• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.783-788
• /
• 2012

Stern tube bearing is a shaft device playing important roles to reduce the friction of axial rotation and to support the weight of shaft. However, because there is no domestic producer of stern tube bering, imported stern tube bearings have many practical problems including prices, delivery and after services. This is why stern tube bearing should be localization. For the purpose of development of polyurethane resin for stern tube bearings, the effect of additives on the hardness, tensile strength and elongation of the polyurethane resin were systematically investigated. For the preliminary researches, depending on the type of curing agent, MOCA type and non-MOCA type polyurethanes were synthesized. Preliminary researches concluded that MOCA type polyurethane resin has more excellent mechanical properties than non-MPCA type for stern tube bearings that Tensile strength and Hardness of non-MOCA type investigated 23 D, 4.3 Mpa. Therefore, MOCA type polyurethane was adapted as base resin of this research. Silica, calcium carbonate and graphite were selected as additives for the enhancement of mechanical properties of polyurethane resin. Effect of the type and the dosage of these additives on the hardness, tensile strength, elongation of the polyurethane resin were experimentally examined. However, addition of calcium carbonate and graphite showed only minor effect on the hardness of the resin. Polyurethane resin with silica showed relatively excellent hardness, tensile strength and improved elongation.

• The korean journal of orthodontics
• /
• v.37 no.3 s.122
• /
• pp.192-203
• /
• 2007

Objective: The aim of this study was assessment of the relationship between airway space and facial morphology in Class III children with nasal obstruction. Methods: For this study, 100 Class III children (50 boys and 50 girls) were chosen. All subjects were refered to ENT, due to nasal obstruction. Airway space measurements and facial morphology measurements were measured on lateral cephalometric radiograph. Pearson correlation analysis was used to assess the relationship between airway space and facial morphology Results: Ramal height, SNA, SNB, PFH, FHR and facial plane angle were positively related to upper PAS, and sum of saddle angle, articular angle, and genial angle, SN-GoGn, Y-axis to SN and FMA negatively related to upper PAS. Genial angle, FMA were positively related to lower PAS, and articular angle, facial depth, PFH and FHR negatively related to lower PAS. PCBL, ramal height, Mn. body length, Mn. body length to ACBL, facial depth, facial length, PFH and AFH were positively related to tonsil size. Sum of saddle angle, articular angle, genial angle, facial length, AFH, FMA and LFH were positively related to tongue gap, and IMPA and overbite was negatively related to tongue gap. Upper PAS, related to size of adenoid tissue, was mainly related to posterior facial dimension following a vertical growth pattern of face and mandibular rotation. Lower PAS and tonsil size, related to anterior-posterior tongue base position, were significantly related to each other. Lower PAS was related to growth pattern of mandible, and tonsil size was related to size of mandible and horizontal growth pattern of face. Tongue gap was related to anterior facial dimension following a vertical growth pattern of face. Conclusion: Significant relationship exists between airway space and facial morphology.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.2
• /
• pp.242-254
• /
• 2016

This paper is the forth investigation on the evaluation methods of flow characteristics in a steady flow bench. In the previous works, it was concluded that the assumption of the solid rotation might cause serious problems and both of the eccentricity and the velocity profile distort the flow characteristics when using the ISM at 1.75B plane. Also particle image velocimetry (PIV) measurement at this position showed that the real velocity profile was far from the assumption of ISM evaluation. In this paper, the planar velocity profiles were measure from 1.75B to 6.00B position by PIV and the characteristics were examined according to the valve angles and lifts for further investigations about the effect of the position on the velocity profile. The results show that $26^{\circ}$ valve angle is always an unique exceptional case in all aspects. If the valve angle is $21^{\circ}$ and below, the planar velocity profiles according to the lift and the position are similar to each other, however, the tangential velocity curves along with the radial direction have common tendencies up to $16^{\circ}$ angle. Also the well arranged swirl behaviors are generally observed at the position above 3.00B and the velocity contour lines come closer to the concentric circle as the valve lift increases. In addition, the gradient of tangential velocity along with the radial direction from the swirl center becomes stable and constant as the position goes downstream. Concurrently the velocity gradient is larger to the eccentric direction of the center. In the meantime the tangential velocity curves along with the radial direction are irregular and various at 1.75B, however, they become regular and reach higher level as the evaluation position goes downstream. At this time the curves of 4.50B are the best fitted to the ideal one. On the other hand in an exceptional case, $26^{\circ}$, the velocity contours are very complicated over 6mm valve lift regardless the position and the gradient increases to the opposite direction of the eccentric center. Also, 6.00B is a best fitting position in the geometrical cylinder center base. With respect to the swirl center, the distribution range of centers for 1.75B is different to that for the other positions and the eccentricities of this plane are larger regardless the valve angle. After 1.75B, there is no certain tendency in the center position change according to the valve angle and lift. Additionally, the eccentricities are not sufficiently small to neglecting the effect on ISM measurement.

