• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.2
• /
• pp.279-299
• /
• 2019

Recently occurred earthquake Gyeongju and Pohang served as a momentum to remind that Korean peninsular is not a safety zone from earthquake anymore. The importance of seismic design, therefore, have been realized and researches regarding design response spectrum have been actively carried out by many researchers and engineers. Current tunnel seismic design method is conducted to check safety of tunnel structure by dynamic numerical analysis with condition of completed lining installation, so, it is impossible to consider safety of tunnel behavior under construction. In this study, therefore, dynamic numerical analysis considering seismic wave propagations has been performed after back analysis using results from field monitoring of tunnel under construction in fractured zone and 1st reinforcement (shotcrete, rockbolt) behaviour are analyzed. Waves are classified by period characteristic (short and long). As a result, the difference depending on period characteristic is minor, and increasements of displacement are obtained at crown displacement due to seismic wave is 28~31%, 14~16% at left side of tunnel in the fractured zone, 13~27% at right side of tunnel in the bed rock, respectively. In case of shotcrete axial force is increased 113~115% at tunnel crown, 102% at left side, 106~110% at right side, respectively. Displacement and axial force of rockbolts which are selected by type of anchored grounds (only fractured zone, fractured zone and bed rock, only bedrock) are analyzed, as a result, rockbolt which is anchored to fractured zone and bed rock at the same time are weaker than any other case.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.166-179
• /
• 1999

Apical sealing is essential for the success of surgical endodontic treatment. Root-end cavity is apt to be contaminated with moisture or blood, and is not always easy to be dried completely. The purpose of this study was to evaluate the influence of dry methods of retrocavity on the apical seal in endodontic surgery. Apical seal was investigated through the evaluation of apical leakage and adaptation of filling material over the cavity wall. To investigate the influence of various dry methods on the apical leakage, 125 palatal roots of extracted human maxillary molar teeth were used. The clinical crown of each tooth was removed at 10 mm from the root apex using a slow-speed diamond saw and water spray. Root canals of the all the specimens were prepared with step-back technique and filled with gutta-percha by lateral condensation method. After removing of the coronal 2 mm of filling material, the access cavities were closed with Cavit$^{(R)}$. Two coats of nail polish were applied to the external surface of each root. Apical three millimeters of each root was resected perpendicular to the long axis of the root with a diamond saw. Class I retrograde cavities were prepared with ultrasonic instruments. Retrocavities were washed with physiologic saline solution and dried with various methods or contaminated with human blood. Retrocavities were filled either with IRM, Super EBA or composite resin. All the specimens were immersed in 2% methylene blue solution for 7 days in an incubator at $37^{\circ}C$. The teeth were dissolved in 14 ml of 35% nitric acid solution and the dye present within the root canal system was returned to solution. The leakage of dye was quantitatively measured via spectrophotometric method. The obtained data were analysed statistically using one-way ANOVA and Duncan's Multiple Range Test. To evaluate the influence of various dry methods on the adaptation of filling material over the cavity wall, 12 palatal roots of extracted human maxillary molar teeth were used. After all the roots were prepared and filled, and retrograde cavities were made and filled as above, roots were sectioned longitudinally. Filling-dentin interface of cut surfaces were examined by scanning electron microscope. The results were as follows: 1. Cavities dried with paper point or compressed air showed less leakage than those dried with cotton pellet in Super EBA filled cavity (p<0.05). However, there was no difference between paper point- and compressed air-dried cavities. 2. When cavities were dried with compressed air, dentin-bonded composite resin-filled cavities showed less apical leakage than IRM- or Super EBA-filled ones (p<0.05). 3. Regardless of the filling material, cavities contaminated with human blood showed significantly more apical leakage than those dried with compressed air after saline irrigation (p<0.05). 4. Outer half of the cavity showed larger dentin-filling interface gap than inner half did when cavities were filled with IRM or Super EBA. 5. In all the filling material groups, cavities contaminated with blood or dried with cotton pellets only showed larger defects at the base of the cavity than ones dried with paper points or compressed air.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.3
• /
• pp.1-13
• /
• 2009

