• Journal of Microbiology and Biotechnology
• /
• v.14 no.2
• /
• pp.237-242
• /
• 2004

Cell growth and the production of pullulan by Aureobasidium pullulan HP-2001, the UV-induced mutant of A pullulans ATCC 42023, increased with increased concentration of glucose up to 15.0% (w/v). Maximal production of pullulan in the flask scale was 27.65 g/l, when concentrations of glucose and yeast extract were 15.0 and 0.25% (w/v), respectively. Maximal conversion rate of pullulan from glucose as the carbon source was 0.37, when those of glucose and yeast extract were 5.0 and 0.15% (w/v), respectively. On the basis of total amount of pullulan, the conversion rate of pullulan from glucose, and utilization rate of glucose to cell mass and pullulan by A. pullulans HP-2001, the optimal concentrations of glucose and yeast extract for the mass production of pullulan were determined to be 10.0 and 0.25% (w/v), respectively, at which concentrations the production of pullulan and its conversion rate were 27.14 g/l and 0.27, respectively. Maximal production of pullulan with optimized concentrations of carbon and nitrogen sources by A. pullulans HP-200l in a 7-1 bioreactor was 32.12 g/l for 72 h culture, and that in a 100-1 bioreactor with the inner pressure of $0.4 kgf/cm^2$ was 36.87 g/l. Increased inner pressure of a 100-1 bioreactor resulted in a higher concentration of dissolved oxygen in the medium, which might enhance the production of pullulan by A. pullulans HP-2001.

• Journal of Radiation Protection and Research
• /
• v.13 no.2
• /
• pp.29-40
• /
• 1988

A spectrum-exposure rate conversion operator G(E) for a portable HPGe detector used for field environmental radiation survey was theoretically developed on the basis of a space distribution function of gamma flux emitted from a disk source and an areal efficiency of the detector. The radiation exposure rates measured using this G(E) and the portable HPGe. detector connected to a portable multichannel analyzer were compared with those measured by a 3' ${\phi}\;{\times}$3' NaI(Tl) scintillation detector with the reported G(E) and a pressurized ionization chamber. A comparison of the three results showed that the result obtained using the HPGe detector was lower than those determined using the NaI(Tl) detector and ionization chamber by 17% to 29%, The difference obtained is close to that reported in literature. The method developed here can be easily applicable to obtain a G(E) factor suitable to any detector for detecting the exposure rate of environmental gamma radiation, since the spectrum-exposure rate conversion operator can be calculated by a hand calculator.

• The Korean Society of Law and Medicine
• /
• v.15 no.2
• /
• pp.123-163
• /
• 2014

As results of analyzing judicial precedents about infection in hospitals in connection with mistakes and causality in medical litigations shows that the Mitigation of Law Principles To Prove responsibility in medical litigation has not been able to play its role compared to its intended purposes. And Major sentiment from those judgments is that a mistake can't be proved only by the fact that certain infection in hospital occurred in connection with hospital infection. Therefore, the number of indirect facts to deny estimation is overwhelmingly high. Like this, especially for hospital infection which is difficult to prove indirect facts themselves to estimate mistake, major sentiment from those judgments have a problem that impute sharing of losses caused by hospital infection to patient. In accordance with the Principles of equitable and proper sharing of losses, it's required to prepare legal interpretation and theoretical methods to largely mitigate patient's responsibility to prove medical mistakes compared to other medical litigations in connection with existing Mitigation of Law Principles To Prove responsibility and conventional theory of estimation. In connection with this, the results of review that duty of safety management in hospital infection cases can be the base of conversion of proving responsibility, the duty that prevent hospital infection, corresponding the duty of safety management in hospital infection is not conventional duty of safety management based on duty of good faith but secondary obligation of medical contract. The breach of duty preventing hospital infection is the violation of medical contract, but there is no logical necessity that convert proving responsibility from the obligation of contract itself. Therefore, the duty of preventing hospital infection from the obligation of medical contract, corresponding the duty of safety management in hospital infection cases cannot be the base of conversion of proving responsibility alone. But, it's still required to conversion of proving responsibility in hospital infection, we need further studies on cases of Germany which applies legal estimation of proving responsibilities in hospital infection.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 1998.11a
• /
• pp.0-0
• /
• 1998

