• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.1
• /
• pp.94-100
• /
• 2000

This study was carried out to understand the present status of the quality evaluation capability of domestic fine paper industry. Six light weight coated papers and one wood containing printing and writing paper with similar basis weights were produced by seven paper companies and their properties were evaluated at four different testing laboratories of domestic fine paper mills. Paper properties including basis weight , thickness , tensile, tear , brightness , opacity, etc were examined , and the repeat ability and reproducibility of the test results were analyzed. Results showed that repeatability of the measurements within the laboratory was satisfactory . Reproducibility of the measurements between laboratories, however, was not satisfactory. This showed that strict implementation of the standard testing methods and periodic calibration of testing equipments should be made to improve quality evaluation capability of domestic fine paper industry.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.1
• /
• pp.1-9
• /
• 2015

Wood fibers for medium density fiberboard (MDF) was used in the filler layer of the white duplex board for increasing thickness and bulk of the board. The MDF fibers were treated with ozone (3% based on dry weight of the fibers), and mixed together with OCC (old corrugated container) to form paper. Ozone-treated MDF fibers gave high bulk, high tensile strength, high internal bond and fast drainage to the furnish mixed with OCC. It was shown that there were possibilities to reduced basis weight of the filler layer without loss of thickness, stiffness, and tensile strength. Furthermore, it showed the possibility to develop a new kind of board product that has high stiffness as well as high strength properties with light basis weight by application of the ozone-treated MDF fibers.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.1-10
• /
• 2011

Proportional.Integral.Derivative control schemes continue to provide the simplest and effective solutions to most of the control engineering applications today. However PID controller is poorly tuned in practice with most of the tuning done manually which is difficult and time consuming. This research comes up with a soft computing approach involving Genetic Algorithm, Evolutionary Programming, and Particle Swarm Optimization and Ant colony optimization. The proposed algorithm is used to tune the PID parameters and its performance has been compared with the conventional methods like Ziegler Nichols and Lambda method. The results obtained reflect that use of heuristic algorithm based controller improves the performance of process in terms of time domain specifications, set point tracking, and regulatory changes and also provides an optimum stability. This research addresses comparison of tuning of the PID controller using soft computing techniques on Machine Direction of basics weight control in pulp and paper industry. Compared to other conventional PID tuning methods, the result shows that better performance can be achieved with the soft computing based tuning method. The ability of the designed controller, in terms of tracking set point, is also compared and simulation results are shown.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.6
• /
• pp.768-774
• /
• 2016

The present study investigated the impact of parity 1 gilt body weight during late gestation (d 109) on subsequent reproductive performance of sows and performance of suckling pigs. A total of 2,404 farrowing records over 6 parities were divided into six groups on the basis of body weight (190, 200, 210, 220, 230, and 240 kg) at d 109 of gestation of 585 gilts. Significant effects (p<0.05) of body weight on sow retention rate was noticed, with the 210 kg group having the lowest culling rate and highest total number of piglets born alive over the 6 parities. With increase of body weight, a linear increase (p<0.05) in losses of body weight and backfat during the lactation period of parity 1 and a linear decrease (p<0.05) in backfat loss for parities 4 and 6 were found. Compared with light sows, heavy sows had higher (p<0.05) litter weight at birth for parities 1 and 2 and at weaning in parity 1. Sow weaning-to-estrus interval of sows was not influenced (p>0.05) by body weight. In conclusion, maintaining optimal body weight during gestation would be beneficial to sows and suckling piglets.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.850-852
• /
• 2004

The usable output of glassware formation production line depends, among other factors, on the weight and shape of a lump of hot molten glass called a gob. In this paper, an automated image processing system for monitoring gob weight and shape on a production line is proposed. Present techniques often rely on manual weighing of gobs on a sample basis by manually controlling the gob feeder. The proposed automated image monitoring system checks the weight and shape of every free-falling gob before it reaches the mould. In this system, the estimated weight of the gob is sufficiently close to its actual weight.

• Herbal Formula Science
• /
• v.23 no.1
• /
• pp.77-89
• /
• 2015

Objectives : This Study aims to extract the actual prescriptions used frequently in the clinical settings and the frequently used prescription list of textbook on herbal formulae by comparing the prescriptions recorded in the textbook on herbal formulae, and to examine the range of the efficacies of the corresponding prescription on the basis of the records of the Electronic Medical Record (EMR). Methods : By making comparison of the herb weight ratios of the prescriptions recorded in the textbook on herbal formulae with those recorded in EMR, the frequency is measured on the basis of the textbook on herbal formulae prescription and the frequency indication is computed for the clinical prescriptions with lower level of differences. Results & Conclusions : On the basis of the details of the clinical prescriptions used at the P Hospital, Yugmijihwang-tang, Samlyeongbaegchul-san, Jugyeobseoggo-tang, Maegmundong-tang, Olyeong-san and Baegho-tang, among the similar prescriptions for which the title prescriptions of the textbook on herbal formulae and the herbal composition coincide by more than 80%, are not included in the list of prescriptions covered under the national health insurance system even though they are frequently used prescriptions.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.2
• /
• pp.76-82
• /
• 1997

