• Journal of computational fluids engineering
• /
• v.11 no.2 s.33
• /
• pp.25-31
• /
• 2006

A two-dimensional backward facing step flow is simulated by using URANS and Detached Eddy Simulations(DES) approaches. Turbulence models adopted for URANS and DES simulations are Spalart-Allmaras(S-A) model and Shear Stress Transport(SST) model. The target flow with ER=1.125, $Re_H=37,500$ is experimentally studied by Driver & Seegmiller. Various versions of DES have been tested in this paper. Results of the simulations are compared with the experimental data available to evaluate the merits and demerits of URANS and several versions of DES. URANS simulation converges to a steady state and hence unsteady characteristics are not featured. DES simulations in general successfully mimic large scale structures and oscillation characteristics of the flow.

• Transactions of Materials Processing
• /
• v.3 no.3
• /
• pp.291-301
• /
• 1994

In the simultaneous forward-backward extrusion the effects of some process variables including area reduction, stroke advance, materials(Al 2024 and commercial pure copper) on the extrusion load, plastic flow and height ratio of upper to lower extruded parts are experimentally investigated and analyzed. Grid-marking technique is employed to visualize the plastic flow. The influence of using split and original specimen on the extrusion load and height ratio is evaluated by experiments. Experimental results show that the plastic flow if oriented to the part of lower area reduction in the begining but it is usually variated during the overall process. The configurations of plastic deformation and plastic flow are dependent on the working materials and the lubricational conditions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.85-92
• /
• 2004

As a research to develop a SCRAM jet engine is actively conducted, a necessity to produce a high-enthalpy flow in a laboratory is increasing. In order to develop the SCRAM-jet engine, stabilized combustion in a supersonic flow-field should be attained, in which a duration time of flow is extremely short. Therefore, a mixing process of breathed air and fuel, which is injected into supersonic flow-fields is one of the most important problem. Since, the flow inside SCRAM jet engine has high-enthalpy, an experimental facility is required to produce such high-enthalpy flow-field. In this study, a detonation-driven shock tunnel was built and was used to produce high-enthalpy flow. Further-more, SCRAM jet engine model equipped backward-facing step was installed at test section and flow-fields were visualized using color-schlieren technique and high speed video camera. The fuel was injected perpendicular to the flow of Mach number three behind backward-facing step. The height of the step, distance of injection and injection pressure were changed to investigate the effects of step on a mixing characteristic between air and fuel. The schlieren photograph and pressure histories show that the fuel was ignited behind the step.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1993.10a
• /
• pp.55-61
• /
• 1993

An experimental investigation was conducted in order to determine the flammability limit of the solid fuel ramjet using the backward facing step flow combustion of the plexiglass grain. In order to get the different step height ratio, the grain was drilled straight forward or stepwise. The Phoenics computer code was adopted in order to compare. the flow patterns of the some sample tests using a non-reacting cold turbulent flow model. The stepwise grain give some loading advantage; specially thin and long shape grain design.

• Journal of computational fluids engineering
• /
• v.9 no.1
• /
• pp.10-17
• /
• 2004

Comprehensive investigation according to the two kinds of blades is systematically carried out for a design of the centrifugal blower. The motivation of this work is due to demand of enhanced flow rate with higher inlet pressure, such as air purifiers adopting several filters. It is observed that flow rate of the blower with forward blades is larger than that of the system with backward blades. The reason is due to larger outlet velocity from the rotating forward blades and the tendency is validated by a parallel experiment with a wind tunnel. Numerical analysis for the blower system shows detail information between the blades and inside the casing. A series of figures to show the flow details offers deep understanding of a centrifugal blower with the two different blades.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.1
• /
• pp.1-10
• /
• 1994

The flow and heat transfer characteristics behind a backward facing step located in a vertical channel has been studied. In this study, the numerical prediction has been performed by solving the Navier-Stokes equation and energy equation simultaneously with the SIMPLE algorithm embedied in TEACH code. Local heat flux was measured by using Schlieren Interferometer. The flow visualization was performed using the cylindrical lens and the laser beam that is scattered by the supplied glycerine particles. The velocity and temperature distributions, recirculation region, reattachment length, and local heat flux are obtained under the various parameters to investigate the buoyancy effect on the flow and heat transfer characteristics behind the step.

• Transactions of Materials Processing
• /
• v.12 no.3
• /
• pp.251-258
• /
• 2003

The paper deals with an analysis of an extrusion process with a divided material flow in a combined radial - backward extrusion. The paper discusses the influences of tool geometry such as punch nose angle, relative gap height, die comer radius on material flow and surface expansion into can and flange region. To analyze the process, numerical simulations by the FEM and experiment, an Al alloy as a model material have been performed. Based on the results, the influence of design parameters on the distribution of divided material flow and surface expansion are obtained.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.214-219
• /
• 1998

Analytic and experimental methods have been used for the characterization of flow behavior of semi-solid Al2024 alloy. Backward extrusion experimnet was chosen to avoid the crack on the unconstrained surface. The material constants for the flow stress by the upper bound technique that agreed with experimental results were determined. The various material constants obtained for al temperature range above the solidus temperature have been fitted and represented in the function of temperature and solid fraction. The obtained result has good agreement only in the high solid fraction.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.9
• /
• pp.2297-2307
• /
• 1995

An experimental study on the structure of a separated shear layer downstream of the backward-facing step has been performed by examining mean flow and turbulent quantities in terms of free stream turbulence. When free stream turbulence exists, the entrainment rate of the separated shear layer and the flow rate in the recirculation region are enhanced, resulting in shorter reattachment length. The production and diffusion terms in the turbulent kinetic energy balance are shown to increase more than the dissipation term does. Rapid decrease of the pressure-strain term in the shear stress balance implies the enhancement of the three-dimensional motion by free stream turbulence.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.10
• /
• pp.840-845
• /
• 2012

An ARX(Auto-Regressive eXogenous) modeling technique for vortex dynamics in the BFS(Backward Facing Step) flow field is proposed in this paper. In order for the modeling of the dynamics, the spatial and temporal modes are extracted through POD(Proper Orthogonal Decomposition) analysis. Determining the orders of the inputs and outputs for an ARX structure is carried out by the spectrum analysis and temporal mode analysis, respectively. The order of input delay terms is also determined by the flow velocity. Finally the coefficients of the ARX model are designed by using an artificial neural network.