• 한국추진공학회지
• /
• 제18권5호
• /
• pp.19-28
• /
• 2014

핀틀 노즐 기술을 적용한 고체 추진기관의 지상 연소시험을 수행하여 내탄도 성능 해석과 비교하였다. Baffle이 없는 핀틀-노즐 추진기관 시험 결과 초기 압력은 내탄도 성능 해석 결과와 유사하였으나 점진적으로 압력이 증가하는 현상이 나타났다. 또한, 핀틀 주변으로 공급되는 유동을 균일하게 형성하기 위하여 baffle을 추가하여 시험을 수행하였다. 시험 결과 예측되는 압력보다 40% 높은 압력이 측정되었으며 CFD 유동해석을 통하여 baffle에 의한 전압력 손실이 발생하며 10%의 전압력 손실을 고려하여 예측된 연소실 압력이 측정 압력과 유사함을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.71-78
• /
• 2001

It was numerically studied that characteristics of fluid flow and heat transfer in a tube with disk and annular baffle for heat exchanger of condensing boiler. Using a finite volume technique and CFD code, STAR-CD, the governing equations were solved and the temperature and flow fields were investigated. The interval between tube and annular baffle, height and diameter of baffle were selected as important design parameters, and the effects of these parameters on heat transfer and fluid flow were studied. As a result, in the case of with interval, the pressure was decreased but heat transfer was increased. Also heat transfer was slowly increased as the size of disk and annular baffle were increased and the distance between baffles were decreased.

• 대한기계학회논문집B
• /
• 제28권8호
• /
• pp.945-952
• /
• 2004

Acoustic characteristics of combustion chamber having various baffle configurations are numerically investigated by linear acoustic analysis to suggest reliable baffle specifications in first stage of KSLV-I. To determine the configuration of baffles, an acoustic modal analysis as well as the macroscopic analysis has been done. Hub has another effect of suppressing transverse acoustic mode by confining flow in baffled compartment over general effect of increase in acoustic damping of radial acoustic modes. So, a sufficient number of hub needs to be installed to obtain acoustic damping capacity. 3-blade configuration designed to suppress the first tangential mode has relatively low damping capacity, compared to 5 or 6-blade one. Optimum value of axial baffle length has been determined by comparing acoustic characteristics of combustion chamber having various baffle lengths.

• The Journal of the Acoustical Society of Korea
• /
• 제20권2E호
• /
• pp.46-50
• /
• 2001

The characteristics of radiation impedance are analyzed by algorithms which consists of Finite Element Method (FEM) and Hybrid type Infinite Element Method. The changes of radiation impedance for piston source according to the size and the material properties of baffles are studied. The results of the radiation impedance for rigid finite baffle coincide with other reports. The more the material properties of baffle that comes across the acoustic medium, the more the calculation results of radiation impedance approach the ones without baffle. Therefore, these results can be applied to the design and the radiation characteristics analysis of acoustic transducers.

• Structural Engineering and Mechanics
• /
• 제13권6호
• /
• pp.653-670
• /
• 2002

In order to ensure the structural dynamic stability of moving liquid-storage containers, the flow motion of interior liquid should be appropriately suppressed by means of mechanical devices such as the disc-type elastic baffle. In practice, the design of a suitable baffle requires a priori the parametric dynamic characteristics of storage containers, with respect to the design parameters of baffle, such as the installation location and inner-hole size, the baffle number, and so on. In this paper, we intend to investigate the parametric effect of the baffle parameters on the transient dynamic behavior of a cylindrical fuel-storage tank in an abrupt vertical acceleration motion. For this goal, we employ the ALE (arbitrary Lagrangian-Eulerian) kinematic description method incorporated with the finite element method.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 추계학술발표회논문집(1)
• /
• pp.27-32
• /
• 1996

In this study, the boundary element method (BEM) is used to treat the homogenization of the baffle and reflector. First, the multigroup diffusion equations (MDE) within the core are solved using BEM as a source problem under the assumption that the core material is uniformly distributed. Then, the solution to MDE for the water reflector which should be extended infinite can be attained from a boundary source problem also via BEM. Finally, these two solutions are coupled through albedos of the slab-shaped baffle so that one could obtain heterogeneous interface currents and fluxes between the core and the baffle/reflector resulting in the location-dependent equivalent parameters for the baffle/reflector.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.98-103
• /
• 2003

This paper presents phenomena of vibration and noise due to acoustic resonance in tube bank of a HRSG. Acoustic resonance is may arise when the vortex shedding frequency coincides with the acoustic natural frequency. At this tube bank, dominant frequencies of vibration in this system were 43.5, 67.5㎐. The 3$\^$rd/ acoustic natural frequency calculated was 68.5㎐. When the difference of vortex shedding frequency and acoustic natural frequency is within ${\pm}$20%, acoustic resonance could occur. In this system, in order to prevent acoustic resonance, acoustic baffle was installed in the tube bank before operating. But acoustic resonance occurred. So, we evaluate the effect of acoustic mode due to baffle extension length. After investigating, we did revise acoustic baffle to eliminate acoustic resonance effectively.

• Journal of Mechanical Science and Technology
• /
• 제15권11호
• /
• pp.1555-1562
• /
• 2001

In a conventional shell-and-tube heat exchanger, fluid contacts with tubes flowing up and down in a shell, therefore there is a defect in the heat transfer with tubes due to the stagnation portions . Fins are attached to the tubes in order to increase heat transfer efficiency, but there exists a limit. Therefore, it is necessary to improve heat exchanger performance by changing the fluid flow in the shell. In this study, a highly efficient shell-and-tube heat exchanger with spiral baffle plates is simulated three-dimensionally using a commercial thermal-fluid analysis code, CFX4.2. In this type of heat exchanger, fluid contacts with tubes flowing rotationally in the shell. It could improve heat exchanger performance considerably because stagnation portions in the shell could be removed. It is proved that the shell-and-tube heat exchanger with spiral baffle plates is superior to the conventional heat exchanger in terms of heat transfer.

• 설비공학논문집
• /
• 제22권9호
• /
• pp.599-604
• /
• 2010

Because shell and tube heat exchanger is widely used in industry, extensive research work is going on to improve the thermal efficiency and to understand the key design parameters. In this study, the main design parameters of the baffle, depending on the height and number of baffle for heat recovery are being studied. Numerical results are in good agreement with the experimental results with a slight discrepancy of 3%, which is quite resonable. The heat transfer rate and pressure drop increase depending on increasing of number of baffles and baffle height, but increase of the heat transfer rate is limited due to contact area with the tube, flow separation, fluid residual time, turbulence and velocity.

• Journal of Korean Vacuum Science & Technology
• /
• 제5권1호
• /
• pp.25-32
• /
• 2001

Baffles have been used in cryopumps to prevent 300 K thermal radiation from reaching freely cryopanels whose temperature must be kept steadily below certain levels(4 K, 20 K or something) depending on the gas to be pumped. There are two conflicting requirements in designing a baffle such that the transmission of particles(gas molecules) should be maximized, while that of the thermal radiation(photons) minimized. The transmission probability of gas molecules or photons through chevron type baffles, influenced by the detailed geometry of blades, the reflection mode, and the absorption property of the surface, was analyzed parametrically. The effects of geometrical discrepancy between the fabricated baffle and the designed one, resulting in unexpected deterioration in the performance of the baffle, were also investigated by taking into account the gaps(or overlaps) between the baffle blades and the asymmetry in the blade arms.