• Journal of the Korean Society of Safety
• /
• v.28 no.2
• /
• pp.26-30
• /
• 2013

The purpose of this study is to find risk factors by analyzing the operation principle of a photo coupler (P/C) used to remove the noise of electronic devices and establish a base for the performance improvement of developed products. It was found from the P/C circuit analysis of normal products that they were equipped with an electrolytic condenser of $0.1{\mu}F$ to smooth system signals. Due to the epoxy resin packing the external part of the P/C, this study experienced a limit to visually examine the damage to it. It could be seen from the analysis of electric characteristics of the P/C that the forward voltage ($V_f$) and reverse current ($I_r$) were 1.3 V and 10 uA, respectively. In addition, it is required that the breakdown voltage (VCE) between the collector (C) and emitter (E) be maintained at less than 35 V. The and of the damaged product #1 were comparatively good. However, the measurement of was 100.0 uA. From this, it is thought that a short circuit occurred to the internal circuit. Moreover, from the fact that the of the damaged product #2 was open circuit and the measurement of was 0.0 uA, it is thought that the collector and emitter was separated or insulation resistance was significantly high. Furthermore, from the fact that the of the damaged product #3 was open circuit and the measurement of was 0.0 uA, it is thought that the space between the collector (C) and emitter (E) failed to meet the design standard or that they were separated. Therefore, it is thought that fabricating the P/C by increasing the reverse current 10 mA to 50 mA will prevent its malfunction.

• Mycobiology
• /
• v.40 no.1
• /
• pp.20-26
• /
• 2012

The complexes of tailor made ligands with life essential metal ions may be an emerging area to answer the problems of multi drug resistance. The coordination complexes of VO(II), Co(II), Ni(II) and Cu(II) with the Schiff bases derived from isatin with 3-chloro-4-floroaniline and 2-pyridinecarboxaldehyde with 4-aminoantipyrine have been synthesized by conventional as well as microwave methods. These compounds have been characterized by elemental analysis, molar conductance, electronic spectra, FT-IR, FAB mass and magnetic susceptibility measurements. FAB mass data show degradation of complexes. Both the ligands behave as bidentate and tridentate coordinating through O and N donor. The complexes exhibit coordination number 4, 5 or 6. The Schiff base and metal complexes show a good activity against the bacteria; $Staphylococcus$ $aureus$, $Escherichia$ $coli$ and $Streptococcus$ $fecalis$ and fungi $Aspergillus$ $niger$, $Trichoderma$ $polysporum$, $Candida$ $albicans$ and $Aspergillus$ $flavus$. The antimicrobial results also indicate that the metal complexes are better antimicrobial agents as compared to the Schiff bases. The minimum inhibitory concentrations of the metal complexes were found in the range 10-40 ${\mu}g/mL$.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.3 no.1
• /
• pp.32-43
• /
• 1995

Ni-Ti alloy has excellent corrosion resistance, biocompatibility, shape memory effect and superelasticity, so it has been used widely in biomedical fields. But it has difficulty in casting due to its high melting temperature and oxygen affinity at high temperature. Recently it has been attempted to cast Ni-Ti alloy using new casting machine and investment. The purpose of this study was to examine the superelastic behavior of cast shape memory Ni-Ti alloy and to compare the mechanical properties of the cast shape memory alloy with those of commercial alloys for removable partial denture framework. Ni-Ti alloy(Ni 50.25%, Ti 49.75% : atomic ratio) was cast with dental argon-arc pressure casting machine and Type IV gold alloy, Co-Cr alloy, Ni-Cr alloy, pure titanium were cast as reference. Experimental cast Ni-Ti alloy was treated with heat($500{\pm}2^{\circ}C$) in muffle furnace for 1 hour. Transformation temperature range of cast Ni-Ti alloy was measured with differential scanning calorimetry. The superelastic behavior and mechanical properties of cat Ni-Ti alloy were observed and evaluated by three point bending test, ultimate tensile test, Vickers microhardness test and scanning electron microscope. The results were as follows : 1. Cast Ni-Ti alloy(Ni 50.25%, Ti 49.75% : atomic ratio) was found to have superelastic behavior. 2. Stiffness of cast Ni-Ti alloy was considerably lesser than that of commercial alloys for removable partial denture. 3. Permanent deformation was observed in commercial alloys for removable partial denture framework at three point bending test over proportional limit(1.5mm deflection), but was not nearly observed in cast Ni-Ti alloy. 4. On the mechanical properties of ultimate tensile strength, elongation and Vickers microhardness number, cast Ni-Ti alloy was similiar to Type IV gold alloy, Co-Cr alloy, Ni-Cr alloy and pure titanium. With these results, cast Ni-Ti alloy had superelastic behavior and low stiffness. Therefore, it is suggested that cast Ni-Ti alloy may be applicated to base metal alloy for removable partial denture framework.

