• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3139-3141
• /
• 2000

전압제어 트랜스컨덕터를 설계하여 튜닝범 위가 넓은 Gm-C 대역통과 필터를 CMOS 공정으로 설계하였다 Gm-C 필터는 트랜스컨덕터와 캐패시터로 구성된 적분기를 기본으로 구현되고 있다. 따라서 트랜스 컨덕터는 출력단에 캐패시터를 연결하였을 때 이상적인적인 적분기의 특성에 가까울수록 필터의 특성이 좋아지고 PLL 구조의 튜닝이 용이해진다. 본 논문에서는 1:3이상의 범위에서 튜닝이 가능하고 PLL을 기본으로한 자동튜닝과 선형전압 튜닝을 조합하여 주파수 제어회로를 설계하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.377-382
• /
• 2000

Film bulk acoustic resonator (FBAR) using AIN reactively sputtered at room temperature was fabricated. The FBAR is composed of a piezoelectric aluminium nitride thin film, top electrode of Al and bottom electrode of Au connected by a short (200${\mu}{\textrm}{m}$) transmission line on both sides and reflector layers of SiO$_2$- W Pair. The active areas of Al and Au were patterned using 150${\mu}{\textrm}{m}$ diameter shadow mask. The series resonance frequency (fs) and the parallel resonance frequency (fp) were measured at 1.976 GHz and 2.005 GHz, respectively. The minimum insertion loss and return loss were 6.1 dB and 37.19 dB, and the quality factor (Q) was 4261.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.275-278
• /
• 2003

The aim of the study is to scrutinize the relationship between the area of resonance and center frequency with varying thickness by analyzing the characteristics of 2-port resonator. This was done through ideal design using Leach model equivalent model modified Mason model equivalent circuit for the application of bandpass filter high-frequency band with resonator Moreover, through the design of ladder-type BPF, we were able to observe changes in bandwidth, resonation, out-of-band rejection depending on the number and area of resonator.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.148-149
• /
• 2000

파장분할다중(WDM) 광통신시스템에서 광원의 파장을 정확하게 측정하는 것은 매우 중요하다. 지금까지 광파장측정기는 격자나 Fabry-Perot 에탈론을 사용한 광대역 필터(optical bandpass filter) 및 파장에 따라 삽입손실이 다른 파장판별기(wavelength discriminator)등으로 구현되었지만 빛의 간섭 현상을 이용한 마이켈슨 간섭계가 가장 많이 사용되었다. 특히 푸리에 변환 마이켈슨 간섭계 파장측정기$^{(1)}$ 는 동시에 각각 다른 파장의 광원들이 입사되더라도 각각의 파장을 측정할 수 있는 장점이 있다. 즉 마이켈슨 간섭계에서 주기적인 간섭무늬에 의한 광검출기의 출력은 입력된 광파장에 따라 다른 주기를 가진다. 따라서 서로 다른 파장을 가진 빛이 입사했을 때 검출되는 각각의 광전력의 합을 표본화(sampling)한 뒤 FFT를 거치면 광파장과 광검출기로 수신한 신호의 중심 주파수의 관계를 알 수 있으므로, 서로 다른 파장을 가진 빛이 입사하더라도 각각의 파장을 측정할 수 있는 것이다. 본 논문에서는 푸리에 변환을 이용하되 마이켈슨 간섭계 대신 마하젠더 간섭계형 광변조기를 이용하여 광파장을 측정에 관한 실험적 구현과 개선 방안에 대해 제시한다. (중략)

• Current Optics and Photonics
• /
• v.6 no.6
• /
• pp.634-641
• /
• 2022

A frequency stable and tunable optoelectronic oscillator (OEO) incorporating an optical phase shifter and a phase-shifted fiber Bragg grating (PS-FBG) is designed and analyzed. The frequency tunability of the OEO can be realized by using a tunable microwave photonic bandpass filter consisting of a PS-FBG, a phase modulator. The optical phase compensation loop is used to compensate for the phase variations of the RF signal from the OEO by adjusting an optical phase shifter. Simulation results demonstrate that the output RF signals of the OEO can be tuned in a frequency range of 118 MHz to 24.092 GHz. When the ambient temperature fluctuates within ±3.9 ℃, the frequency drifts of the output RF signals are less than 68 Hz, the side-mode suppression ratios are more than 69.39 dB, and the phase noise is less than -92.49 dBc/Hz at a 10 kHz offset frequency.

