• 아시안잔디학회지
• /
• 제20권2호
• /
• pp.203-211
• /
• 2006

본 연구는 천연잔디, 인조잔디 및 맨땅 축구장이 축구 경기력에 미치는 영향을 구명하고자 하였다. 천연잔디 축구장은 한지형 잔디(켄터키 블루그래스 80%+퍼레니얼 라이그래스 20%)와 중엽형 한국잔디로 조성된 축구장이며, 인조잔디 축구장은 코니그린 $DV5000^{TM}$으로 조성하였고 맨땅 축구장은 마사토로 조성되었다. 축구 경기력 분석을 위한 볼 구름거리(m)와 수직 볼리바운드(m)는 2005년과 2006년 건국대학교 스포츠과학타운에서 조사하였다. 본 실험에 사용된 공은 한국축구협회(Korea Football Association)에서 공인된 Hummel Air Vision #1을 사용하였고 공기압은 1.0 1bs를 유지하였다. 볼 구름거리는 맨땅 축구장(13.6m) > 인조잔디 축구장(11.4m) > 한지형 잔디축구장(7.8m) > 한국잔디 축구장(4.7m) 순으로 길었다. 또한 볼 구름거리는 잔디의 사용빈도가 적을수록, 잔디의 직립정도가 강할수록, 잔디의 밀도가 높을수록 짧아지는 경향이었다. 수직 볼리바운드 역시 맨땅 축구장(1.0m) > 인조잔디 축구장(0.98m) > 한지형 잔디 축구장(0.68m) > 한국잔디축구장(0.4m) 순으로 높았다. 수직 볼 리바운드는 잔디의 사용빈도가 적을수록, 잔디의 직립정도가 강할수록, 잔디의 밀도가 높을수록 낮아지는 경향이었다. 표준관리가 되는 한지형 잔디 축구장은 조성연수에 따른 볼 구름거리와 수직 볼 리바운드에 미치는 영향이 적었다. 반면 표준 관리가 하지 않은 한국잔디 축구장은 오래 될수록 볼 구름거리는 길어졌고 수직 볼 리바운드 역시 높았다.

• 한국운동역학회지
• /
• 제13권2호
• /
• pp.175-183
• /
• 2003

The purpose of this study was to analyze the kinetic energy of putter head and ball movements during the process of impact. Highly skilled 5 golfers(less than 1 handicap) participated in this study and the target distance was 3 m. Movements of ball and putter head were recorded with 2 VHS video cameras(60 Hz, 1/500 s shutter speed). Small control object($18.5{\times}18.5{\times}78.5\;cm$) was used in this sdtuldy. Analyzing the process of impact, putter was digitized before 0.0835 s and after 0.0835 s of impact. Ball was digitized 0.1336 s after impact. The results showed that the maximum speed was appeared at Impact and prolonged for a while. Contact point of the club head was within 0.7 cm to the z axis. After contacting the club head, the ball was moved above the ground level(slide) and returned to the ground with sliding and rolling. After contacting the ground, the speed of ball was relied on the surface of the ground. During impact, 70% of kinetic energy of club head has been transferred to the ball.

• 한국조경학회지
• /
• 제29권4호
• /
• pp.91-99
• /
• 2001

This study was carried out to investigate the effects of mowing height, rolling, N-fertilizing, and season on green speed(i.e., ball-roll distance) for developing and implementing a program of increasing green speed in Korean golf courses. Data were subjected to multi-regression analysis using SPSSWIN(Statistical Package for the Social Science), which collected from Yong-Pyong golf course greens selected to investigate. The results was as follows. 1) The multi-regression analysis of mowing height, rolling times, and N-fertilizer application rates on spring green speed was as follows; $Y_1$(spring green speed)=4.287+0.155X$_1$(rolling times)-0.131X$_2$(the amount of N-fertilizing)-0.251X$_3$(mowing height). 2) The multi-regression analysis of mowing height, rolling times, and N-fertilizer application rates on summer green speed was as follows; $Y_2$(summer green speed)=4.833-0.423X$_3$(mowing height)+0.146X$_1$(rolling times)-0.107X$_2$(the amount of N-fertilizing). 3) The multi-regression analysis of mowing height, rolling times, and N-fertilizer application rates on fall green speed was as follows; $Y_3$(fall green speed)=4.651-0.383X$_3$(mowing height)+0.142X$_1$(rolling times)-0.103X$_2$(the amount of N-fertilizing). 4) As mowing height was lowered by 1mm, green speed increased by 0.251~0.423m. As rolling times increased by 1(one), green speed increased by0.142~0.15m. As the amount of N-fertilizing increased by 1g/$m^2$, green speed decreased by 0.103~0.131m. The season also affected green speed. In comparison with spring green speed, summer green speed decreased by 0.145m and fall green speed decreased by 0.144m.

