• Journal of Microbiology and Biotechnology
• /
• v.13 no.5
• /
• pp.641-646
• /
• 2003

An accurate and efficient method for measuring the mass of hairy roots using conductometry is established. A conductivity equation expressed in terms of the concentration of the ion species in the medium is suggested. By using this equation, the effect of the individual ions on the total conductivity can be quantitatively analyzed. An equation for the in situ estimation of the cell growth coefficient for determining the mass of hairy roots is established based on measurements of the nitrogen concentration and conductivity during cultivation. The proposed equation does not require preliminary experiments to determine the cell growth coefficient. Instead, the physiological characteristics of the plant species are reflected by introducing the cellular nitrogen content. Since the cell growth coefficient is determined by measuring the major ionic nutrient concentrations, it is more effective to express the dynamics of an actual culture system. This improved method for determining the mass of hairy roots was successfully utilized in a fed-batch culture system.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.341-352
• /
• 2017

Butyl acetate is produced from acetic acid and butanol via an esterification reaction in a reactive distillation column. Entrainer can be used for efficient removal of produced water from the reaction region, leading to significant improvement of the column performance. Batch reactive distillation has clear advantages over continuous one in terms of flexibility and adaptability in a small plant. We studied batch and semi-batch reactive distillation processes through process simulation and pilot-scale experiments. We investigated process configuration and type of entrainer for improvement of the column performance and suggested a novel cyclic operation strategy using the semi-batch reactive distillation column. The cyclic strategy was shown to give relatively high production rate and stable operation.

• 한국도로학회:학술대회논문집
• /
• 2008.10a
• /
• pp.395-399
• /
• 2008

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.385-393
• /
• 2019

Potential fire, explosion and safety hazards exist in medium- or small-scale chemical plants using radical batch reaction processes due to the various conditions of materials, works or products. To minimize the potential damage, a study was conducted on qualitative hazard analysis using the HAZOP technique, which is a typical method for a qualitative risk assessment and analysis of the potential risks encountered in these chemical plants. For this purpose, a domestic chemical plant, which produces the acrylic resin by a radical batch reaction process, was selected and a risk assessment and analysis according to the procedure of HAZOP method was performed for the process. As the result of the study, to prevent the hazard, the input of inert gas and the installation of a pressure gauge were indispensable. In addition, the initiator and monomer should also be separated, and inhibiting substances and equipment are also necessary to prevent a runaway reaction.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.5
• /
• pp.426-432
• /
• 2000

A novel mixed-integer linear programming model for the short-term scheduling of a sequential multipurpose batch plant is addressed. First, a time slot domain to each unit is introduced. By assigning each time slot to a product, we obtain the production sequence that minimizes makespan. For multiple-unit assignment problem where a few parallel units with the same function exist, production paths are defined for the distinction of the same stage with a different unit. As a second issue, the model adapted for sequence dependent changeover is presented. For a time slot of a unit, if a product is assigned to the time slot and a different product is assigned to the adjacent time slot, the changeover time considering this situation is included. The performance of the proposed models are illustrated through two examples.

• Microbiology and Biotechnology Letters
• /
• v.3 no.2
• /
• pp.89-93
• /
• 1975

In order to ferment beer more effectively under conditions similar to the conventional batch fermentation, a part of the wort which had been fermenting for three days was replaced with un-pitched fresh wort and completed the rest of the fermentation in four to six days. The taste test panel accepted the beers fermented for five days after diluting with one third or one half volume of freshl wort giving fermentation efficiency gains by 22％ or 28％ over the regular nine-day batch fermentation respectively.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.4
• /
• pp.429-437
• /
• 2007