• Corrosion Science and Technology
• /
• v.13 no.5
• /
• pp.178-185
• /
• 2014

Alloy 617 is considered as a candidate Ni-based superalloy for the intermediate heat exchanger (IHX) of a very high-temperature gas reactor (VHTR) because of its good creep strength and corrosion resistance at high temperatures. Helium is used as a coolant in a VHTR owing to its high thermal conductivity, inertness, and low neutron absorption. However, helium inevitably includes impurities that create an imbalance in the surface reactivity at the interface of the coolant and the exposed materials. As the Alloy 617 has been exposed to high temperatures at $950^{\circ}C$ in the impure helium environment of a VHTR, the degradation of material is accelerated and mechanical properties decreased. The high-temperature strength, creep, and corrosion properties of the structural material for an IHX are highly important to maintain the integrity in a harsh environment for a 60 year period. Therefore, an alloy superior to alloy 617 should be developed. In this study, the mechanical and high-temperature corrosion properties for Ni-Cr alloys fabricated in the laboratory were evaluated as a function of the grain boundary strengthening and alloying elements. The ductility increased and decreased by increasing the amount of Mo and Cr, respectively. Surface oxide was detached during the corrosion test, when Al was not added to alloy. However the alloy with Al showed improved oxide adhesive property without significant degradation and mechanical property. Aluminum seems to act as an anti-corrosive role in the Ni-based alloy.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.2
• /
• pp.34-41
• /
• 2011

Wrought nickel-base superalloys are being considered as the structural materials in very-high temperature gas-cooled reactors. To understand the effects of impurities, especially oxygen, in helium coolant on the mechanical properties of Alloy 617, creep tests were performed in high temperature flowing He environments with varying $O_2$ contents at 800, 900, and $1000^{\circ}C$. Also, creep life in static He was measured to simulate the pseudo-inert environment. Creep life was the longest in static He, while the shortest in flowing helium. In static He, impurities like $O_2$ and moisture were quickly consumed by oxidation in the early stage of creep test, which prevented further oxidation during creep test. Without oxidation, microstructural change detrimental to creep such as decarburization and internal oxidation were prevented, which resulted in longer creep life. On the other hand, in flowing He environment, surface oxides were not stable enough to act as diffusion barriers for oxidation. Therefore, extensive decarburization and internal oxidation under tensile load contributed to premature failure resulting in short creep life. Limited test in flowing He+200ppm $O_2$ resulted in even shorter creep life. The oxidation samples showed extensive spallation which resulted in severe decarburization and internal oxidation in those environments. Further test and analysis are underway to clarify the relationship between oxidation and creep resistance.

• Journal of the Korean Ceramic Society
• /
• v.29 no.12
• /
• pp.935-941
• /
• 1992

The LAS system with good thermal properties has a narrow range of firing and sintering temperature near the melting point. So it is difficult to sinter LAS to dense sintered body. In this study, the petalite (Li2O.Al2O3.8SiO2) with good thermal properties, was taken as a base composition, and zironia was added in this composition to broaden the firing range, increase the mechanical strength, and control the thermal expansion. The thermal and mechanical properties were investigated. The results are as follows; 1. Zirconia phase was formed in LAS matrix and apparent porosity was decreased from 0.9% to 0.5%, and the mechanical strength was kincreased from 112 MPa to 190 MPa, by the densification of body. 2. The composition Li2O.Al2O3.8SiO2 has a negative thermal expansion, but the thermal expansion was changed from negative to positive with the densification and the increase of amount of synthesized zircon phase which had positive thermal expansion. The coefficient of thermal expansion, with the increase of the amount of additives, was low as -0.74~9.06$\times$10-7/$^{\circ}C$ in 20~$600^{\circ}C$, and 7.95~20.13$\times$10-7/$^{\circ}C$ in 20~80$0^{\circ}C$. 3. The mechanical strength of LZ15 (added with ZrO2.SiO2 15 wt%) composition thermal-shocked was stable in the temperature range of 0~$600^{\circ}C$, but rapidly decreased due to the increase of thermal expansion above $600^{\circ}C$.

• Journal of the Korean Society of Costume
• /
• v.52 no.5
• /
• pp.173-186
• /
• 2002

Street Style, occurred in British and America, has been expressed the character of the new generation by repeating developments and changes. Nowadays, pop music reflects the phase of society. and simultaneously it has influence on from culture to society. Rock Music was rooted in Country 8l western of America. Upon Country & Western, Afro-Americans Rhythm & Blues was added, and that was the birth of Rockabilly. Rockabilly developed to Rock'n 'roll and it started to change to various forms of Rock since 1950s. As the commercial impact and the breakthrough of teenagers emotion, the rock culture comprised the base of the youth culture. However. it formed the anti-establishment culture against the established value, accepting working class subculture. The teenager culture was affected by the Rock culture, also found relief in the opulence provided by the established generation, imitating it as it was. Simultaneously, it had a contrary aspect as anti-establishment form under the banner of revolt against languor in richness. The youth culture created street style that was escaped from high fashion, every time Rock music had changes. Since Street style was based on resistance of established culture and it fully refused vogue, it was indifferent from high fashion. The results of this study were as following. First, every time Rock music had changes, the new youth culture was concomitant with, the youth culture created street style. Secondly, rockahibilly style was characterized as diamond shaped design, embroidery, extra wide shirt collar, vivid contrast color . Rockers style was represented as metal studs, beads, denim, leather jacket, boots. Fusion of hippies style and Psychedelic, long hair, beads. worn denim were elements of headbangers style. Punks style was characterized as ripped T-shirt. rooster hair, over decorated jacket, short skirt. net or plastic T-shirt. Lastly, the firm relation between popular art and fashion was proved by examining the history of Rock Music and Street Style.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.1
• /
• pp.173-183
• /
• 2017

