• 한국농공학회논문집
• /
• 제60권1호
• /
• pp.1-10
• /
• 2018

This study analyzed pore water pressure, seepage and leakage quantity, height of seepage and critical hydraulic gradient in order to suggest the seepage characteristics of agricultural reservoir embankment considering filter interval. The seepage characteristics of a deteriorated reservoir embankments were conducted according to the horizontal filter intervals range using three- dimensional finite element analysis. The wider the horizontal filter interval, the higher the pore water pressure increased, and the pore water pressure ratio in the center of the core has a greater effect than the base part. The seepage and leakage quantity appeared largely in the two-dimensional analysis conditions (case 1), where the filter was constructed totally in the longitudinal direction of the embankment, the wider the horizontal filter interval was gradually reduced. The reasonable filter intervals to yield efficient seepage characteristics were within 30 m for the pore water pressure of the core and the height of the seepage line. The stability of the filter installation was able to evaluate the stability of the piping by the critical hydraulic gradient method. The deteriorated reservoir with no filters or decreased functionality can significantly reduce the possibility of piping by simply installing a filter on the downstream slope. In the future, the deteriorated reservoir embankment should be checked for the reservoir remodeling because the core and filter functions have been lost or decreased significantly. In the case of a new installation, the seepage characteristic behavior due to the core and filter changes should be applied to the field after obtaining a reasonable horizontal filter interval that satisfies the safety factor by a three-dimensional analysis.

• 사물인터넷융복합논문지
• /
• 제6권2호
• /
• pp.93-100
• /
• 2020

유·무선 연결이 가능한 홈 디바이스의 증가로 다양한 홈 서비스가 나타나고 있으나, 인가 없는 원격 접속으로 사생활 침해와 개인정보의 유출이 발생하고 있다. 이는 디바이스의 인증 부재와 전송 데이터의 보호가 없는 것에 대부분 기인한다. 본 논문에서는 스마트폰을 사용하여 디바이스의 비밀 정보를 안전한 메모리에 저장하고 디바이스의 인증을 수행한다. 패스워드에 디바이스 개인키를 곱한 그림자 패스워드를 디바이스에 저장하여 디바이스 패스워드의 직접적인 유출을 막는다. 또한, Lamport의 일회용 패스워드 기법으로 스마트폰과 디바이스를 상호인증하고, SRP 프로토콜을 이용하여 패스워드를 복구하여 디바이스 사이의 세션키를 공유하는 방법을 제안한다. 본 논문에서 제안하는 프로토콜은 도청, 재전송, 위장 공격 등에 안전하다.

• 대한두경부종양학회지
• /
• 제32권2호
• /
• pp.91-94
• /
• 2016

A 37 year-old male presented with sudden right proptosis and bilateral nasal obstruction. A huge tumor was noted in bilateral nasal cavities, ethmoid sinuses and central frontal sinus on magnetic resonance imaging. Right posterior frontal sinus wall and bilateral medial orbital wall was destructed by the tumor. Complete resection of the tumor was performed via minimal invasive craniofacial resection. Histopaghologic examination revealed sinonasal undifferentiated carcinoma (SNUC). Cerebrospinal fluid leakage was developed after 2 days of the surgery. On the 5th day, anterior skull base was reconstructed with forearm free flap (FFF). The patient got 6000cGy of radiotherapy and survived in 27 months of follow up.

