• 방송공학회논문지
• /
• 제15권1호
• /
• pp.112-121
• /
• 2010

분산 동영상 코딩(Distributed Video Coding)은 기존의 동영상 코딩과 다르게 인코더와 디코더 사이의 복잡도 분배가 가능한 새로운 코딩 방식이다. 본 논문에서는 단계적 움직임 예측을 이용하여 인코더와 디코더의 복잡도를 분배하는 방법을 제안한다. 인코더에서는 부분적으로 움직임 예측을 수행하여 그 결과를 디코더로 전송하고, 디코더는 이를 받아 좁혀진 범위 내에서 남은 움직임 예측을 수행하게 된다. 인코더에서 어느 정도 복잡도를 감당할 수 있을 때 인코더와 디코더 사이의 복잡도 분배 비율의 조절이 가능하다. 이를 통해 복잡도 분배 비율과 압축효율과의 상관성을 알아볼 수 있는데, 인코더의 복잡도 상승에 의한 압축효율 향상율이 디코더 복잡도 상승에 의한 압축효율 향상율보다 훨씬 크다는 것을 알 수 있다. 제안 방법을 통해 단말기의 성능이나 채널 상황에 따라 인코더와 디코더 사이의 복잡도를 적응적으로 분배하고 그에 따라 코딩 성능을 조절할 수 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.623-628
• /
• 2000

Since the influence coefficients method in balancing of rotors is developed with the basement of not the principle of rotor system dynamics, but the linear relationshop of between the measuring quantities and the unbalance quantities, field engineers can apply the method without additional understanding on the rotor dynamics. But the influence coefficients method is not robust to the measurement error. This paper proposes a new method for the two plane balancing of rigid rotor, based on the principle of rotor dynamics. And the kit for experiment is made by ourselves, and in order to measure in the same condition with it, we do a experiment three times. And then with the Response of gap sensor, the SNR(Signal and Noise) is compared and analyzed about measuring error between the influence coefficient method, and the new method, and it is proved that the new method is less robust than the influence coefficient method.

• 제어로봇시스템학회논문지
• /
• 제5권8호
• /
• pp.969-976
• /
• 1999

This paper is concerned with the generation of a balancing trajectory for improving the walking performance. The balancing motion has been determined by solving a second -order differential equation. However, this method caused some difficulties in linearizing and approximating the equation and had restrictions on using various balancing trajectories. The proposed difficulties in linearizing and approximating the equation and had restrictions on using various balancing trajectories. The proposed method i this paper is based on the genetic algorithm for minimizing the motins of balancing joints, whose trajectories are generated by the fifth-order polynomial interpolation after planning leg trajectories. The real walking experiments are made on the biped robot IWR-III, developed by our Automatic Control Laboratory. The system has 8 degrees of freedom and the structure of three pitches in each leg, and one roll and one prismatic joint in the balancing joints. The experimental result shows the validity and applicability of the new proposed algorithm.

• 로봇학회논문지
• /
• 제12권2호
• /
• pp.239-247
• /
• 2017

The purpose of this study is to develop a motion generation technique based on a double inverted pendulum model (DIPM) that learns and reproduces humanoid robot (or virtual human) motions while keeping its balance in a pattern similar to a human. DIPM consists of a cart and two inverted pendulums, connected in a serial. Although the structure resembles human upper- and lower-body, the balancing motion in DIPM is different from the motion that human does. To do this, we use the motion capture data to obtain the reference motion to keep the balance in the existence of external force. By an optimization technique minimizing the difference between the motion of DIPM and the reference motion, control parameters of the proposed method were learned in advance. The learned control parameters are re-used for the control signal of DIPM as input of linear quadratic regulator that generates a similar motion pattern as the reference. In order to verify this, we use virtual human experiments were conducted to generate the motion that naturally balanced.