• Journal of information and communication convergence engineering
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2023

This paper presents a design method for a wideband bandpass filter (BPF) which compensates for frequency dependency based on the image admittance and image phase. In the proposed method, new compensation methods for the admittance and phase are integrated with the conventional method. The proposed method improves the frequency shift and reduces the unwanted bandwidth when designing more than 20% of the Fractional Bandwidth (FBW), whereas the conventional method exhibits frequency degradation at only 10% FBW. The proposed design theory was verified by applying it to both lumped elements and distributed lines through circuit simulation and measurements without an optimization process. The measurement results demonstrate improvements in the frequency shift and target bandwidth. In the future, an accurate design method based on frequency dependence can be implemented for the next-generation broadband communication system applications.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.5
• /
• pp.616-624
• /
• 1986

In this paper, we propose an accurate design method of E-plane type filters using the synthesis procedures and the passband correction factor. This correction factor is obtained from the actual insertion losses of the pre-designed filter at band edge frequencies. For this study a CAD program has been developed. In this program, the Fin-line structures are analyzed by the variational analysis routines. Unilateral Fin-line filters and bilateral Fin-line filters are fabricated in the X-band. Experimental results show excellent agreement with the theory.

• Journal of IKEEE
• /
• v.12 no.3
• /
• pp.144-150
• /
• 2008

This paper describes the design of a coplanar-stripline(CPS) antenna without via hole in microstrip patch type for 910MHz RFID tags using the HFSS simulator. In order to obtain the simplified fabrication design of the antenna, we have used only an impedance matching network to match the impedance of a RFID-tag chip to that of the antenna, not using bandpass filter(BPF). In advance of the optimized antenna design, we have obtained and shown a good agreement compared with the published antenna for 5.8GHz in order to verify the simulation parameters in the HFSS. Based on the verified simulation parameters in the HFSS, we have designed and optimized the 910MHz-CPS-type microstrip patch antenna. The designed simulation results of the antenna show that the proposed antenna is very proper for RFID tags with the 910MHz center frequency without via hole in the microstrip patch antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.3
• /
• pp.286-291
• /
• 2013

In this paper, a compact rectenna system is designed using a circular sector antenna with harmonic-rejecting characteristics and a direct impedance matching method. The system is designed with bandpass filtering performed by the harmonic-rejection of the circular sector antenna and without impedance matching circuit for the diodes by the direct impedance matching technique. Therefore, while the rectifying circuit of the proposed system can be implemented without a bandpass filter and a impedance matching circuit, it is integrated on the back side of the antenna using precise fabrication techniques for coaxial feedings without degrading the system performances corresponding to the feeding points. From the experimental results, the optimized rectenna system has presented excellent performances of a conversion efficiency of more than 52 % and a conversion voltages of more than 1.5 V at 2.5 GHz.

• 한국해양학회지
• /
• v.18 no.2
• /
• pp.117-124
• /
• 1983

Pizza's synthetic model, a modified Wiener filter method, was tested to establish the procedure of desirable interpretive wavelet extraction and its application to the marine seismic exploration using several approaches with a real offshore seismic data of the southeast Asia. Noise spectrum acquisition is difficult and any assumptions for it do not produce interpretive wavelets as good as synthetic model result by Piazza (1979). however the resolution could be improved with spiking deconvoultion and following zero phase bandpass filter, and the testing procedure and evaluatttion of results can hopefully contribute in future study and practical evaluation of Piazza's method.