• Title/Summary/Keyword: basic level

Search Result 5,968, Processing Time 0.042 seconds

Monitoring of Residual Pesticides and Exposure Assessment of Olive Oil Products Sold on the Market (올리브유의 잔류농약 모니터링 및 노출량 조사)

  • Mi-Hui Son;Jae-Kwan Kim;You-Jin Lee;Ji-Eun Kim;Eun-Jin Baek;Byeong-Tae Kim;Seong-Nam Lee;Myoung-Ki Park;Yong-Bae Park
    • Journal of Food Hygiene and Safety
    • /
    • v.38 no.4
    • /
    • pp.211-216
    • /
    • 2023
  • A total of 100 commercially available olive oil products were analyzed for 179 pesticide residues using gas chromatography-tandem mass spectrometry (GC/MS/MS). The olive oil samples were mixed with organic solvents, centrifuged and frozen to remove fat, and pesticide residues were analyzed using the "quick, easy, cheap, effective, rugged, and safe" (QuEChERS) method. The determination coefficient (R2) of the analysis method used in this study was ≥0.998. The detection limit of the method ranged 0.004-0.006 mg/kg and its quantitative limit ranged 0.012-0.017 mg/kg. The recovery rate (n=5) measured at the level ranging 0.01-0.02, 0.1, and 0.5 mg/kg ranged 66.8-119.5%. The relative standard deviation (RSD) was determined to be ≤5.7%, confirming that this method was suitable for the "Guidelines for Standard Procedures for Preparing Food Test Methods". The results showed that a total of 151 pesticides (including difenoconazole, deltamethrin, oxyfluorfen, kresoxim-methyl, phosmet, pyrimethanil, tebuconazole, and trifloxystrobin) were detected in 64 of the 100 olive oil products. The detection range of these pesticide residues was 0.01-0.30 mg/kg. The percentage acceptable daily intake (%ADI) of the pesticides calculated using ADI and estimated daily intake (EDI) was 0.0001-0.1346, indicating that the detected pesticides were present at safe levels. This study provides basic data for securing the safety of olive oil products by monitoring pesticide residues in commercially available oilve oil products. Collectively, the analysis method used in this study can be used as a method to analyze residual pesticides in edible oils.

A Study on the Current State of Pediatric Dentists and the Adequacy of Supply and Demand Based on Covered Services (소아치과 전문의 인력 현황 및 공급 적정성에 관한 연구 - 급여 진료 항목을 기준으로)

  • Yeo Won Lim;Yong Kwon Chae;Ko Eun Lee;Ok Hyung Nam;Hyoseol Lee;Sung Chul Choi;Mi Sun Kim
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.50 no.3
    • /
    • pp.360-372
    • /
    • 2023
  • The aim of this study was to identify the current state of pediatric dentists, evaluate the adequacy of pediatric dentist supply and demand, and find out the perception of all pediatric dentists on the current state of pediatric dentists and policy establishment. An Online survey was conducted among pediatric dentists. The questionnaire was subdivided into 'general characteristics', 'number of dental treatments and working days per year', 'proportion of covered services', 'perceptions of supply and demand of pediatric dentists'. Through the Korean Academy of Pediatric Dentistry, the Health Insurance Review and Assessment Services, the National Health Insurance Service (NHIS), and the Korean Statistical Information Service, the current state of pediatric dentists, the number of claims for covered services, and the decrease in births per year were investigated. Dental clinics claiming to be pediatric dentistry reached half of all medical institutions, but only 3.78% of pediatric dentists actually worked. 61.36% of all pediatric dentists were concentrated in the metropolitan area, showing a national imbalance. Although the population of children and adolescents have continuously decreased over the past 20 years, the number of NHIS-covered services has shown a continuous increase. Over the past 10 years, the optimal supply of pediatric dentists has been maintained at around 4,000. According to the analysis, 92.15% of pediatric dentists thought that it was necessary to prepare policies and support measures at the government level. This study is expected to be used as basic data for establishing a demand estimation method for pediatric dentistry specialists in the future.

