed and collect data by cooperation in wireless sensor network, keeping more sensor nodes alive as possible is important to extend the lifetime of the sensor network. In this paper, we submit an efficient energy aware routing protocol based on AODV ad hoc routing protocol for wireless sensor networks to increase its lifetime without degrading network performance. The proposed protocol is designed to avoid traffic congestion on minor specific nodes at data transfer and to make the node power consumption be widely distributed to increase the lifetime of the network. The performance of the proposed protocol has been examined and evaluated with the NS-2 simulator in terms of network lifetime and end-to-end delay.

• The KIPS Transactions:PartC
• /
• v.16C no.5
• /
• pp.629-636
• /
• 2009

Since all sensor nodes in wireless sensor networks work by their own embedded batteries, if a node runs out of its battery, the sensor network can not operate normally. In this situation we should employ the routing protocols which can consume the energy of nodes efficiently. Many protocols for energy efficient routing in sensor networks have been suggested but LEACH and PEGASIS are most well known protocols. However LEACH consumes energy heavily in the head nodes and the head nodes tend to die early and PEGASIS - which is known as a better energy efficient protocol - has a long transfer time from a source node to sink node and the nodes close to the sink node expend energy sharply since it makes a long hop of data forwarding. We proposed a new hybrid protocol of LEACH and PEGASIS, which uses the clustering mechanism of LEACH and the chaining mechanism of PEGASIS and it makes the life time of sensor networks longer than other protocols and we improved the performance 33% and 18% higher than LEACH-C and PEGASIS respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.6 s.336
• /
• pp.23-32
• /
• 2005

This paper proposes a new algorithm for the energy constraint ad-hoc network which efficiently spread the energy usage over the network through the backup route scheme in order to increase the network lifetime. Recently, the various energy-efficient routing algorithms based on On-demanding method are proposed. Among them, PSR(Power-aware Source Routing) increased the network lifetime through the periodical route alternation depended on the use of the battery while DSR(Dynamice Source Routing) uses only the route selected during the route discovery phase. But PSR has a problem that it increases the route overhead because of the frequent flooding for the route alternation. For solving this problem, we propose HPSR(Hierarchical Power-aware Source Routing) which uses the backup route set during the route discovery in order to alternation the route without the flooding. HPSR increases the network lifetime due to the frequent route alternation using backup route while it decreases the routing overhead due to the reduced flooding. In this paper, we also prove the performance of HPSR through the simulation using OPNET.

• Journal of Communications and Networks
• /
• v.5 no.3
• /
• pp.266-274
• /
• 2003

One of the major issues in current on-demand routing protocols for ad hoc networks is the high resource consumed by route discovery traffic. In these protocols, flooding is typically used by the source to broadcast a route request (RREQ) packet in search of a route to the destination. Such network-wide flooding potentially disturbs many nodes unnecessarily by querying more nodes than is actually necessary, leading to rapid exhaustion of valuable network resources such as wireless bandwidth and battery power. In this paper, a simple optimization technique for efficient route discovery is proposed. The technique proposed herein is location-based and can be used in conjunction with the existing Location-Aided Routing (LAR) scheme to further reduce the route discovery overhead. A unique feature of our technique not found in LAR and most other protocols is the selective use of unicast instead of broadcast for route request/query transmission made possible by a novel reuse of routing and location information. We refer to this new optimization as the UNIQUE (UNIcast QUEry) technique. This paper studies the efficacy of UNIQUE by applying it to the route discovery of the Dynamic Source Routing (DSR) protocol. In addition, a comparative study is made with a DSR protocol optimized with only LAR. The results show that UNIQUE could further reduce the overall routing overhead by as much as 58% under highly mobile conditions. With less congestion caused by routing traffic, the data packet delivery performance also improves in terms of end-to-end delay and the number of data packets successfully delivered to their destinations.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.127-132
• /
• 2008

Wireless sensor network technologies applicable to various industrial fields are rapidly growing. Because it is difficult to change a battery for the once distributed wireless sensor network, energy efficient design is very critical. In order to achieve this purpose in network design, a number of studies have been examining the energy efficient routing protocol. The sensor network consumes energy in proportion to the distance of data transmission and the data to send. Cluster-based routing Protocols such as LEACH-C achieve energy efficiency through minimizing the distance of data transmission. In LEACH-C, however, the total distance between the nodes consisting the clusters are considered important in constructing clustering. This paper examines the cluster-head-selection-algorithm that reflect the distance between the base station and the cluster-head having a big influence on energy consumption. The Proposed method in this paper brought the result that the performance improved average $4{\sim}7%$ when LEACH-C and the base station are located beyond a certain distance. This result showed that the distance between cluster-head and the base station had a substantial influence on lifetime performance in the cluster-based routing protocol.

• The KIPS Transactions:PartC
• /
• v.17C no.5
• /
• pp.433-440
• /
• 2010

Energy efficiency, low latency and scalability for wireless sensor networks are important requirements, especially, the wireless sensor network consist of a large number of sensor nodes should be minimized energy consumption of each node to extend network lifetime with limited battery power. An efficient algorithm and energy management technology for minimizing the energy consumption at each sensor node is also required to improve transfer rate. Thus, this paper propose no-overlap multi-pass protocol provides for sensor data transmission in the wireless sensor network environment. The proposed scheme should minimize network overhead through reduced a sensor data translation use to searched multi-path and added the multi-path in routing table. Proposed routing protocol may minimize the energy consumption at each node, thus prolong the lifetime of the sensor network regardless of where the sink node is located outside or inside the received signal strength range. To verify propriety proposed scheme constructs sensor networks adapt to current model using the real data and evaluate consumption of total energy.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.9
• /
• pp.1-7
• /
• 2008

The efficient node energy utilization in wireless sensor networks has been studied because sensor nodes operate with limited power based on battery. Since a large number of sensor nodes are densely deployed and collect data by cooperation in wireless sensor network, keeping more sensor nodes alive as possible is important to extend the lifetime of the sensor network. Energy efficiency is an important factor of researches that efficient routing algorithm is needed in wireless sensor network. In this research, I consider some methods to utilize more efficiently the limited power resource of wireless sensor networks. The proposed algorithm is the sink first divides the network into several areas with hop counts and data transmission based on cluster ID. The performance of the proposed algorithm has been examined and evaluated with NS-2 simulator in terms of lifetime, amount of data and overhead.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.608-614
• /
• 2009

In wireless sensor networks, there are hundreds to thousands of small battery powered devices which are called sensors. As sensors have a limited energy resources, there is a need to use it effectively. A clustering based routing protocol forms clusters by distributed algorithm. Member nodes send their data to their cluster heads then cluster heads integrate data and send to sink node. In this paper we propose an energy efficient cluster-head selection algorithm. We have used some factors(a previous cluster head experience, a existence of data to transmit and an information that neighbors have data or not) to select optimum cluster-head and eventually improve network lifetime. Our simulation results show its effectiveness in balancing energy consumption and prolonging the network lifetime compared with LEACH and HEED algorithms.