Alkalinity and total carbon contents were measured by acid neutralizing titration (ANT), back titration (BT), gravitational weighing (GW), non-dispersive infrared-total carbon (NDIR-TC) methods for assessing precision and accuracy of alkalinity and total carbon concentration in $CO_2$-rich water. Artificial $CO_2$-rich water(ACW: pH 6.3, alkalinity 68.8 meq/L, $HCO_3^-$ 2,235 mg/L) was used for comparing the measurements. When alkalinity measured in 0 hr, percent errors of all measurement were 0~12% and coefficient of variation were less than 4%. As the result of post-hoc analysis after repeated measure analysis of variance (RM-AMOVA), the differences between the pair of methods were not significant (within confidence level of 95%), which indicates that the alkalinity measured by any method could be accurate and precise when it measured just in time of sampling. In addition, alkalinity measured by ANT and NDIR-TC were not change after 24 and 48 hours open to atmosphere, which can be explained by conservative nature of alkalinity although $CO_2$ degas from ACW. On the other hand, alkalinity measured by BT and GW increased after 24 and 48 hours open to atmosphere, which was caused by relatively high concentration of measured total carbon and increasing pH. The comparison between geochemical modeling of $CO_2$ degassing and observed data showed that pH of observed ACW was higher than calculated pH. This can be happen when degassed $CO_2$ does not come out from the solution and/or exist in solution as $CO_{2(g)}$ bubble. In that case, $CO_{2(g)}$ bubble doesn't affect the pH and alkalinity. Thus alkalinity measured by ANT and NDIR-TC could not detect the $CO_2$ bubble although measured alkalinity was similar to the calculated alkalinity. Moreover, total carbon measured by ANT and NDIR-TC could be underestimated. Consequently, it is necessary to compare the alkalinity and total carbon data from various kind of methods and interpret very carefully. This study provide technical information of measurement of dissolve $CO_2$ from $CO_2$-rich water which could be natural analogue of geologic sequestration of $CO_2$.

• The Journal of Korean Society for Radiation Therapy
• /
• v.23 no.2
• /
• pp.91-96
• /
• 2011

Purpose: The aim of study is to expose a more uniform dose depending on the relationship between a body mass index in patients who underwent radiation therapy and an acquired dosimetric information by using a thermoluminescent dosimeter. Materials and Methods: Since 2006 to August 2011 we investigated 28 people who underwent radiation therapy were enrolled in AMC. Each patient was measured on the head, neck, chest, abdomen, pelvis, thigh, knee joint, and ankle joint using the thermoluminescent dosimeter. The measurement value of each points compared with the prescribed center point, abdominal point, and dose measurements of points on which to base the abdomen and the patient's body mass index (BMI) were compared with reference point, abdomen dose. Results: 28 patients on prescribed dose in the abdomen by which the center point, an average dose was $100.6{\pm}5.5%$, and the other seven measuring points with the average maximum difference among the head, neck, chest, pelvic, thigh, knee, and ankle were $92.8{\pm}4.2%$, $97.6{\pm}6.2%$, $96.4{\pm}5.5%$, $102.6{\pm}5.3%$, $103.4{\pm}7.9%$, $95.8{\pm}5.9%$, $96.1{\pm}5.5%$. The relationship of abdominal point dose and the patient's body mass index (BMI) was analyzed a scatter plot, and the result of linear relationship analysis by regression method, the regression of the dose (y) was -1.009 BMI (x) plus 123.3 and coefficient of determination ($R^2$) was represented 0.697. Conclusion: The total body irradiation treatment process was evaluated the dose deviation and then the prescribed dose by which the average abdominal dose was satisfied with $100.6{\pm}5.5%$. Results of the relationship analysis between BMI and dose, if we apply the correction value for each patients, it can be achieved more uniform dose delivery.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.148-155
• /
• 2002

Multithreaded models improve the efficiency of parallel systems by combining inner parallelism, asynchronous data availability and the locality of von Neumann model. This model executes thread code which is generated by compiler and of which quality is given by the method of generation. But multithreaded models have the demerit that execution model is restricted to a specific platform. On the contrary, Java has the platform independency, so if we can translate from threads code to Java bytecode, we can use the advantages of multithreaded models in many platforms. Java executes Java bytecode which is intermediate language format for Java virtual machine. Java bytecode plays a role of an intermediate language in translator and Java virtual machine work as back-end in translator. But, Java bytecode which is translated from multithreaded models have the demerit that it is not secure. This paper, multhithread code whose feature of platform independent can execute in java virtual machine. We design and implement translator which translate from thread code of multithreaded code to Java bytecode and which check secure problems from Java bytecode.