• 한국조경학회지
• /
• 제31권3호
• /
• pp.91-106
• /
• 2003

The objective of this study is to present management methods for Korean golf courses to achieve fast green that satisfies international golf tournament standards during an official golf tournament. The results of both the research and the comparative study on putting green management of 24 tournaments hosted in Korea and 12 tournaments hosted in overseas countries in 2002 are as follows: 1. As for the putting greens in Korean and foreign golf courses where official golf tournaments were held, Korean of official golf tournaments were mainly opened in two-green system golf courses contrary to the foreign cases, and the average size of the greens in Korean golf courses was shown to be greater than that of foreign golf courses to some extent, although there was no difference between the types of turf varieties. 2. Results have shown that unlike foreign golf courses, Korean golf courses were managing putting greens by using greens mowers mostly for general (non-tournament) management, and elaborate rolling attempts failed during official tournament flay week because of an insufficient number of rollers to be input. Therefore, Korean golf courses are required to make efforts to secure 21-inch working-behind greens mowers equipped with tournament bedknifes and 11 blades, which is the greens mowing equipment for professional tournaments, and rollers above all things in order to achieve fast green during tournament play week 3. In attempting to achieve green as fast as that of foreign golf courses, Korean golf courses need to consider the method of performing mowing at 3.0mm height or less with greens mowers for professional tournaments. This needs to be done more than two times, followed by a continuous practice of rolling for proper management.

• Tribology and Lubricants
• /
• 제33권3호
• /
• pp.119-125
• /
• 2017

In this study, we perform a numerical analysis to predict the film thickness and lubrication regions for a thrust ball bearing under different operating conditions. Film thinning and replenishment affect the film thickness in starved lubrication. As the inlet meniscus position is brought to the edge of the Hertz contact, the thin film thickness is calculated as starved equation. We use a film replenishment model to determine the recovery film thickness between rolling elements. We use a hydrodynamic model to describe film recovery, that results from the effects of surface tension. In this model, we consider the surface tension gradient in fluid depression as the driving force for fluid recovery. We use Fourier transform method to determine the time-dependent depth of depressed oil. We calculate the change in the central film thickness graphically by using the recovery equation in starved elastohydrodynamic lubrication(EHL) under operating conditions that include numbers of balls, sliding velocity, applied force, and ambient film thickness. We evaluate the degree of starvation by using the distance from the center of the contact area to the meniscus position. Parched lubrication, a phenomenon where the film thickness decreases consistently, occurs at the severe condition. We determine optimal values with respect to the numbers of balls, and sliding velocity. The investigation can contribute to the design operating conditions for proper lubrication.

• 아시안잔디학회지
• /
• 제20권1호
• /
• pp.11-23
• /
• 2006

본 연구는 골프 코스 관리자가 관리 방법에 따른 그린 스피드를 쉽게 예측할 수 있는 정보를 제공하기 위해 롤링, 이슬제거, 그리고 롤링+이슬 제거를 각각 1회 작업 후 깎기 높이의 변화($4.0{\sim}2.5mm$)와 시간 경과($0{\sim}8hr$)에 따른 4가지 유형의 그린스피드 예측 모형을 통한 빠른 그린 관리 방법을 제시하고자 수행하였다. 공 구름 거리 측정 값은 레이크사이드 컨트리 클럽 동코스 연습용 퍼팅 그린[(Creeping bentgrass (Agrosis palustris Huds. 'Penncross')]에서 2001년 10월 18일과 2002년 5월 25일에 하였다. 자료는 SPSS for window Rel. 10.0(SPSS Inc, 2000) 통계 패키지를 이용하여 다중 회귀 분석하였다. 4가지 유형의 그린스피드 예측 모형중, 빠른 그린 관리 방법의 기준을 설명해 줄 수 있는 회귀식은 식4[($Y_4=4.171-0.225{\cdot}X_1-0.038{\cdot}X_2$(여기서 $Y_4$ : 1회 이슬 제거+1회 롤링시 그린 스피드(m), $X_1$ : 깎기 높이($4.0{\sim}2.5mm,\;X_2$) : 시간 경과($0{\sim}8hr$)]이었다. 이 식은 1회 이슬 제거(스펀지 롤러) $\rightarrow$ 3.0mm 이하의 깎기 높이(21인치 11날 보행식 그린모아, 토너먼트 밑날 장착) $\rightarrow$ 1회 롤링(경량 롤러)의 관리 작업을 할 경우 라운드 종료까지도 3.2m이상의 빠른 그린을 얻을 수 있는 것을 예측하였다. 따라서 이런 관리 시스템은 공식 골프 대회를 위한 빠른 그린의 관리의 기준이 될 것으로 기대되어 진다.