• 한국해양공학회지
• /
• 제27권3호
• /
• pp.79-84
• /
• 2013

The seawater pipes in the engine rooms of ships are surrounded by severely corrosive environments caused by fast flowing seawater containing chloride ions, high conductivity, etc. Therefore, it has been reported that seawater leakage often occurs at a seawater pipe because of local corrosion. In addition, the leakage area is usually welded using shielded metal arc welding with various electrodes. In this study, when seawater pipes were welded with four types of electrodes(E4311, E4301, E4313, and E4316), the difference between the corrosion resistance values in their welding zones was investigated using an electrochemical method. Although the corrosion potential of a weld metal zone welded with the E4316 electrode showed the lowest value compared to the other electrodes, its corrosion resistance exhibited the best value compared to the other electrodes. In addition, a heat affected zone welded with the E4316 electrode also appeared to have the best corrosion resistance among the electrodes. Furthermore, the corrosion resistance of the weld metal zone and heat affected zone exhibited relatively better properties than that of the base metal zone in all of the cases welded with the four types of electrodes. Furthermore, the hardness values of all the weld metal zones were higher than the base metal zone.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권8호
• /
• pp.877-885
• /
• 2013

선박 기관실의 해수 배관은 염소이온 농도와 전기 전도성이 높은 해수가 빠른 속도로 유동하는 환경에 놓여 있게 된다. 따라서 부식성이 강한 염소 이온으로 인해 배관 내부에 국부 부식이 발생하여 해수가 누설되는 경우가 종종 발생하고 있다. 그래서 해수 배관의 누설 부위에 대해 일반적으로 선박 내에서 여러 가지 피복아크용접봉을 사용하여 교류 아크용접기로 보수용접을 한다. 본 연구에서는 해수파이프 등에 E4301, E4311, E4313 및 E4316과 같은 피복아크용접봉으로 용접한 경우, 용접부위에 대해 영역별로 내식성 차이를 전기화학적 방법으로 비교 분석하고, 각각의 용접부위에 대한 미세조직 관찰 및 미소 비커스 경도를 측정하였다. E4313의 용접봉을 사용한 용접부가 다른 용접봉을 사용한 용접부에 비해 가장 낮은 경도 값을 나타내었으나 내식성은 가장 우수하게 나타나고 있다. 그리고 용접봉의 종류에 관계없이 용접부는 모재보다 상대적으로 내식성이 더 우수하였고, 경도도 더 높은 값을 나타내었다.

• Restorative Dentistry and Endodontics
• /
• 제26권4호
• /
• pp.332-340
• /
• 2001

Flowable composite resin has lower filler content, increased flow, and lower modules of elasticity. It is suggested that flowable composite resin can be bonded to the tooth structure intimately and absorb or dissipate the stress. Therefore, it may be advantageous to use flowable composite resin for the base material of class II restoration and for the class V restoraton. The purpose of this study was to evaluate the microleakage and shear bond strength of four flowable composite resins (Aeliteflo, Flow-It, Revolution, Ultraseal XT Plus) compared to Z100 using Scotchbond Multi Purpose dentin bonding system. To evaluate the microleakage, notch-shaped class V cavities were prepared on buccal and lingual surfaces of 80 extracted human premolars and molars on cementum margin. The teeth were randomly divided into non-thermocycling group (group 1) and thermocycling group (group 2) of 40 teeth each. The experimental teeth of each group were randomly divided onto five subgroups of eight samples (sixteen surfaces). The Scotchbond Multi-Purpose and composite resin were applied for each group following the manufacturer's instructions. the teeth of group 2 were thermocycled five hundred times between 5$^{\circ}C$ and 55$^{\circ}C$. The teeth of group 2 were placed in 2% methylene blue dye for 24 hours, then rinsed with tab water. The specimens were embedded in clear resin, and sectioned longitudinally with a diamond saw. The dye penetration on each of the specimen were observed with a stereomicioscope at $\times$20 magnification. To evaluate the shear bond strength, 60 teeth were divided into five groups of twelve teeth each. The experimental teeth were ground horizontally below the dentinoenamel junction, so that no enamel remained. After applying Scotchbond Multi-Purpose on the dentin surface, composite resin was applied in the shape of cylinder. The cylinder was 4mm in diameter and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. After shear bond strength measurement, mode of failure was evaluated with a stereomicroscope at $\times$30 magnification. All data were statistically analyzed by One Way ANOVA and Student-Newman-Keuls method. The correlation between microleakage and shear bond strength was analyzed by linear regression. The results of this study were as follows ; 1. In non-thermocycling group, the leakage value of Z100 was significantly lower than those of flowable composite resins at the enamel and dentin margin, margin, except that Revolution showed the lower leakage value than that of Z100 at the dentin margin (p<0.05). 2. In thermocycling group, the leakage values of Z100 and Ultraseal XT Plus were lower than those of other subgroup at the enamel and dentin margin, except that Flow-It showed the lower leakage value than that of Ultraseal XT Plus at the dentin margin (p<0.05). 3. The leakage value of Z100 and Ultraseal XT Plus in thermocycling group were not higher than that in non-thermocycling group at the enamel margin. The leakage value of Z100 in thermocycling group was not higher than that in non-thermocycling group at the dentin margin (p<0.05). 4. As for the shear bond strength measurement, there were no statistically significant differences among groups (p<0.05). The shear bond strengths given in descending order were as follows: Z100(16.81$\pm$2.98 MPa), Flow-It(14.8$\pm$4.43 MPa), Aeliteflo(14.34$\pm$3.69 MPa), Revolution(13.46$\pm$4.23 MPa), Ultraseal XT Plus(12.83$\pm$3.16 MPa). 5. Failure modes of all specimens were adhesive failures. 6. There was no correlation between microleakage and shear bond strength.