Developing Content System for Home Economics Curriculum in Connection with Education for Sustainable Development(ESD): Focusing on the 'Life Environment and Sustainable Choice' Area (지속가능발전교육(ESD)을 연계한 가정과 교육과정의 내용체계 개발: '생활환경과 지속가능한 선택' 영역)

  • Yoon, So Hee;Sohn, Sang-Hee;Lee, Soo-Hee
    • Journal of Korean Home Economics Education Association
    • /
    • v.35 no.2
    • /
    • pp.145-161
    • /
    • 2023
  • The purpose of this study is to develop a content system for the home economics curriculum that integrates Education for Sustainable Development(ESD) and provides basic material for ESD implementation in schools. In view of this, the content elements of the revised home economics curriculum for 2022 were analyzed, and a content system for the home economics curriculum, linked to ESD, was proposed based on the implications drawn from the analysis. The results are as follows. First, the three components of competencies, namely knowledge, values, and skills, were organized equally as a whole. However, the association between the content elements and key competencies in sustainability was found to be insufficient. Consequently, it is proposed that key competencies in sustainability should be cultivated integrally. Second, no content element was identified that can promote social participation. Therefore, it is proposed that solutions should be dealt with at the level of social participation. Third, the connection with Sustainable Development Goals(SDGs) was observed in only six of the 28 content elements. Wherever relevant, it is proposed to incorporate key issues related to SDGs. Fourth, the analysis confirmed that only the environmental dimension of sustainable development was considered. Therefore, it is proposed to pursue coexistence based on temporal and spatial relationship and consider the dimensions of environment, society, and economy in an integrated manner.

The Satisfaction Analysis of Suburban Rural Human Settlements in Henan Province, China -Focused on Tai Nan Village - (중국 허난성(河南省) 도시 근교형 농촌 거주환경 만족도 분석 - 태남마을(太南村)을 중심으로 -)

  • Hou, ShuJun;Jung, Teayeol
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.51 no.1
    • /
    • pp.72-84
    • /
    • 2023
  • The Rural Revitalization Strategy (2018-2022), published by the Chinese State Council in 2018, represents a new period of rural development in China. Suburban areas are more convenient than other rural areas in integrated urban-rural development but are under greater pressure from construction and industrial pollution. As a rural area with a high proportion of rural areas, it would be valuable for Henan province to gain a comprehensive grasp of rural human settlementst while identifying problems and proposing solutions. The purpose of this study is to analyze the satisfaction of the evaluation items based on the usage status and life perception of the residents of Tai Nan village, a suburb-type rural village in Henan province. The study proposes improvement programs based on the evaluation results. As a result of the study, 24 evaluation items were derived and divided into five categories: "Living Service Facilities", "Housing Environment, "Road Environment", "Health & Ecology Environment", and "Social & Cultural Environment". The Fuzzy Comprehensive Evaluation Method was used to find the overall satisfaction level of the human living environment in Tai Nan village, which was "average", among which "Living Service Facilities" was the most important "Health & Ecology Environment" was the least satisfied. Based on these results, an improvement plan is proposed in three stages. First, the living service will be improved while strengthening the facility management of the hygiene and the ecological environment. Second, reasonable improvement of housing and the road environment will be applied. Third, programs will be introduced to cultivate residents' ability to build their own and improve the social and cultural environment. This study provides basic data for the future improvement of rural settlements in the suburban areas of Henan province and is of great significance in gradually improving the the residents' quality of life.

