• Membrane Journal
• /
• v.8 no.1
• /
• pp.29-41
• /
• 1998

Thin-film composite reverse osmosis membranes of aromatic polyamides were prepared by the interfacial polymerization. Aromatic polyamides as active skin layer were made from the interfacial polymerization of MPD(m-phenylene diamine) in the aqueous and TMC(trimesoyl chloride) in HCFC(1,1-dichloro-1-fluoroethane) organic solvent. The performances of the various reverse osmosis composite membranes prepared by changing processing variables were examined. The performance of membrane manufactured by batch system was varied with organic solvent, monomer concentration, dipping time, heat treatment temperature, acid acceptor, ethanol post treatment, and acid post treatment. Ethanol post treatment was the most dominant factors in increasing permeate amount, while the monomer concentration and dipping time were the main factors in increasing selectivity. The spiral-wound module was produced with the membrane prepared at optimum condition of the continuous process. Comparing the performance of this membrane module made here with that of commercial membrane module, the permeate flux was increased by 33% while the rejection was decreased by 5%.

• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.437-442
• /
• 2016

A new route for PBT (Poly butylene terephthalate) production from recycled PET (Poly ethylene terephthalate) has been explored. The route consists of glycolysis of PET (Poly ethylene terephthalate) wastes using 1,4-butandiol into BHBT oligomers and polycondensation of the oligomers into PBT oligomer. This process uses post-consumer or post-industrial recycled PET and converts it into high-end PBT type engineering thermoplastic via a chemical recycling process. Zink acetate was used as a catalyst for both glycolysis and polycondensation. Two types of reactor for the glycolysis, batch and semi-batch reactor, were investigated and their performances were compared. Semi-batch reactor removes ethylene glycol (EG) and THF (tetrahydrofuran) during the reaction. Amounts of EG and THF generated during the glycolysis reaction were measured and used as criteria for the reactor performance. Performance of semi-batch reactor was shown to be better than that of batch reactor. Optimum reaction condition for the semi-batch reactor was BD/PET ratio of 4, and reaction temperature of $220^{\circ}C$, giving high EG yield (max 91%) and low production of THF. In addition, it was confirmed that the molecular weight of PBT oligomer increases in accordance with the progress of the polycondensation reaction.

• Textile Coloration and Finishing
• /
• v.11 no.6
• /
• pp.36-42
• /
• 1999

The antimicrobial activities of the copolymer of N,N'-dimethyl- N,N'-diallyl ammonium chloride(DMDAAC) and diallyl amino(DA) were investigated. The copolymer of DMDAAC and DA was prepared by free radical Polymerization through an intra-intermolecular propagation mechanism ie, cyclopolymerization. The copolymer was, then, reacted with cyanuric chloride for reactivity with hydroxyl group of cellulose. Cotton fabrics were finished by synthesized polymer, and their antimicrobial activities and fastness to launderings were tested. Dichlorotriazinyl DMDAAC-DA copolymer has MIC value of 1ppm against S. aureus and 10ppm against K pneumoniae. The antimicrobial fastness of the finished cotton to launderings were good enough to show colony reduction above 70% against S. aureus and K pneumoniae after 50 repeated laundering in anionic commercial detergent. Optimum treatment concentrations of the polymer were 0.5% in cold pad-batch method, and 0.1% in pad-dry method.

• Fibers and Polymers
• /
• v.4 no.3
• /
• pp.97-101
• /
• 2003

Polymer/silicate nanocomposites were prepared via two-step manufacturing process: a master batch preparation and then mixing with matrix polymer. A hybrid of PMMA and Na-MMT with exfoliated structure was first prepared by emulsion polymerization of MMA in the presence of Na-MMT. For the case that SAN24, miscible with PMMA, is used as matrix, we could prepare a nanocomposite with exfoliated structure. However, SAN31 nanocomposite shows the aggregation and/or reordering of the silicate layers due to the immiscibility between SAN31 and PMMA.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.3
• /
• pp.289-297
• /
• 2005

In order to improve resistant properties of water-borne acrylic pressure sensitive adhesives(PSAs) for automobiles, this study was carried out. Removable PSAs for automobiles were synthesized by emulsion polymerization of monomers, n-butyl acrylate(BA), n-butyl methacrylate(BMA), acrylonitrile(AN), acrylic acid(AA) and 2-hydroxyethyl methacrylate(2-HEMA), and AA and 2-HEMA could act as functional monomers for crosslink. Emulsion polymerization was carried out in a semi-batch type reactor. Water resistance, heat resistance, acid resistance, alkali resistance and smoke resistance were examined. As a result, water resistance increased with the amount of BMA, however, the effect of BMA content on the water resistance was insignificant at a range of over 14 wt%. The water resistance also increased with the amount of functional monomers, AA and 2-HEMA. The prepared PSAs satisfied all the standard for automobiles except heat resistance. However, the heat resistance comes nearly up to the standard. Also, acid resistance, alkali resistance and smoke resistance of the prepared PSAs satisfied with the standard.