• 산업공학
• /
• 제11권3호
• /
• pp.155-166
• /
• 1998

The productivity and quality are most challenging problems facing all companies. This paper presents a process improvement of the SMPS(switching mode power supply) assembly line through elimination of unnecessary operations, a proper factory layout, motion study, and line balancing techniques. The proposed assembly line increases the productivity by 23.9%, and decrease the proportion of nonconforming items by 48.9%.

• 전기학회논문지
• /
• 제65권2호
• /
• pp.335-341
• /
• 2016

In general, a yawing motion concept is used for the lateral control of one wheel robot where the gimbal system is located horizontally. In this paper, another concept of the vertically located gimbal system is presented for the same purpose. Although the vertical concept undergoes an instability more easily than the horizontal one, the pitching motion of the gyroscopic effect is considered. Firstly, the trade-off relation between two balancing concepts are investigated by comparing the gyroscopic mechanism. Secondly, the dynamic model for the problem of the proposed concept is derived using the oscillatory inverted stick model. Thirdly, the stability of the model is analyzed using the phase trajectory method. Finally, the control performance of the system by a vibration controller is simulated.

• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.89-96
• /
• 2005

This paper is concerned with a balancing motion formulation and control of the ZMP (Zero Moment Point) for a biped-walking robot that has a prismatic balancing weight or a revolute balancing weight. The dynamic stability equation of a walking robot which have a prismatic balancing weight is conditionally linear but a walking robot's stability equation with a revolute balancing weight is nonlinear. For a stable gait, stabilization equations of a biped-walking robot are modeled as non-homogeneous second order differential equations for each balancing weight type, and a trajectory of balancing weight can be directly calculated with the FDM (Finite Difference Method) solution of the linearized differential equation. In this paper, the 3dimensional graphic simulator is developed to get and calculate the desired ZMP and the actual ZMP. The operating program is developed for a real biped-walking robot IWRⅢ. Walking of 4 steps will be simulated and experimented with a real biped-walking robot. This balancing system will be applied to a biped humanoid robot, which consist legs and upper body, as a future work.

• 전자공학회논문지
• /
• 제51권2호
• /
• pp.190-196
• /
• 2014

본 논문에서는 밸런싱 로봇의 동역학적 모델의 해석으로부터 기울기와 조향이 독립되어 있어 서로 영향을 받지 않는 것을 증명하고, 다변수 시스템에 적합한 제어기로써 두 개의 최적 LQR 제어기 구조를 갖는 제어시스템을 제안하였다. 또한 제안한 제어시스템의 성능을 입증하기 위하여 밸런싱 로봇의 자세제어에 적용하여 모의실험과 실험을 수행하였고, PID 제어기와의 비교평가를 통하여 그 우수성을 검증하였다.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.112-121
• /
• 2005

This paper is concerned with smooth trajectory generation of biped robot which has inverted pendulum type balancing weight. Genetic algorithm is used to generate the trajectory of the leg and balancing weight. Balancing trajectory can be determined by solving the second order differential equation under the condition that the reference ZMP (Zero moment point) is settled. Reference ZMP effect on gait pattern absolutely but the problem is how to determine the reference ZMP. Genetic algorithm can find optimal solution under the high order nonlinear situation. Optimal trajectory is generated when use genetic algorithm which has some genes and a fitness function. In this paper, minimization of balancing joints motion is used for the fitness function and set the weight factor of the two balancing joints at the fitness function. Inverted pendulum type balancing weight is very similar with human and this model can be used fur humanoid robot. Simulation results show ZMP trajectory and the walking experiment made on the real biped robot IWR-IV.

• 로봇학회논문지
• /
• 제8권4호
• /
• pp.229-237
• /
• 2013

In this paper, we report a self-balancing robot wheelchair which has the capability of keeping upright posture regardless of the terrain inclination in terms of the three dimensional balancing motion. It has the mobility of five degrees of freedom, where pitching, yawing, and forward motions are generated by the two-wheeled inverted pendulum mechanism and the rolling and vertical motions are implemented by the movement of the tilting mechanism. Several design considerations are suggested for the sliding type vehicle body, wheel actuator module, tilting actuator module, power and control system, and the riding module.