• 한국컴퓨터정보학회논문지
• /
• 제27권12호
• /
• pp.131-139
• /
• 2022

본 논문에서는 지상 기지국을 보조하는 UxNB의 진본성 검증을 위해, 3GPP TR 33.809에 제시된 시스템 정보(System Information) 보안을 위한 솔루션들을 UxNB 관점에서 분석한다. 3GPP(Third Generation Partnership Project)의 정의에 따르면, UxNB는 UAV(Unmanned Aerial Vehicle)에 탑재한 기지국(Base Station)이며, UAV에 의해 공중에서 운반되며 UE(User Equipment)에게 연결을 제공하는 무선 접속 노드이다. 시스템 정보(System Information) 보안을 위한 솔루션들은 해시(Hash) 기반, MAC(Message Authentication Codes) 기반, 디지털 서명(Digital Signature) 기반으로 분류할 수 있으며, 각 범주별로 대표적인 솔루션을 하나씩 소개한다. 각 솔루션별로 UxNB의 진본성 검증 관점에서 사전 배포 정보 및 업데이트, UxNB의 보안 정보 유출, 추가적으로 요구되는 연산량 및 전송량 측면에서 해당 솔루션들을 비교 분석한다. 분석 결과, UxNB의 진본성 검증을 위한 솔루션은 UxNB에 저장될 비밀 정보가 최소화되어야 하고, 안전한 장소에 저장되어야 하고, 무선으로 업데이트되면 이를 위해서 암호화를 적용해야 한다. 또한 UxNB의 낮은 컴퓨팅 파워와 전원 부족의 특성으로 인하여 연산량 및 전송량을 최소화해야 한다.

