• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.378-381
• /
• 2015

To produce low cost and efficient photovoltaic cells, inorganic-organic lead halide perovskite materials appear promising for most suitable solar cells owing to their high power conversion efficiency. Most recent research showes that formamidinium lead iodide ($FAPbI_3$) with methylammonium lead bromide ($MAPbBr_3$) improves the power conversion efficiency of the solar cell to more than 18 per cent under a standard illumination because incorporated $MAPbBr_3$ makes $FAPbI_3$-relatively unstable but comparatively narrow band gap-more stable composition. In respect to first principle study, we investigated band gap of $MAPbI_3$, $FAPbI_3$, $MAPbBr_3$, $(FAPbI_3)_{0.89}-(MAPbBr_3)_{0.11}$ and 0.615(eV), 0.466, 1.197, 0.518 respectively through EDISON DFT software. These results emphasize enhancing structure stability is important factor as well as finding narrow band gap.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.87-90
• /
• 2002

For the broad band wireless communications system, the composition of the millimeter wave system is needed. In other to commercialize that system, satisfaction of high frequency characteristic and low cost process is required. In this study, BPF which is very sensitive to the characteristic of fine line designed and fabricated using photoimageable thick film technology.

• Korean Journal of Materials Research
• /
• v.32 no.11
• /
• pp.449-457
• /
• 2022

Halide perovskites are emerging materials for next-generation display applications, thanks to their narrow emission linewidth and band gap tunability, capable of covering the entire range of visible light. Despite their short period of research, perovskite light emitting diodes (PeLEDs) have shown rapid progress in device external quantum efficiency (EQE) in the near-infrared (NIR), red, and green emission wavelengths, and the record EQE has exceeded over 20 %. However there has been limited progress with blue emission compared to the red and green counterparts. In this review, the current status and challenges of blue PeLEDs are introduced, and strategies to produce spectrally stable blue PeLEDs are discussed. The strategies include 1) a mixed halide system in the form of 3-dimensional (3D) perovskites, 2) colloidal perovskite nanocrystals and 3) low dimensional perovskites, known as quasi-2D perovskites. In the mixed halide system, previous reports based on the compositional engineering of 3D perovskites to reduce spectral instability (i.e., halide segregation) will be discussed. Since spectral instability issue originate from the mixed halide composition in perovskites, the two other strategies are based on enlarging the band gap with a single halide composition. Finally, the prospects for each strategy are discussed, for further improvement in spectrally stable blue PeLEDs.

• Electrical & Electronic Materials
• /
• v.8 no.6
• /
• pp.744-751
• /
• 1995

This paper describes a study on absorption properties of electromagnetic wave by the composition ratio of Ni-Zn ferrite. Ni-Zn ferrite was composed of 48-52mol% Fe$\_$2/O$\_$3/, 18-22mol% NiO and 26-34mol% ZnO. The sintering of the composition was carried out at 1200.deg. C for 2 hours. Through the experiments, it was found that the resonance phenomenon occured at low frequency range for high permeability and vice versa. In the case of the composition of 49mol% Fe$\_$2/O$\_$3/, 20mol% NiO and 31mol% ZnO, the bandwidth ranged from 0.35GHz to 0.95GHz with the absorption thickness of 10mm. Also, in the case of the composition 51mol% Fe$\_$2/O$\_$3/, 22mol% NiO and 27mol% ZnO, the bandwidth ranged from 0.48GHz to 1.2GHz with the absorption thickness of 6mm.

• Journal of the Korean Ceramic Society
• /
• v.34 no.12
• /
• pp.1227-1234
• /
• 1997

ZnO thin films were prepared by rf-magnetron sputter at various conditions. Crystallinity, microstructure, chemical composition, and optical composition, and optical properties of the films were investigated as functions of substrate temperature (R. T.-50$0^{\circ}C$) an sputter gas (O2/Ar=0-50%). ZnO thin films grown at 50$0^{\circ}C$ with sputter gas of pure argon as well as at R. T. with sputter gas of a mixture of argon & oxygen(O2/Ar=2%) exhibit a strong tendency of (002) preferred orientation, compared with a considerable random orientation at the other conditions. The thin films with (002) preferred orientation has a chemical stoichiometry of Zn/O-1.01, a band gap of 3.3eV, and a packing density of 98% respectively.