• The Korean Journal of Physiology
• /
• v.2 no.2
• /
• pp.101-135
• /
• 1968

As physical fitness measured was muscle strength (hand grips, leg extention, back lift, and arm pull and thrust), skinfold thickness (5 different sites), circulatory function (resting heart rate and blood pressure), speed (kinesiological analysis during 100m sprint, record, maximal and final speed), motor function (50 meter dash, ball throwing, standing broad jump, and pull-ups), maximal aerobic power (maximum oxygen intake by field running method), muscle power (leg and arm by inertia ergometer), and general endurance (maximum endurance running time on the treadmill at the speed of 5 MPH and grade of 15.5%) of 1131 Korean children (boys 572, girls 559) aged of 6 to 17 years, who were randomly sampled from 24 primary, middle and high schools at the two districts of Seoul and KyungKi. The results are summarized as follows: 1) The status (height and weight) of the children was almost same as that of the previously reported Korean and Japanese children of same ages. 2) Muscle strength was a gained linearly with geting age in the boys and girls but there was a little improvement in girls aged of 13 years or more. 3) The mean skin fold thickness was increased linearly with geting ages in both sexes, but the girls from 12 to 17 years of age were increased rapidly, and maximum value was 17mm, while boys was 7.0 mm. 4) In the circulatory function, the resting heart rate was decreased, but the blood pressure was increased with ages in both sexes within the normal limits. 5) The maximum and final speed during 100 meter sprint increases with age in boys but girls who are 12 years old or older, were not improved any mere. The patterns of running were same in both sexes, and maximum speed reached at about 30 meters from starting line. 6) The motor function was increased with age in both sexes, but there was no improvement in 12 years of age or older girls. More over records of all functions except standing broad jump was less than those of Japanese in the same age, respectively. 7) The maximum oxygen intake (MOI) was increased considerably with ages and maximum values were 2.93 L/min (boys) and 2.09 L/min (girls) at the age of 17years. This result was almost same as that of the Japanese and Easter Island population, but the value was lower than that of Europe. The average of the maximum oxygen intake per kg body weight per minute from 9 to 17 years of age were around 53 ml in the boys and 42 ml in the girls. 8) Muscle power was increased linearly with ages in boys while there was relatively a little increment in girls. The maximum values of leg muscle in boys and girls at the 17 years of age were 0.168 and 0.088 horse power, respectively. 9) The maximum endurance running time was increased considerably from the age of 9 in boys, while there was no improvement in girls. The maximum values were 6.0 min and 1.8 min, respectively.

• Korean Journal of Agricultural Science
• /
• v.32 no.2
• /
• pp.205-214
• /
• 2005

The purpose of this study was to investigate the effect of ground corn as an additive to ginseng residue silages. The silages were made with corn (CS), red ginseng (GS), red ginseng residue +0.5% ground corn (GS0.5), w/w bases, red ginseng residue+1.0% ground corn (GS1.0) and red ginseng residue+silage inoculant, lactic acid bacteria (GSL). The raw materials were cut only for corn forage in 2cm length. The ginseng residue without cutting were mixed without or with additives, ground corn and inoculant, and ensiled each into two 2,000ml glass bottles. The bottles with silages were stored at a dark place at room temperature and formented for 60 days. The crude protein contents were higher for all red ginseng silages as 17.7, 18.8, 18.3 and 17.8% for GS, GS0.5, GS1.0 and GSL than that of corn silage as 8.8% (p<0.05). The calcium content were higher in GS, GS0.5, GS1.0 and GSL as 0.99, 1.13, 0.99 and 1.03% than that in CS as 0.31% (p<0.05). The pH of silages fermented for 60 days was similar each other; CS, GS, GS0.5, GS1.0 and GSL as 3.8, 3.7, 3.3, 3.5 and 3.7, respectively. However the pH of GS0.5 was the lower than that of corn silage. The total concentration of volatile fatty acids were higher for CS as 87.3 mM/dl than those of GS, GS0.5, GS1.0 and GSL as 44.7, 37.8, 46.3 and 47.2 nM/dl. However, the percentage of lactic acid concentration of ginseng silages such as GS, GS0.5, GS1.0 and GSL, 60.2, 77.2, 83.4 and 77.3% was higher than that in CS, 53.7% (p<0.05). The in vivo dry matter digestibilities for 72hr fermentation was higher in ginseng silages (GS, GS0.5, GS1.0 and GSL as 76.5, 75.8, 72.9 and 77.3%, respetively) than that in for CS as 52.1% (p<0.05). It can be concluded that silage added with ground corn (GS0.5 and GS1.0) and lactic acid inoculant were high in its quality, and the GS0.5 can be suggested as a practical method for red ginseng residues silage making.