-Part I- As market needs become more various, the production of smaller quantities of a wider variety of products becomes increasingly important. In addition, in order to meet demands for more efficient production, long-term unmanned factory operation is prevailing at a remarkable pace. Within this context, laser machines are gaining increasing popularity for use in applications such as cutting and welding metallic and ceramic materials. FANUC supplies four models of $CO_2$ laser oscillators with laser power ranging from 1.5㎾ to 6㎾ on an OEM basis to machine tool builders. However, FANUC has been requested to produce laser oscillators that allow more compact and lower-cost laser machines to be built. To meet such demands, FANUC has developed six models of Slab type YAG laser oscillators with output power ranging from 150W to 2㎾. These oscillators are designed mainly fur cutting and welding sheet metals. The oscillator has an exceptionally superior laser beam quality compared to conventional YAG laser oscillators, thus providing significantly improved machining capability. In addition, the laser beam of the oscillator can be efficiently transmitted through quartz optical fibers, enabling laser machines to be simplified and made more compact. This paper introduces the features of FANUC’s developed Slab type YAG laser oscillators and their applications. - Part II - All-solid-state lasers employing laser diodes (LD) as a source of pumping solid-state laser feature high efficiency, compactness, and high reliability. Thus, they are expected to provide a new generation of processing tools in various fields, especially in automobile and aircraft industries where great hopes are being placed on laser welding technology for steel plates and aluminum materials for which a significant growth in demand is expected. Also, in power plants, it is hoped that reliability and safety will be improved by using the laser welding technology. As in the above, the advent of high-power all-solid-state lasers may not only bring a great technological innovation to existing industry, but also create new industry. This is the background for this project, which has set its sights on the development of high-power, all-solid-state lasers with an average output of over 10㎾, an oscillation efficiency of over 20%, and a laser head volume of below 0.05㎥. FANUC Ltd. is responsible for the research and development of slab type lasers, and TOSHIBA Corp. far rod type lasers. By pumping slab type Nd: YAG crystal and by using quasi-continuous wave (QCW) type LD stacks, FANUC has already obtained an average output power of 1.7㎾, an optical conversion efficiency of 42%, and an electro-optical conversion efficiency of 16%. These conversion efficiencies are the best results the world has ever seen in the field of high-power all-solid-state lasers. TOSHIBA Corp. has also obtained an output power of 1.2㎾, an optical conversion efficiency of 30％, and an electro-optical conversion efficiency of 12%, by pumping the rod type Nd: YAG crystal by continuous wave (CW) type LD stacks. The laser power achieved by TOSHIBA Corp. is also a new world record in the field of rod type all-solid-state lasers. This report provides details of the above results and some information on future development plans.

• Ocean Science Journal
• /
• v.41 no.2
• /
• pp.97-104
• /
• 2006

A useful radiance-converting method was developed to convert the Landsat-7 ETM+thermal-infrared (TIR) band's radiance ($L_{{\lambda},L7/ETM+}$) to that of Landsat-5 TM TIR ($L_{{\lambda},L5/TM+})$ as: $L_{{\lambda},L5/TM}=0.9699{\times}L_{{\lambda},L7/ETM+}+0.1074\;(R^2=1)$. In addition, based on the radiance-converting equation and the linear relation between digital number (DN) and at-satellite radiance, a DN-converting equation can be established to convert DN value of the TIR band between Landsat-5 and Landsat-7. Via this method, it is easy to integrate Landsat-5 and Landsat-7 TIR data to retrieve the sea surface temperature (SST) in coastal waters on the basis of local empirical algorithms in which the radiance or DN of Lansat-5 and 7 TIR band is usually the only input independent variable. The method was employed in a local empirical algorithm in Daya Bay, China, to detect the thermal pollution of cooling water discharge from the Daya Bay nuclear power station (DNPS). This work demonstrates that radiance conversion is an effective approach to integration of Landsat-5 and Landsat-7 data in the process of a SST retrieval which is based on local empirical algorithms.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.2
• /
• pp.233-243
• /
• 1999

Food safety or sanitation are terms broadly applicable to procedures designed to ensure that food quality is high and free of factors which may adversely affect human health. These factors include zoonotic diseases and acute and chronic effects of ingesting natural and human-made xenobiotics. Use of drugs in animal production for the treatment and control of animal diseases, to promote growth rate, and to improve feed conversion efficiency has expanded year by year, thus increasing the possibilities for occurrences in animal products of residues harmful to humans. Governmental agencies have made efforts to control or prevent residue problems. The Korean Food and Drug Administration (KFDA) is charged with the responsibility of establishing tolerances for veterinary drugs, pesticides, and mycotoxins and other non-pharmaceutical substances. The Department of Veterinary Service is responsible for establishing guidelines regarding withdrawal times of drugs, approval of drugs, their uses, and sanitation enforcement of livestock products. The authors describe the toxicological basis for the establishment of tolerance levels for xenobiotics and the pharmacokinetic basis for establishing withdrawal time for veterinary drugs. The regulatory tolerance levels of chemicals in pork and swine feed, Korean regulations on the use of feed additives, rapid residue test methods, the National Residue Program, and the Food Animal Residue Avoidance Databank are discussed. Rapid EIA methods that are under development for the screening of live animals are described These methods predict tissue residues from an examination of blood samples taken from pigs before they are slaughtered.