In paper the evenness of planar distribution of mass in a small scale is called formation (orbetter:mass formation). Traditionally formation has been assessed visually, by looking the sheet of paper against transmitted light. Different kinds of optieal testers are being usd to obtain quantitative rankings htat would be independent of the observer but would well correspond to the visual assessment. However, various raw-material and process factors do influence light trans-mittance in paper and do impair the correspondence between basis weight and the optical formation measurement (or visual assessment). As the optical formation test methods do not incorporate an efficient calib ration routine, the formation of the sophisticated paper grades of today the is rather difficult to measure optically and may lead to erroneous results. It may be concluded that the optical measurement is not suitable for paper grades with high filler content. coating, heavy calendering or that are made of heavily beaten pulp, nordoes it apply for dyed or printed papers. For this reason, visual assessment and optical evaluation shoild be replaced with a measurement that gives reliable results independent on paper grode and manufacturing process. Formation measuremend based on beta radiation is suitable for all paper grades regardless to the material contents or process treatment. It is possible to measure even dyed or printed samples. Thonks to a sim ple and relioble calibration, the results are converted to real basis weight balues that remain reliable even with time. The only beta tester commercially available is the AMBERTEC Beta Formation Tester. Formation of paper does vary locally in the web. Typically there exists a formation profile, too similarly to other properties of paper. Therefore, formation should ？ ays be expressed as a mean of a sufficient amount of parallel determinations. All formation measurements should be calibrated against basis weight.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.2
• /
• pp.211-215
• /
• 1983

Thirty eight varieties with high uniformity and clearance in grain quality among 70 colored soybeans collected from nation-wide provinces were investigated for their seed morphological and agronomic traits. As for seed morphological traits, grain volumetric size, grain weight, grain length, grain thickness, . hilum length and width were studied on the tendency of statistical dispersion and variations. As a result, four groups could be classified on the basis of 100 grains weight, so as small, medium, large, and super large groups, Also, as for agronomic traits, among others, the tendency of setting in flowering date, maturing date, yield components, and stem weight, stem length were studied on the basis of statistical inter-relationships between above mentioned characteristics. From the above, bigger variations were detected in weighing characters of soybean plants than in duration characters. And the flowering and maturing days showed significant relationships to the stem length, stem weight, also stem length and stem weight to the grain yield.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.3
• /
• pp.38-45
• /
• 1998

Soil and water contamination caused by the abundant use of agricultural chemicals including herbicides and fertilizers draws public concerns since these chemicals may pollute the agricultural lands as well as the food products grown on these lands. As a method to reduce the use of agricultural chemicals mulching with thin plastic film has been commonly practised for many years. Although use of the plastic film for mulching is very effective in preventing the growth of weed, it is almost impossible to remove all of the plastic film from the agricultural land and the remaining film eventually contaminates the soils. Therefore, it is very imperative to develop a mulching material that decomposes completely to prevent soil pollution problems and to enhance the competitive edge of domestic agriculture. Mulch papers are believed to have many positive characteristics in preventing problems caused by the plastic mulch film since it decomposes completely after use. However, the basis weight of mulch papers needs to be reduced to improve its handling properties and to reduce the raw material costs of pulps. In this paper the possibilities of using domestic old corrugated containers in producing mulch papers were examined. Also use of unbleached softwood kraft pulps and dry strength additives were exploited along with two-layered sheet forming technology in decreasing the basis weight of the mulch paper. Results showed that reduction of 20g/$m^2$ of basis weight of mulch paper was possible by the appropriate raw material selection and application of strength resin. To use the mulch papers in paddy fields, however, further research to improve its durability should be pursued.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.5
• /
• pp.634-643
• /
• 2007

This study was performed to develop a tailored multi-disciplinary obesity management program, as well as an obesity assessment sheet identified the general characteristics and psychological and environmental factors related to weight loss success for obese premenopausal women participating in obesity management programs performed at weight reduction health centers. The results are as follows. The primary general characteristics related to successful weight reduction in the obesity management programs were education level, occupational status, reason for obesity onset, aids used in weight control, basis of frequency, and reason for weight reduction. The initial psychological factors related to successful weight reduction were less stress and disordered eating. The initial environmental factors included an expression of ones opinion and the eating environment. Animal protein and animal fat consumption were significantly less in the unsuccessful group than in those who were unsuccessful at weight loss. The consumption of crude fiber was significantly greater in the successful group than in the unsuccessful group. Psychological factors such as stress, depression, and disordered eating, and the environmental factor of eating environment were significantly better in the successful group than in the unsuccessful group. In conclusion, we have found evidence to suggest what is required in determining the types of programs most suitable for obese women prior to starting an obesity management program.