Benchmark Test Study of Localized Digital Streamer System (국산화 디지털 스트리머 시스템의 벤치마크 테스트 연구)

  • Jungkyun Shin;Jiho Ha;Gabseok Seo;Young-Jun Kim;Nyeonkeon Kang;Jounggyu Choi;Dongwoo Cho;Hanhui Lee;Seong-Pil Kim
    • Geophysics and Geophysical Exploration
    • /
    • v.26 no.2
    • /
    • pp.52-61
    • /
    • 2023
  • The use of ultra-high-resolution (UHR) seismic surveys to preceisly characterize coastal and shallow structures have increased recently. UHR surveys derive a spatial resolution of 3.125 m using a high-frequency source (80 Hz to 1 kHz). A digital streamer system is an essential module for acquiring high-quality UHR seismic data. Localization studies have focused on reducing purchase costs and decreasing maintenance periods. Basic performance verification and application tests of the developed streamer have been successfully carried out; however, a comparative analysis with the existing benchmark model was not conducted. In this study, we characterized data obtained by using a developed streamer and a benchmark model simultaneously. Tamhae 2 and auxiliary equipment of the Korea Institute of Geoscience and Mineral Resources were used to acquire 2D seismic data, which were analyzed from different perspectives. The data obtained using the developed streamer differed in sensitivity from that obtained using benchmark model by frequency band.However, both type of data had a very high level of similarity in the range corresponding to the central frequency band of the seismic source. However, in the low frequency band below 60 Hz, data obtained using the developed streamer showed a lower signal-to-noise ratio than that obtained using the benchmark model.This lower ratio can hinder the quality in data acquisition using low-frequency sound sources such as cluster air guns. Three causes for this difference were, and streamers developed in future will attempt to reflect on these improvements.

A Study on the Growth Change by DBH Class in Korean White Pine Plantations (잣나무 인공림의 흉고직경 등급별 생장변화에 관한 연구)

  • Jung, Sunghoon;Seo, Yeongwan;Lee, Daesung;Choi, Jungkee
    • Journal of Korean Society of Forest Science
    • /
    • v.111 no.1
    • /
    • pp.125-135
    • /
    • 2022
  • In this study, growth changes of the diameter at breast height (DBH), height, basal area, volume, and biomass of Korean white pine (Pinus koraiensis Siebold & Zucc.) on a plantation were examined via long-term monitoring. In addition, this study was performed to provide the basic data for timber production in line with DBH class by comparing the growth of the relative DBH size. Growth characteristics according to DBH class were analyzed by categorizing trees into five classes based on sorted DBH rankings: class I (1%-20%; upper 20%), class II (21%-40%), class III (41%-60%), class IV (61%-80%), class V (81%-100%; lower 20%). A total class (0%-100%) was also used. Total increment and mean annual increment (MAI) were calculated using data from nine measurements taken over 39 years. Tree characteristics based on average values and stand characteristics based on unit area per hectare were examined. According to the total increments of variables, the differences in DBH, basal area, volume, and biomass among classes I-V increased over time, whereas the height difference did not continually increase. According to MAI, the maximum DBH value was 0.92 cm·yr-1 at age 23 in class I, whereas the maximum value in all trees was 0.69 cm·yr-1 at age 17. The maximum value of height MAI for class I was 0.52 m·yr-1 at age 23, whereas that for all trees was 0.49 m·yr-1 at age 20. In terms of basal area, volume, and biomass growth at tree-and stand-level, the maximum MAI of class I and all trees was not observed during the measurement period. Therefore, additional long-term monitoring data are required to determine the maximum MAI of the variables.

Effectiveness Analysis of HOT Lane and Application Scheme for Korean Environment (HOT차로 운영에 대한 효과분석 및 국내활용방안)

  • Choi, Kee Choo;Kim, Jin Howan;Oh, Seung Hwoon
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.29 no.1D
    • /
    • pp.25-32
    • /
    • 2009
  • Currently, various types of TDM (Transportation Demand Management) policies are being studied and implemented in an attempt to overcome the limitations of supply oriented policies. In this context, this paper addressed issues of effectiveness and possible domestic implementation of the HOT lane. The possible site of implementation selected for this simulation study is part of the Kyung-bu freeway, where a dedicated bus lane is currently being operated. Minimum length of distance required in between interchanges and access points of the HOT lane for vehicles to safely enter and exit the lane, and traffic management policies for effectively managing the weaving traffic trying to enter and exit the HOT lane were presented. A 5.2km section of freeway from Ki-heuing IC to Suwon IC and a 8.3km section from Hak-uei JC to Pan-gyo JC have been selected as possible sites of implementation for the HOT lane, in which congestion occurs regularly due to the high level of travel demand. VISSIM simulation program has been used to analyze the effects of the HOT lane under the assumption that one-lane HOT lane has been put into operation in these sections and that the lane change rate were in between 5% to 30%. The results of each possible scenario have proven that overall travel speed on the general lanes have increased as well by 1.57~2.62km/h after the implementation of the HOT lane. It is meaningful that this study could serve as a basic reference data for possible follow-up studies on the HOT lane as one effective method of TDM policies. Considering that the bus travel rate would continue increase and assuming the improvement in travel speed on general lanes, similar case study can be implemented where gaps between buses on bus lane are available, as a possible alternative of efficient bus lane management policies.