• 대한공업교육학회지
• /
• v.35 no.2
• /
• pp.82-111
• /
• 2010

The goal of this paper was to understand the skill-up experiences of ex-participants of the customized training program in Technical High Schools for Small and Medium Business during first 2 years in Company through qualitative interviews with 3 purposefully selected ex-participants. Their core skill-up experience in this period was assumed as the shift from' dependent worker' to 'independent worker' on the base of literature review. The results of this study were following : 1. The small and medium companies offered a few formal training for newcomers, production-site orientation through short job rotation, linking them with skilled workers and job manuals or job standards. 2. Authentic skill-up experiences were combined with a structured reprimand, peer learning, deep learning through reflection on one's own experiences. 3. There were a few handicap conditions that disturbed their skill-up activities: the skilled worker don't open their skill toward new corner; the ex-participants in company had no time to learn anything meaningful to up-grade their competency.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.1
• /
• pp.5-13
• /
• 2008

Purpose: This review article was written to investigate what kind of forces are acting on the contact lens fitted on the cornea and its subsequent motion. Methods: A capillary action-induced force develops in the tear layer between the lens and cornea, which leads to the restoring force due to difference in layer thickness according to lens rotation. The characteristics of the lens movement can be determined by the various factors such as friction between eyelid and lens, acceleration force based on blinking and the restoring force incorporated with the viscous damping force. A mathematical model which consists of the differential equations and their numerical solution was proposed to analyze the damped motion of lenses. The model predicts the time dependence of lenses during and after the blink varying the BC, blink period and eyelid pressure. Results: It was found that both the blink period and lid pressure increases the movement increases because of the enhanced lid friction. As the BC increases the viscous damping reduces due to the lacrimal layer's increase which resulted in the enhanced lens motion. After blink the lens illustrates the damped oscillation because of the restoring force by the increased lacrimal layer thickness and reduced viscous resistance. The time for the lens to return to the equilibrium shortens as the BC increase because of the resistance reduction. Conclusions: The movement of the contact lens is governed by the characteristics of the lacrimal layer between the lens and cornea as well as the lid blink.

• The korean journal of orthodontics
• /
• v.11 no.2
• /
• pp.85-100
• /
• 1981

Serial lateral cephalometric radiographs of 40 Korean children(25 males, 15 females) ranging in age from 6 to 13 years were studied by means of computer morphometrics and statistical analysis. As a result of this study, the following conclusions can be made: 1. In both sexes, the mean growth patterns of the face were very stable and the growth directions of the face were more prominent both forward and down-ward away from the cranial base(S-N). 2. In the mandible, the rotation and the 'wave-like' manner of migration were observed. 3. The size of the lateral faces in males was larger than females at 6 and 13 years of age, and the forms of the lateral faces in males were slightly more squares than females at 13 years of age. 4. The sex differences and practical means in the growth increments and growth rates during 7 years of the growth period were as follows: (1) In the total face, there was a significant sex difference in the growth increments(males $26.21cm^2$, females $23.24cm^2$) and growth rates(males $42.02\%$, females $39.28\%$). (2) In the facial surface 1, there was a significant sex difference in the growth increments(males $21.30cm^2$, females $19.19cm^2$) but there was no significant sex difference in the growth rates(males $41.35\%$, females $39.10\%$). (3) In the anterior total facial height(N-Ne), there was no significant sex difference in the growth increments(males 18.23mm, females 17.45mm) and the growth rates(males $18.44\%$, females $18.19\%$). (4) In the posterior total facial height(S-Go), there was a significant sex difference in the growth increments(males 14.61mm, females 12.98mm) but there was no significant sex difference in the growth rates(males $23.78\%$, females $22.25\%$). 5. The percentages of anterior upper facial height to anterior total facial height in both sexes were very stable in spite of the age increase. 6. The percentage of total facial height to standing height was reduced by the age increase, and the reduced rate of anterior total facial height(males $13.26\%$, females $13.75\%$) was larger than the posterior total facial height(males $9.95\%$, females $11.70\%$). 7. The correlations of lateral facial surfaces to the standing height and the weight were higher in males than females, but the level of correlation in males was in the moderate range.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.557-566
• /
• 1995