• Journal of Integrative Natural Science
• /
• v.3 no.4
• /
• pp.231-236
• /
• 2010

Partial charge is an important and fundamental concept which can explain many aspects of chemistry. Since a molecule can be regarded as neclei surrounded by electron cloud, there is no way to define a partial charge accurately. Nevertheless, there have been many attempts to define these seemingly impossible parameters, since they would facilitate the understanding of molecular properties such as molecular dipole moment, solvation, hydrogen bonding, molecular spectroscopy, chemical reaction, etc. Common methods are based on the charge equalization, orbital occupancy, charge density, and electric multipole moments, and electrostatic potential fitting. Methods based on the charge equalization using electronegativity are very fast, and therefore they have been used to study many compounds. Methods to subdivide orbital occupancy using basis set conversion, relies on the notion that molecular orbitals are composed of atomic orbitals. The main idea is to reduce overlap integral between two nuclei using converted orthogonal basis sets. Using some quantum mechanical observables like electrostatic potential or charge multipole moments. Using potential grids obtained from wavefunction, partial charges can be fitted. these charges are most useful to describe intermolecular electrostatic interactions. Methods to using dipole moment and its derivatives, seems to be sensitive the level of theory, Dividing electron density using density gradient being the most rigorous theoretically among various schemes, bears best potential to describe the charge the most adequately in the future.

• Journal of Power Electronics
• /
• v.2 no.4
• /
• pp.288-296
• /
• 2002

In this paper, a high frequency transformer - assisted auxiliary active resonant commutated snubber (HFTA-ARCS) for voltage source soft switching pulse width modulated power conversion circuits is presented. A three phase voltage source type soft switching inverter incorporating HFTA-ARCS circuits in its three bridge legs can reduce current rating of auxiliary active power switches and has sensorless simplified control scheme which any specified boost current management is not required for soft switching. Its operation principle and digital control scheme are described and a practical design method of circuit parameters on this HFTA-ARCS circuit is also introduced on the basis of computer simulation. Moreover, this space voltage vector modulated soft switching inverter system with DSP-based digital control scheme Is discussed and its effectiveness is proved on the basis of performance evaluations. The operating performances of this inverter system are also compared with those of conventional three-phase hard switching inverter under practical conditions of specified parameters.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.216-221
• /
• 2008

Shape design optimization for linear elasticity problem is performed using isogeometric analysis method. In many design optimization problems for real engineering models, initial raw data usually comes from CAD modeler. Then designer should convert this CAD data into finite element mesh data because conventional design optimization tools are generally based on finite element analysis. During this conversion there is some numerical error due to a geometry approximation, which causes accuracy problems in not only response analysis but also design sensitivity analysis. As a remedy of this phenomenon, the isogeometric analysis method is one of the promising approaches of shape design optimization. The main idea of isogeometric analysis is that the basis functions used in analysis is exactly same as ones which represent the geometry, and this geometrically exact model can be used shape sensitivity analysis and design optimization as well. In shape design sensitivity point of view, precise shape sensitivity is very essential for gradient-based optimization. In conventional finite element based optimization, higher order information such as normal vector and curvature term is inaccurate or even missing due to the use of linear interpolation functions. On the other hands, B-spline basis functions have sufficient continuity and their derivatives are smooth enough. Therefore normal vector and curvature terms can be exactly evaluated, which eventually yields precise optimal shapes. In this article, isogeometric analysis method is utilized for the shape design optimization. By virtue of B-spline basis function, an exact geometry can be handled without finite element meshes. Moreover, initial CAD data are used throughout the optimization process, including response analysis, shape sensitivity analysis, design parameterization and shape optimization, without subsequent communication with CAD description.

• Journal of Educational Research in Mathematics
• /
• v.17 no.1
• /
• pp.1-31
• /
• 2007

Negative numbers have been one of the most difficult mathematical concepts, and it was only 200 years ago that they were recognized as a real object of mathematics by mathematicians. It was because it took more than 1500 years for human beings to overcome the quantitative notion of numbers and recognize the formality in negative numbers. Understanding negative numbers as formal ones resulted from the Copernican conversion in mathematical way of thinking. we first investigated the historic and the genetic process of the concept of negative numbers. Second, we analyzed the conceptual fields of negative numbers in the aspect of the additive and multiplicative structure. Third, we inquired into the levels of thinking on the concept of negative numbers on the basis of the historical and the psychological analysis in order to understand the formal concept of negative numbers. Fourth, we analyzed Korean mathematics textbooks on the basis of the thinking levels of the concept of negative numbers. Fifth, we investigated and analysed the levels of students' understanding of the concept of negative numbers. Sixth, we analyzed the symbolizing process in the development of mathematical concept. Futhermore, we tried to show a concrete way to teach the formality of the negative numbers concepts on the basis of such theoretical analyses.