• 대한전자공학회논문지SP
• /
• 제48권4호
• /
• pp.38-48
• /
• 2011

Backlight Profile과 Image Pixel의 Homogeneity 분석을 통한 Block 단위 LCD Backlight Nonideality 및 Crosstalk Compensation 방안이 제안되었다. Image에 따라 Block Size 및 연산에서 제외되는 Block 범위 그리고 연산에 고려되는 Backlight 범위를 최적화하여, 화질을 유지하면서 연산량을 최소화시켰다. 실제 영상을 바탕으로 하는 Simulation을 통해 제안된 Compensation 연산량과 화질이 평가되었다.

• 한국멀티미디어학회논문지
• /
• 제22권8호
• /
• pp.860-873
• /
• 2019

LCD backlight boosting and the integration of boosting and dimming are proposed based on image analysis to maximize perceptual image qualities and to reduce display system power. Based on the histogram of the image data, methods for selecting an image suitable for boosting and for adjusting the optimum backlight brightness are proposed. A comprehensive combined optimization method of LCD backlight boosting, dimming and bypass based on image characteristics is also described. Perceptual image quality enhancement and power consumption are evaluated based on well known image databases. Average subjective image quality is improved by 24.8%, RMS contrast is improved more than 20%, and average power consumption is reduced by 15.94% compared to conventional uniform boosting.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.972-974
• /
• 2009

This paper presents smart regional contrast enhancement technique of partitioned image for local dimming backlight on small-sized mobile display to reach two goals. One is to save the power consumption, and the other to improve contrast ratio of display image. Recently new advanced method is proposed, named local dimming method, that backlight LED is positioned on backside of the display panel. So it is important to partition an image by sub blocks and then post-processing independantly. This means regional contrast enhancement. After partitioning, we compare the mean luminance(Y) value of each sub-block image with the one of original whole image. If some blocks have the mean value lower than the one of whole image, they are processed with the proposed method and others are bypassed. Simultaneously the information of the processed blocks are transferred to BLC(Backlight LED Controller). And then the supply current of each backlight LED is reduced to realize the contrast ratio enhancement and at the same time to power consumption reduction. In addition, we verify this proposed method is free from blocking artifacts.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.791-794
• /
• 2004

In this article, we present a method to measure precisely the performances of direct-lit CCFL backlights using a luminance meter and dedicated image analysis software. The array of CCFL tubes alone can be measured directly and the luminance of each tube can be extracted along its main dimension. So, comparison of the different tubes on the same backlight can be made easily and the performances in terms of backlight uniformity improved. The influence of the diffuser sheet can be probed in the same way and the homogeneity of the entire surface of the backlight can be automatically extracted and quantified.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.709-712
• /
• 2017

극저온 액체 질소가 초임계 상태에서 분사될 때 역광기법(backlight method)을 이용하여 사진을 얻었다. 이 때, 유체의 온도를 함께 측정하였고, 이를 바탕으로 가짜 감압비등이라는 새로운 분열기구를 제안하고자 하였으나, 역광기법은 정성적인 분무의 외관은 보여주지만 분사되는 유체의 큰 밀도로 인하여 밀도 변화를 보여줄 수 없었다.

• Journal of Information Display
• /
• 제11권4호
• /
• pp.173-181
• /
• 2010

In this paper, light-emitting-diode (LED) backlight driving circuits and dimming method for medium-sized and large liquid crystal displays (LCDs) are proposed. The double loop control method, the intelligent-phase-shifted PWM dimming method, the fast-switching current regulator, and the current matching techniques are proposed to improve not only the current regulation characteristics and the power efficiency but also the current matching characteristics and the transient response of the LED current. The brightness of the backlight using the proposed local dimming method was determined from the histogram of the local block to reduce the power consumption of the backlight without image distortion. The measured maximum power efficiency of the LED backlight driving circuit for medium-sized LCDs was 90%, and the simulation results showed an 88% maximum power efficiency of the LED backlight driving circuit for large LCDs. The maximum backlight power-saving ratio of the proposed dimming method was 41.7% in the simulation with a high-contrast image. The experiment and simulation results showed that the performance of LEDs as LCD backlight units (BLUs) improved with the proposed circuits and method.

• 반도체디스플레이기술학회지
• /
• 제7권2호
• /
• pp.29-33
• /
• 2008

LCD panels are increasingly used to show moving image material, for example in LCD television sets. However, moving images become blurred on LCD panels. One of the causes of motion blur is the slow reaction of LC(liquid crystal) cell to change in the pixel value. Another cause of motion blur is the hold-type characteristic of the LCD panel, during the frame time the image is shown continuously. This type of motion blur can be reduced with a scanning backlight. We have designed and fabricated a scanning backlight system that solves the hold-type characteristic problem in a way that Flat fluorescent lamp divided 6 blocks was scanned 60Hz.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1316-1318
• /
• 2009

Nonideality of LED lens and diffuser as well as crosstalk between backlights should be compensated because they have large effects on image qualities. The computation complexities of conventional compensations are greatly increased as resolution becomes higher. The block based compensation is proposed to alleviate the computation complexity considering backlight profiles and image pixel characteristics.

• 전기학회논문지P
• /
• 제62권2호
• /
• pp.90-94
• /
• 2013

In this paper, we propose a new algorithm to improve the contrast ratio, to preserve information of bright regions and to maintain the color of backlight image that appears with a great relative contrast. Backlight images of the natural environment have characteristics for difference of local brightness; the overall image contrast improvement is not easy. To improve the contrast of the backlight images, MSR (Multi-Scale Retinex) algorithm using the existing multi-scale Gaussian filter is applied. However, existing multi-scale Gaussian filter involves color distortion and information loss of bright regions due to excessive contrast enhancement and noise because of the brightness improvement of dark regions. Moreover, it also increases computational complexity due to the use of multi-scale Gaussian filter. In order to solve these problems, a linear MSR is performed that reduces the amount of computation from the HSV color space preventing the color distortion and information loss due to excessive contrast enhancement. It can also remove the noise of the dark regions which is occurred due to the improved contrast through edge preserving filter. Through experimental evaluation of the average color difference comparison of CIELAB color space and the visual assessment, we have confirmed excellent performance of the proposed algorithm compared to conventional MSR algorithm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1559-1560
• /
• 2007

BGR mixture phosphor pumped by 400 nm is developed for white-light-emitting diode of liquid crystal display backlight. White-emitting phosphor is prepared by mixing $Ba_2SiO_4:Eu^{2+}$ and $(Ba,Sr)_3MgSi_2O_8:Eu^{2+},Mn^{2+}$ phosphors.