• Journal of Environmental Science International
• /
• v.23 no.8
• /
• pp.1419-1428
• /
• 2014

Electron beam-induced grafting polymerization was employed to prepare Acrylic acid-grafted bacterial cellulose (BC-g-AAc). BC-g-AAc as an adsorbent was applied to remove heavy metals (e.g., As, Pb, and Cd). This study examined followings; morphological change of surface, adsorptive behavior of BC-g-AAc, and interpretation of adsorptive kinetics. Specific surface areas of BC and BC-g-AAc were $0.9527m^2g^{-1}$ for BC and $0.2272m^2g^{-1}$ for BC-g-AAc, respectively as measured by BET nitrogen adsorption, revealing the morphological change of the surface of BC-g-AAc. Batch adsorption test was performed to investigate adsorptive behavior of BC-g-AAc in aqueous solution. The amounts of Pb and Cd adsorbed on BC-g-AAc were $69mg\;g^{-1}$ and $56mg\;g^{-1}$, respectively. However, As was not adsorbed on BC-g-AAc due to its neutral nature. Both the Benaissa model and the Kurniawan model were applied in the study to interpret adsorptive kinetics. From the value of correction coefficient ($R^2$), adsorptive kinetics of Pb and Cd were subjected to Kurniawan model referred to pseudo-second-order. Taken together, the results of this study show that BC-g-AAc has potential as a heavy metal (eg., Pb, Cd)-adsorbent made of an environmentally friendly material.

• Advances in materials Research
• /
• v.9 no.4
• /
• pp.251-263
• /
• 2020

α-mangostin imprinted polymers have been synthesized by a non-covalent imprinting approach with α-mangostin as a template molecule. The α-mangostin molecularly imprinted polymers (MIPs) prepared by radical polymerization using methacrylic acid, ethlylene glycol dimethacrylate, benzoyl peroxide, and acetonitrile, as a monomer, crosslinker, initiator, and porogen, respectively. The template was removed by using methanol:acetic acid 90:10 (v/v). The physical characteristics of the polymers were investigated by Fourier Transform Infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The rebinding studies were carried out by batch methods. The results exhibited that the MIPs was able to adsorb the α-mangostin at pH 2 and the contact time of 180 min. The kinetic adsorption data of α-mangostin performed the pseudo-second order model and followed the Langmuir isotherm model with the adsorption capacity of 16.19 mg·g-1. MIPs applied as a sorbent material in solid-phase extraction, namely molecularly imprinted solid-phase extraction (MISPE) and it shows the ability for enrichment and clean-up of α-mangostin from the complex matrix in medicinal herbal product and crude extract of mangosteen (Garcinia mangostana L.) pericarp. Both samples, respectively, which were spiked with α-mangostin gives recovery more than 90% after through by MISPE in all concentration ranges.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.10
• /
• pp.543-550
• /
• 2016

Amine-type PP-g-VBC-EDA adsorbent, which possesses anionic exchangeable function, was prepared through photoinduced graft polymerization of vinylbenzyl chloride (VBC) onto polypropylene non-woven fabric and subsequent amination reaction using ethylenediamine (EDA). Adsorption characteristics of anionic nutrients on the PP-g-VBC-EDA adsorbent have been studied by batch adsorption experiments. The equilibrium data well fitted the Langmuir isotherm model, and the maximum monolayer sorption capacity was found to be 59.9 mg/g for $NO_3-N$ and 111.4 mg/g for $PO_4-P$. The adsorption energies were higher than 8 kJ/mol indicating anion-exchange process as the primary adsorption mechanism. The pseudo-second order kinetic model described well the kinetic data and resulted in the activation energy of 9.8-36.7 kJ/mol suggesting that the overall rates of $NO_3-N$ and $PO_4-P$ adsorption are controlled by the chemical process. Thermodynamic parameters such as ${\Delta}G^o$, ${\Delta}H^o$ and ${\Delta}S^o$ indicated that the adsorption nature of PP-g-VBC-EDA for anionic nutrients is spontaneous and exothermic. The PP-g-VBC-EDA could be regenerated by washing with 0.1 N HCl.

• Journal of Life Science
• /
• v.19 no.4
• /
• pp.457-461
• /
• 2009

We optimized dextranase culture conditions by batch fermentation using Lipomyces starkeyi KCTC 17343. Furthermore, dextranase was purified by an ultra-membrane, and then dextran hydrolyzates were characterized. Cell growth and dextranase production varied depending on the initial culture pH and temperature. The conditions of optimal dextranase production were met in a pH range of 4-5 and temperature between $25-30^{\circ}C$. At optimal fermentation conditions, total enzyme activity and specific enzyme activity were about 4.85 IU/ml and 0.79 IU/g cells, respectively. The specific growth rate was examined to be $0.076\;hr^{-1}$. The production of dextranase in culture broth was very stably maintained after mid-log phase of growth. The enzyme hydrolyzed dextran into DP (degree of polymerization) 2 to 8 oligodextran series. Analysis of the composition of hydrolysates suggested that the enzyme produced is an endo-dextranase.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.81-85
• /
• 2005

Pressure sensitive adhesive (PSA) was prepared by semi-batch emulsion polymerization of acryl monomers in the presence of reactive and non-reactive carboxylated polyurethane resin (PUR). Effects of the PUR type, its content, and crosslinker feeding method on the adhesive properties of the PSA was investigated. In this experiment, the PSA prepared with the reactive PUR showed better adhesive property then the PSA with the non-reactive PUR. Especially, peel strength of the PSA, where acetoacetoxy ethyl methacrylate and 1,6-hexane diamine as crosslinkers were introduced, was dramatically enhanced in severe humidity condition due to the interfacial crosslinking.