Postpubertal craniofacial growth changes were assessed from serial lateral cephalograms taken at which subjects were 16 and 18 years of age. The sample consisted of 19 male and 14 female subjects with no previous orthodontic treatment who had normal occlusion. The craniofacial growth changes of these samples during this study period might be summarized as follows 1. Significant increase in mean maxillary and mandibular length, cranial base length, posterior md anterior facial height were observed at the age period studied in male(P<0.05), however, in female significant increase was observed only mandibular length(Ar-Gn, Ar-Go) and anterior and posterior facial height(P<0.05). 2. Total growth increment of all measumenats were below 1mm in female, but in male, total mandibular(Ar-Gn) growth increment was 2.0mm and those of mandibular tody length, ram length, posterior facial height, and anteior facial height were 1 to 1.54mm and the others were below 1mm 3. A closing, forward rotation of the mandible occured with a significant decrease in mandibular plane angle of $0.61^{\circ}$ in male(P<0.01). 4. Summarized the findings, even though statistically significant growth changes in some dimensions of female were observed, the amount of growth change were very small, however, in male the growth changes of some dimensions associated with mandible were significant and considerable amount.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.4
• /
• pp.325-334
• /
• 2010

In this study, an unbraced five-story steel-framed structure was designed in accordance with KBC2005 to understand the features of structural behavior for the arrangement of semi-rigid connections. A pushover analysis of the structural models was performed, wherein all the connections were idealized as fully rigid and semi-rigid. Additionally, horizontal and vertical arrangements of the semi-rigid connection were adopted for the models. A fiber model was utilized for the moment-curvature relationship of the steel beam and the column, and a three-parameter power model was adopted for the moment-rotation angle of the semi-rigid connection. The top displacement, base-shear force, required ductility for the connection, sequence of the plastic hinge, and design factors such as the overstrength factor, ductility factor, and response modification coefficient were investigated using the pushover analysis of a 2D structure subjected to the equivalent static lateral force of KBC2005. The partial arrangement of the semi-rigid connection was found to have secured higher strength and lateral stiffness than that of the A-Semi frame, and greater ductility than the A-Rigid frame. The TSD connection was found suitable for use for economy and safety in the sample structure.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.2
• /
• pp.129-137
• /
• 2010

In this study, a five-story steel frame was designed in accordance with KBC2005 to evaluate the effect of the beam-column connection on the structural behavior. The connections were designed as a fully rigid connection and as a semirigid connection. A fiber model was utilized to describe the moment-curvature relationship of the steel beam and column, and a three-parameter power model was adopted for the moment-rotation angle of the semirigid connection. To evaluate the effects of higher modes on structural behavior, the structure was subjected to a KBC2005-equivalent lateral load and lateral loads considering higher modes. The structure was idealized as a separate 2D frame and as a connected 2D frame. The pushover analysis of 2D frames for the lateral load yielded the top displacement-base shear force, design coefficients such as overstrength factor, ductility ratio, and response modification coefficient, demanded ductility ratio for the semirigid connection,and distribution of plastic hinges. The sample structure showed a greater response modification coefficient than KBC2005, the higher modes were found to have few effects on the coefficient, and the lateral load of KBC2005 was found to be conservative. The TSD connection was estimated to secure economy and safety in the sample structure.

• Journal of Korean Society of Forest Science
• /
• v.97 no.1
• /
• pp.45-52
• /
• 2008

The objectives of this study are to explain a supply plan of domestic softwood log by long-term prospect of MDF production to stably promote industry of MDF. For it, we developed the long supply function as Ordinary Least Squares Method. Between 2005 and 2050, it was estimated that quantity of domestic production of MDF increased from 1,653 thousand $m^3$ to 2,041 thousand $m^3$. In 2050, quantities of domestic softwood log used by raw materials to product MDF of 2,041 thousand $m^3$ were estimated to be used about 1,355 thousand $m^3$. Exampling Pinus rigida used presently by raw materials to product MDF, cutting area of it is estimated to be 10,828 ha per year. And larch is cutted about 9,160 ha per year. This study estimated annual softwood log cutting amount and total afforestation area at 2050 year by 3 scenarios which are 35%, 45% and 55% about use of domestic softwood log for MDF production. If we do a criterion of cutting area, we advantage to plant larch. But the species of trees are use and growth property. We think that the afforestation policy must be performed on the base of those to supply raw materials of MDF. Although government plans hardwood afforestation policy after cutting Pinus rigida, it needs to support and manage certainly afforestation area of softwoods to need to supply raw materials of MDF to stably promote industry of MDF.