• 한국조경학회지
• /
• 제31권1호
• /
• pp.66-77
• /
• 2003

The purpose of this study is to propose a standard putting green management program to prepare fast green suitable for international golf tournaments, and to conform whether the reported green speed model can be applied to the real field situations. The west course of Lakeside Country Club was selected for the case study. This study was initiated on August 1st, 2001 and continued through October 4th, 2001. The results are summarized as follows: 1. Following the long-term schedule, 'penncross' creeping bentgrass turf was mowed at 5.0mm(37days), 4.5mm(8days), 4.0mm(4days), 3.5mm(2days), 3.2mm(2days), 3.0mm(2days), 2.8mm(2days) and the mowing direction was changed daily. Variation of mowing height was reduced to a minimum range. Core aerification with deep tines was applied 19 days prior to the first practice round. Dry sand maintenance was top-dressed 2 times at 1.5mm/$m^2$ on the 17th day and 1.0mm/$m^2$ on the 10th day. Minimum irrigation was applied to keep the turf alive. During the tournament preparation week, dew on the putting greens was removed by using a sponge roller. Following the dew removal, the greens were cut once each morning at a height of 2.8mm. The mower used was the 21 inch working behind mower equipped with a tournament bedknife and 11 reel blades. Following the mowing, the peens were rolled with a light-weight roller in one direction in the morning. Rolling was used as a finishing technique to ensure that the surface was as smooth as possible, and to provide true ball roll and maximum green speed. In conclusion these management practices satisfied the daily green stimpmeter readings required for USGA championship play. 2. During the period of tournament preparation, no damage was observed on the green, but scalping in green edge appeared in about 0.39% of the total area of 18 greens in the west course.

• 아시안잔디학회지
• /
• 제18권1호
• /
• pp.37-46
• /
• 2004

본 연구는 골프코스관리자들이 빠른 그린관리를 위한 장비 사용 계획시 참고가 될 수 있는 기초자료를 제공하고자 그린모아 유형(보행식, 승용식)에 따른 그린스피드 차이, 보행식 그린모아에 장착된 회전날 유형(9날, 11날)에 따른 그린스피드 차이 그리고 롤러 유형(승용식 그린정리기, 경량롤러)에 따른 그린스피드 차이를 비교하였다. 그 결과의 요약은 다음과 같았다. 1. 그린모아 유형(보행식, 승용식)에 따른 그린스피드 차이는 깎기 후 바로 그리고 깎기 후 8시간 경과 뒤에도 보행식 그린모아를 사용한 3.8mm 깎기 처리구가 승용식 그린긴아를 사용한 3.8mm 깎기 처리구에 비해 그린스피드가 빠르게 나타났고 이는 95% 유의수준에서 통계적으로 유의한 결과였다. 따라서 보행식 그린모아가 승용식 그린모아에 비해 빠른 그린 관리에 적합한 장비 유형으로 판단되 었다. 2. 그린모아에 장착된 회전날 유형(9날, 11날)에 따른 그린스피드 차이는 11날 장착 보행식 그린모아를 사용한 3.2mrn 깎기 처리구가 9날 장착 보행식 그린모아를 사용한 3.2mm 깎기 처리구에 비해 그린스피드가 빠르게 나타났고 이는 95% 유의수준에서 통계적으로 유의한 결과였다. 따라서, 11날이 9날보다 빠른 그린관리에 적합한 회전날 유형으로 판단되었다. 3. 보행식 그린모아로 3.0mm로 깎기한 다음이어서 승용식 그린정리기로 1회 롤링한 처리구와 보행식 그린모아로 3.0mm로 깎기한 다음 이어서 경량롤러로 1회 롤링한 처리구간의 그린스피드 차이(다짐후 그린스피드 증가효과)는 95% 유의수준에서 통계적으로 유의하지 못했으나 8시간 경과 뒤에 측정한 두 처리구들의 그린스피드의 차이(다짐후 그린스피드 감소효과)는 95% 유의수준에서 통계적으로 유의한 결과를 나타냈다. 따라서, 경량롤러가 승용식 그린정리기 보다 빠른 그린관리에 적합한 롤러유형으로 판단되었다.