Safety Evaluation of Snacks and Drinks in Circulation for Infants and Toddlers (유통 영유아용 과자류 및 음료류의 안전성 평가)

  • Jaerin Lee;Hyemin Park;Keunyoung Ryu;Keunyoung Ryu;Suyeon Choi;Eunhye Cho;Baesik Cho;Jinhee Kim
    • Journal of Food Hygiene and Safety
    • /
    • v.38 no.3
    • /
    • pp.99-111
    • /
    • 2023
  • The purpose of this study was to provide basic data for setting more detailed standards for baby food and to provide food information that can be used in real-world settings. We purchased 80 snacks and 40 drinks for infants and toddlers from supermarkets and online markets and analyzed tar color, artificial sweeteners, mycotoxins, and nutritional components (e.g., sucrose, sodium, and calcium). Fortunately, it was confirmed that both tar color and sodium saccharin, which do not have detection criteria for labeled foods for infants and toddlers, were not detected. However, acesulfame potassium was detected at 0.07 g/kg in one snack sample. As for myxotoxins, aflatoxin (B1, B2, G1, and G2) and ochratoxin A were not detected. Fumonisin B1, fumonisin B2, and zearalenone were detected in the ranges of 9.78-78.94 ㎍/kg, 5.58-11.73 ㎍/kg, and 2.96-8.83 ㎍/kg, respectively, but only in snacks. Sucrose was detected in 65 of the snacks (0.02-40.94 g/net weight [g]) and in 24 of the drinks (0.12-27.60 g/net weight [g]). Minerals were detected in most of the samples, and in four snacks, the zinc content per net exceeded the tolerable upper intake level for infants. Sixteen snacks exceeded the food standards for sodium content for infants and toddlers, but none of them were labeled as food for infants and toddlers in the product manufacturing report, such that the corresponding standards could not be applied. Therefore, it seems necessary to establish institutional improvements, such as strengthening labeling standards, so that the currently enforced standards can be appropriately applied, and establishing standards for labeled foods for infants and toddlers.

Physiological and Proteomic Responses of Barley Seedlings to Salt Stress (보리의 생육초기 염 스트레스에 따른 생리적 반응과 프로테옴 변화)

  • Kim, Dea-Wook;Yun, Seong-Kun;Park, Hyoung-Ho;Hwang, Jong-Jin;Han, Ok-Kyu;Park, Tae-Il;Jung, Gun-Ho;Lee, Jae-Eun;Kim, Sun-Lim;Chung, Young-Ho
    • Journal of the Korean Society of International Agriculture
    • /
    • v.23 no.5
    • /
    • pp.537-545
    • /
    • 2011
  • This study was conducted to obtain basic information on physiological and proteomic responses of barley seedlings to salt stress. Shoot dry weight decreased significantly as the level of soil salinity increased. Salt stress-induced decrease of relative shoot dry weight was lower in cv. "Sanglok" than in cv. "Sunwoo". Under the salt stress, SPAD value decreased, and the value was higher in cv. "Sanglok" than in cv. "Sunwoo". Sodium ion content in the leaves increased as NaCl concentration increased, and the content was higher in cv. "Sunwoo" than in cv. "Sanglok". The K+/Na+ ratio was higher in cv. "Sanglok" than in cv. "Sunwoo". Salt stress-induced alterations in protein expression of the leaves were detected by two dimensional electrophoresis, and 47 protein spots showing altered expression were selected. Among the selected protein spots, 17 protein spots were up-regulated and 28 spots down-regulated in cv. "Sanglok". In cv. "Sunwoo", 14 protein spots were up-regulated and 27 spots down-regulated. Out of 47 deferentially expressed protein spots, 18 protein spots were identified using mass spectrometry and NCBI protein database. Among the identified proteins, ten proteins are known to be involved in various stress responses, but the others are not directly involved in stress responses.