• Journal of information and communication convergence engineering
• /
• v.2 no.4
• /
• pp.233-236
• /
• 2004

This paper shows the easy way to composite a music for non-musicians. Namely, only select a chord and put it to special program which called "the chord composition program", and then the composition program creates the rest chords. After doing this process, non-musicians overwrite their own melodies in accordance with created chords. Finally, they can perform their own music with the sound of master-keyboard and other sound sources by using the band-in-a-box program.x program.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.95-98
• /
• 2007

In this paper, we make an analysis of electromagnetic wave absorption properties of $TiO_2$ in W-band. Therefore, we fabricated some samples in different composition ratio of $TiO_2$ and CPE. And the material properties of samples are calculated from S-parameter of samples using $\ell-2\ell$ method. We analyze absorption properties and complex relative permittivitis of samples. As a result, it has verified that absorption properties of sample containing $TiO_2:CPE=70:30wt.%$ have been excelled in W-band.

• Journal of Navigation and Port Research
• /
• v.32 no.5
• /
• pp.349-353
• /
• 2008

In this paper, the EM wave absorber was designed and fabricated for preventing Reader Interference of RFID communication system in UHF band We fabricated several samples in different composition ratios of Amorphous and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability due to composition ratio. The mixing ratio of Amorphous and CPE was searched as 80 : 20 wt.% by experiments and simulation. Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the developed EM wave absorber has a thickness of 4 mm and absorption ability was over 20 dB in frequency range of $860\;MHz{\sim}960\;MHz$. Therefore, it was confirmed that the developed absorber can be used for suppressing RFID reader interference in UHF band.

• Journal of the Korean Vacuum Society
• /
• v.20 no.6
• /
• pp.461-467
• /
• 2011

The valence band maximum and the conduction band miminum of GaAs, GaSb, InAs, and InSb (constituent binaries of the quaternaty alloy $Ga_xIn_{1-x}Sb_yAs_{1-y}$) are calculated by using TB analytical approach method. The band alignment types of their heterojunctions are determined directly from their relative position of band edges (VBM and CBM). For example, the GaAs/InAs, GaAs/InSb, and GaSb/InSb are in a type-I, the GaAs/GaSb in a type-II, and the GaSb/InAs and InSb/InAs in a type-III, respectively. The composition dependent VBM and CBM for the $Ga_xIn_{1-x}Sb_yAs_{1-y}$ alloy are obtained by using the univeral tight binding method. For the alloyed heterojunctions, the band alignments can be controlled by changing the composition which induce a band type transition. For the alloy $Ga_xIn_{1-x}Sb_yAs_{1-y}$ lattice mathced to GaSb, the type-II band alignment in the region of $x{\leq}0.15$ is changed to the type-III in the region of $x{\geq}0.81$. On the other hand, the alloy $Ga_xIn_{1-x}Sb_yAs_{1-y}$ lattice mathced to InAs has the type-II band alignment in the region of $x{\leq}0.15$ and the type-III band alignment in the region of $x{\geq}0.81$, respectively.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.3
• /
• pp.995-1007
• /
• 2019

The purpose of this study was to investigate the effects of 12-week elastic band exercise on body composition, blood lipids and AMPK in 24 elderly female volunteers aged 65-75 years, and they were divided into the combined exercise group(n=12) and the control group(n=12). The elastic band exercise method was to do exercise 3 times a week for 60 minutes per session, 1-4 weeks for low intensity of OMNI-RES 3-4, 5-8 weeks for medium intensity of OMNI-RES 5-6, 9-12 weeks for OMNI-RES 7-8 of high intensity. In order to compare the differences in the groups before and after the elastic band exercise, two-way repeated measures ANOVA was used to verify the interaction between group and time. The difference in the groups of the measured data was paired t-test, the difference between the groups was paired independent t-test, and analysis of covariance ANCOVA was performed to minimize the inter-group error. The statistical significance level of each item was set to .05. As a result, body fat percentage of exercise group significantly decreased (p<.05), and skeletal muscle volume was significantly increased (p<.01). TC, TG and LDL-C were not significantly different between the exercise and control groups, and HDL-C was significantly decreased in the control group (p<.05). AMPK was significantly decreased in the exercise group (p<.001), but there was no significant difference in the control group. According to the covariance analysis to minimize the error of difference between the pre-exercise groups (p<.05), there was significant difference in AMPK of groups after exercise. These results suggest that the 12-week elastic band exercise has a positive effect on the body composition and AMPK of the elderly women.