This study aims to develop a sulfur-using denitrification process which is possible a renovation to advanced treatment plant submerging a simple module in activated sludge aeration tank. At first, the impact factor of sulfur-using denitrification was appreciated by the batch test. Secondly, reflecting a dissolved oxygen effect of sulfur-using denitrification that was confirmed by the batch test, in a continuous nitrification/sulfur-using denitrification, high-rate nitrogen removal reaction was induced at optimum condition controlling DO concentration according to phases. Also, inside and outside of sulfur-using denitrification module was covered with microfilter and the module was considered as an alternative of clarifier. Result of batch test for sulfur-using denitrification, $NO_2{^-}N$ was lower for consumption of alkalinity and sulfur than that of $NO_3{^-}-N$. These results revealed the accordance of theoretical prediction. In continuous nitrification/sulfur-using denitrification experiment, actual wastewater was used as a influent, and influent nitrogen loading rates were increased 0.04, 0.07, 0.11, $0.14kg\;N/m^3-day$ by changing hydraulic retention times. At this time, nitrogen loading rates of packed sulfur were increased 0.23, 0.46, 0.69, $0.93kg\;N/m^3-day$. As a result, nitrification efficiency was about 100% and denitrification efficiency was 93, 81, 79, 72%. Accordingly, nitrogen removal was a high-rate. Also the module of sulfur-using denitrification covered with microfilter did not make a fouling phenomena according to increased flux. And the module was achieved effluent suspended solids of below 10 mg/L without a clarifier. In conclusion, it is possible a renovation to advanced treatment plant submerging a simple module packed sulfur in activated sludge aeration tank of traditional facilities. And the plant used the module packed sulfur is expected as a effective facilities of high-rate and the smallest.

• Journal of Environmental Science International
• /
• v.6 no.6
• /
• pp.697-709
• /
• 1997

Sequencing Batch Reactor(SBR) experiments for organics and nutrients removal have been conducted to find an optimum anaerobic/anoxic/aerobic cycling time and evaluate the applicability of oxidation-reduction potential(ORP) as a process control parameter. In this study, a 61 bench-scale plant was used and fed with night-soil wastewater in K city which contained TCODcr : 10, 680 mg/l, TBm : 6, 893 mg/l, $NH_4^+-N$ : 1, 609 mg/l, $PO_4^{3-}-P$ : 602 mg/l on average. The cycling time In SBRs was adjusted at 12 hours and 24 hours, and then certainly included anaerobic, aerobic and inoxic conditions. Also, for each cycling time, we performed 3 series of experiment simultaneously which was set up 10 days, 20 days and 30 days as SRT From the experimental results, the optimum cycling time for biological nutrient removal with nlght-soil wastewater was respctively 3hrs, 5hrs, 3hrs(anaerobic-aerobic-anoxic), Nitrogen removal efficiency was 77.9%, 77.9%, 81.7% for each SRT, respectively. When external carbon source was fed in the anoxic phase, ORP-bending point indicating nitrate break point appeared clearly and nitrogen removal efficiency increased as 96.5%, 97.1%, 98.9%. Phosphate removal efficiency was 59.8%, 64.571, 68.6% for each SRT. Also, we finded the applicability of ORP as a process control parameter in SBRs.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.4
• /
• pp.687-691
• /
• 2002

To enhance the production of flavonoids [baicalin, wogonin-7-Ο-glucuronic acid (GA)], which are secondary metabolites of Scutellaria baicalensis Georgi(G.) plant cells, a multilayer perceptron control system was applied to regulate the substrate feeding in a fed-batch cultivation. The optimal profile for the substrate feeding rate in a fed-batch culture of S. baicalensis G. was determined by simulating a kinetic model using a genetic algorithm. Process variable profiles were then prepared for the construction of a multilayer perceptron controller that included massive parallelism, trainability, and fault tolerance. An error back-propagation algorithm was applied to train the multiplayer perceptron. The experimental results showed that neurocontrol incorporated with a genetic algorithm improved the flavonoid production compared with a simple fuzzy logic control system. Furthermore, the specific production yield and flavonoid productivity also increased.

• Preventive Nutrition and Food Science
• /
• v.6 no.4
• /
• pp.206-210
• /
• 2001

Starch is an abundant resource in plant biomass, and it should be hydrolyzed enzymatically into fermentable sugars for ethanol fermentation. A genetic recombinant yeast, Saccharomyces cerevisiae GA-7458, was constructed by integrating the structural gene of both $\alpha$-amylase from Bacillus stearothermophilus and the gene (STA1) encoding glucoamylase from S. diastaticus into the chromosome of S. cerevisiae SH7458. The recombinant yeast showed active enzymatic activities of $\alpha$-amylase and glucoamylase. The productivity of ethanol fermentation from the pH-controlled batch culture (pH 5.5) was 2.6 times greater than that of the pH-uncontrolled batch culture. Moreover, in a fed-batch culture, more ethanol was produced (13.2 g/L), and the production yield was 0.38 with 2% of corn starch. Importantly, the integrated plasmids were fully maintained during ethanol fermentation.