The purpose of this study is to find out the difference of sense of self-efficacy and stress encountering strategy of university students under the stress situation depending on the smart-phone user group (addiction group, general user group). For this purpose, the study issues are established as follows. First, it has analyzed what is the correlation of smart-phone addiction, sense of self-efficacy, and stress encountering strategy. Second, it has studied if there is any difference of sense of self-efficacy and stress encountering strategy for the smart-phone user group. In order to verify such study issues, For 1,670 university students in the Chungcheong area, smart-phone addiction scale, sense of self-efficacy scale, and stress encountering method scale were administered. Looking into the study result, first, as a result of the relativity analysis, it displayed the correlation of preference of test difficulty, self-control efficacy and important negative from the smart-phone addiction and sense of self-efficacy. In addition, all sub-variables of smart-phone addiction and avoidance orientation from the stress encountering strategy displayed the important positive correlation, and from the smart-phone addiction, the virtual world orientation and pursuit of social-support displayed the important negative correlations, and all sub-variables (interference with ordinary living, virtual world striving direction, withdrawal, resistance) of smart-phone addiction and problem solving-orientation displayed the negative correlation. Second, as a result of verification for the difference of the smart-phone addiction group and general use group following the sense of self-efficacy, the general use group is shown to have higher self-control efficacy sense than the addiction group. And third, as a result of verifying the difference of stress encountering following the smart-phone addiction group and general use group, the addiction group is shown to be lower than the general use group in terms of social support pursuit and problem solution orientation with the avoidance orientation shown to be higher. This type of result is expected to provide the base data when developing the smart-phone addiction preventive education program by finding out in details for the characteristics of smart-phone addiction group for university students.

• Journal of Korean Society on Water Environment
• /
• v.26 no.4
• /
• pp.608-613
• /
• 2010

Electricity generation of microbial fuel cells (MFC) is greatly affected by the kind of feed substrates because substrates would change microbial community of electrochemically active bacteria (EAB) able to transfer electrons to electrode. The effect of different substrates on electricity generation and microbial community of MFC was investigated. Two-chamber MFCs fed with acetate (A-MFC), butyrate (B-MFC), propionate (P-MFC), glucose (G-MFC) and a mixture (M-MFC) of the 4 substrates (acetate : butyrate : propionate : glucose = 1 : 1 : 1 : 1 as $COD_{Cr}$ base) were operated under continuous mode. The maximum power density was found from the M-MFC ($190W/m^3$) which showed the lowest internal resistance ($89{\Omega}$). The maximum power densities of the pure substrates feed MFCs were in order of A-MFC ($25W/m^3$), P-MFC ($21W/m^3$), B-MFC ($20W/m^3$) and G-MFC ($9W/m^3$). In DGGE analysis, the microbial community structure in suspension was quite different from each others depending on feed substrates, while the community structure in the biofilm was relatively similar regardless of the substrates. This result suggests that the feed substrates would affect the microbial community of suspended growth bacteria than attached growth bacteria resulting in difference of electricity generation in MFCs.

• Journal of Environmental Impact Assessment
• /
• v.16 no.2
• /
• pp.129-141
• /
• 2007

With its more than 35 years of experience with EIA of NEPA in United States, the extensive knowledge base of EIA could be the most suitable place for initial field of HIA to explore lessons available for. However, caution is needed as the technical differences in analysis, different policy context, and distinct professional culture between EIA and HIA might be. The successe of EIA of NEPA is the integration of environmental goals into decision making process, improved planning, and increased transparency and public involvement, whereas shortcomings of it were defined as the excessive volume and complexity of EIA documents, the limited and adversarial public involvement, the procedural process (not substantive), focus on projects (not on policies and programs), and the limited consideration of health impacts. Integrating HIA into existing EIA process is positive in two reasons that the human health is closely related with natural environment and EIA process is a fully established process that effectively cuts across bureaucratic and sectoral boundaries. Also, integrating of HIA into EIA might be a way with least resistance for the widespread use. A freestanding HIA separated from EIA is desirable in terms of excessive volume of EIA documents and the procedural and legal focus of EIA. It is needed to develop the formulated methodologies for advancing HIA whether it is a part of or separated from EIA, and to estimate the potential values of HIA in the substantial society context. When possible, HIA should be established on the ways that EIAs have been used successfully.