• Restorative Dentistry and Endodontics
• /
• 제17권2호
• /
• pp.307-330
• /
• 1992

The aim of this study was to investigate the physical properties of visible light curing Glass Ionomer cement for restorative esthetic filling. The control group was the autopolymerizing GC Fuji II Glass Ionomer cement (2.2: 1 P/L ratio) and the experimental groups were made by following procedure. To induce the polymerization by visible light, the powder of GC Fuji II GI cement and the liquid of Vitrabond for base & liner were mixed in an amalgam capsule with 2.5:1, 3.0:1, 3.5:1 P/L ratio (% wt/wt). After fabrication of specimens, compressive strength, fracture toughness ($K_{IC}$) Scanning Electron Microscope and X-ray Diffraction, water-leachable content, marginal leakage and surface roughness were studied. The results were as follows: 1. Only experimental No. 1 group (visible light curing) showed less compressive strength than control group 1 hour after curing. Strength was increased with aging in all groups, so the compressive strength of light curing groups was no less than that of autopolymerizing group after 3 weeks. 2. Experimental No.3 group (visible light curing) was inferior to No.2 group (visible light curing) in fracture resistance but light curing groups were more resistant to fracture than autopolymerizing group and showed ductile fracture pattern as compared with the brittle fracture pattern of autopolymerizing group. 3. From scanning electron microscopic image, various sized unreacted powder particles, surrounded by silica gel, were embedded in polysalt matrix. Light curing groups showed little crack and more dense unreacted particles than autopolymerizing group. 4. From X-ray diffraction analysis, GC Fuji II Glass Ionomer cement powder and all groups showed glassy appearance but light curing groups seemed to be more intensive in crystaline than autopolymerizing group. S. The most significant dissolution was shown in early setting period in all group. Light curing groups were dissolved less than autopolymerizing group. 6. Marginal leakage was not different significantly in case of cavity margin composed of same tooth structure (ex. only enamel margin, only dentin margin) but much more leakage was shown in dentin/cementum margin than enamel margin. In only case of only enamel margin, light curing groups were superior to autopolymerizing group. 7. All groups showed relatively smooth surface, which irregularity was less than $1{\mu}m$. Light curing groups were smoother than autopolymerizing group.

• 농업과학연구
• /
• 제39권1호
• /
• pp.97-110
• /
• 2012

This study was carried out for safety evaluation, the practical application and improvement of design method of the agricultural reservoir embankment according to backside extension. Seepage analysis, slope stability analysis and finite element analysis were performed for steady state and transient conditions. Also, the pore water pressure, seepage quantity, safety factor and stress-strain behavior according to high water level and rapid drawdown were compared and analyzed. The pore water pressure at contact region between backside extension and old embankment was kept high after rapid drawdown. Therefore, backside extension is recommended that design method is required to be improved and reinforced more than the others raising embankment. The hydraulic gradients before and after backside extension showed high value at the base of the core, but they showed stable state at the upstream slope and downstream slope. The seepage quantity per 1 day and the leakage per 100 m for the steady state and transient conditions appeared to be safe against the piping. The safety factor of slope stability showed high at the steady state, and transient conditions did not show differences depending on the rapid drawdown. The safety factor was appeared high at the upstream slope before backside extension and downstream slope after extension. The excess pore water pressure for steady state and transient conditions showed negative(-) at the upstream slope, it was small at the downstream slope. The mean effective stress (p') showed high at the base of the core and to be wild distribution after the extension. The displacement after extension showed 0.02-0.06 m in the upstream slope, the maximum shear strain after extension was smaller than that before extension.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권4호
• /
• pp.291-297
• /
• 2015

미래의 화석연료를 대체할 가능성이 큰 에너지원으로써, 수소는 인류의 궁극적인 연료로 주목받고 있으나, 작은 분자 크기로 인하여 저장 용기의 작은 틈으로부터 쉽게 누설된다. 본 연구에서는 수소 누설을 탐지하기 위하여 레이저 유도 붕괴 분광법(Laser Induced Breakdown Spectroscopy, LIBS)을 사용하였고, 플라스마 생성 방법에 따른 본 기술의 적합성을 평가하였다. 금속 표면에 플라스마를 일으켜 수소 원자광을 얻는 방법은 플라스마를 작은 레이저 출력 (295mW)에서 유도 할 수 있지만, 수소 기체에 직접 플라스마를 유도하는 방법은 약 2.6배 높은 레이저 출력이 필요하였다. 두 방법 모두 픽 투 베이스(Peak to Base) 비율이 수소농도에 대하여 선형적인 경향을 보였으며, 공기 중 수소의 농도가 5% 미만인 경우 본 기술은 수소 누설 검출에 적합한 기술로 판단된다.