Survey on the Regular Maintenance of Agricultural Machinery (농업기계 정기점검정비 실태조사)

  • Kang, J.W;Lee, W.Y.;Lee, S.B.;Lee, J.H.
    • Journal of Practical Agriculture & Fisheries Research
    • /
    • v.3 no.1
    • /
    • pp.142-157
    • /
    • 2001
  • This study was conducted to get the basic information for promoting farm machinery productivity by surveying the regular maintenance and repair status of major farm machinery such as power tiller, farm tractor, rice transplanter and combine harvester. The survey was carried out through 9 provinces including Cheju province by direct visiting farmers with prepared questionnaire. The results of this study can be summarized as follows : 1. The average farming carrier of the surveyed farmers was 25.3 years, and 21-30 years of farming carrier showed the highest portion as 40.7%. The average carrier of using farm machinery was 9.4 years, and that was 14.9 years for power tiller, 8.3 years for farm tractor, 9.0 years for rice transplanter, 7.9 years for combine harvester, 7.5 years for mini tiller, 9.7 years for power sprayer, and 8.2 years for binder etc. 2. The regular maintenance for farm machinery was conducted mainly at repair shop (49.5%) or dealer agency (12.0%) as 61.5%, and 34.9% of farmers conducted the regular maintenance by themselves at their house. 3. The reasons for not-fully recognizing operation manual and insufficient before-, during-, after-maintenance of farm machinery were insufficient time for them (45.8%), troublesome (22.9%), unknown maintenance method (16.3%), unknown the necessity for maintenance (12.4%), and others (2.6%) in order. 4. For the annual exchange of engine oil, 3.2 times is necessary but actually 1.7 times was exchanged for power tiller, 4.3 times is necessary but actually 1.9 times was exchanged for farm tractor, 2.7 times is necessary but actually 1.7 times was exchanged for rice transplanter, 2.2 times is necessary but actually 2.3 times was exchanged combine harvester. 5. For the annual cleanness or exchange of fuel filter, 3.2 times is necessary but actually 1.1 times was done for power tiller, 4.3 times is necessary but actually 1.6 times was done for farm tractor, 2.7 times is necessary but actually 1.7 times was done for rice transplanter, 1.9 times is necessary but actually 0.8 times was done for combine harvester. 6. For the annual cleanness or exchange of air filter, 3.2 times is necessary but actually 1.4 times was done for power tiller, 4.2 times is necessary but actually 2.4 times was done for farm tractor, 2.6 times is necessary but actually 1.6 times was done for rice transplanter, 3.9 times is necessary but actually 7.0 times was done for combine harvester. 7. For the experience of breakdown related to maintenance, 5.3% of farmers experienced breakdown due to the insufficient exchange of engine oil, 7.7% of farmers experienced breakdown due to the insufficient cleanness or exchange of fuel filter, and 2.9% of farmers experienced breakdown due to the insufficient cleanness or exchange of air filter. 8. Most farmers (76.1%) recognized the necessity for agricultural machinery training or education, and most farmers preferred about one week for the training period, simple or ease maintenance for the training level, agricultural technical center or agricultural machinery manufacturer for the training agency. 9. Complete recognition of operation manual and sufficient before-, during-, and after-maintenance for farm machinery can minimize the breakdown as well as conduct suitable period farming, enlarge the endurance, prevent the safety accidents, and promote productivity of farm machinery. Therefore, these can be accomplished by the thorough training or education for agricultural machinery.