• Progress in Medical Physics
• /
• v.26 no.1
• /
• pp.28-35
• /
• 2015

In this study, we investigated the effects of an iterative reconstruction algorithm and an automatic exposure control (AEC) technique on image quality and radiation dose through phantom experiments with coronary computed tomography (CT) angiography protocols. We scanned the AAPM CT performance phantom using 320 multi-detector-row CT. At the tube voltages of 80, 100, and 120 kVp, the scanning was repeated with two settings of the AEC technique, i.e., with the target standard deviations (SD) values of 33 (the higher tube current) and 44 (the lower tube current). The scanned projection data were reconstructed also in two ways, with the filtered back projection (FBP) and with the iterative reconstruction technique (AIDR-3D). The image quality was evaluated quantitatively with the noise standard deviation, modulation transfer function, and the contrast to noise ratio (CNR). More specifically, we analyzed the influences of selection of a tube voltage and a reconstruction algorithm on tube current modulation and consequently on radiation dose. Reduction of image noise by the iterative reconstruction algorithm compared with the FBP was revealed eminently, especially with the lower tube current protocols, i.e., it was decreased by 46% and 38%, when the AEC was established with the lower dose (the target SD=44) and the higher dose (the target SD=33), respectively. As a side effect of iterative reconstruction, the spatial resolution was decreased by a degree that could not mar the remarkable gains in terms of noise reduction. Consequently, if coronary CT angiogprahy is scanned and reconstructed using both the automatic exposure control and iterative reconstruction techniques, it is anticipated that, in comparison with a conventional acquisition method, image noise can be reduced significantly with slight decrease in spatial resolution, implying clinical advantages of radiation dose reduction, still being faithful to the ALARA principle.

• Journal of Animal Science and Technology
• /
• v.46 no.6
• /
• pp.947-956
• /
• 2004

The primary role of lipoprotein lipase(LPL) is the hydrolysis of triglycerides(TG) from the core of triglyceride-rich lipoproteins such as chylomicrons and very low density lipoproteins in plasma. Fatty acids liberated by LPL on capillary endothelial surfaces are available for tissues as energy sources especially in muscles or for storage in the form of TG in adipose tissues. Therefore, as the candidate gene related to the carcass traits of the beef cattle, we have directly sequenced the exon 5${\sim}$exon 6 region in the bovine LPL gene for discovery of single nucleotide polymorphism(SNP) with 24 unrelated Hanwoo(Korean cattle). Novel eight sequence variants were detected: three loci on exon 5, three on intron 5 and two on exon 6. All SNPs identified were strongly linked each other, and one hundred twenty eight Hanwoo samples were genotyped one SNP on intron 5 using PCR-restriction fragment length polymorphism method by digestion with Hae III restriction enzyme. The allele frequency of the polymorphism was 0.76 and 0.24. The effects of this polymorphism on the breeding values of the carcass weight, loin muscle area, back fat thickness and marbling score were analyzed using least square methods of SAS GLM. The marbling score of BB genotype was significantly higher than those of AA and AB genotypes(P<0.05). This result indicates that this polymorphism may be associated with the variation of marbling score. Further study is warranted to investigate the phenotypic association in Hanwoo.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.83-95
• /
• 2018

Purpose : After planning the Respiratory Gated Radiotherapy for Lung cancer, the movement and volume change of sparing normal structures nearby target are not often considered during dose evaluation. This study carried out 4-D dose evaluation which reflects the movement of normal structures at certain phase of Respiratory Gated Radiotherapy, by using Deformable Image Registration that is well used for Adaptive Radiotherapy. Moreover, the study discussed the need of analysis and established some recommendations, regarding the normal structures's movement and volume change due to Patient's breathing pattern during evaluation of treatment plans. Materials and methods : The subjects were taken from 10 lung cancer patients who received Respiratory Gated Radiotherapy. Using Eclipse(Ver 13.6 Varian, USA), the structures seen in the top phase of CT image was equally set via Propagation or Segmentation Wizard menu, and the structure's movement and volume were analyzed by Center-to Center method. Also, image from each phase and the dose distribution were deformed into top phase CT image, for 4-dimensional dose evaluation, via VELOCITY Program. Also, Using $QUASAR^{TM}$ Phantom(Modus Medical Devices) and $GAFCHROMIC^{TM}$ EBT3 Film(Ashland, USA), verification carried out 4-D dose distribution for 4-D gamma pass rate. Result : The movement of the Inspiration and expiration phase was the most significant in axial direction of right lung, as $0.989{\pm}0.34cm$, and was the least significant in lateral direction of spinal cord, as -0.001 cm. The volume of right lung showed the greatest rate of change as 33.5 %. The maximal and minimal difference in PTV Conformity Index and Homogeneity Index between 3-dimensional dose evaluation and 4-dimensional dose evaluation, was 0.076, 0.021 and 0.011, 0.0 respectfully. The difference of 0.0045~2.76 % was determined in normal structures, using 4-D dose evaluation. 4-D gamma pass rate of every patients passed reference of 95 % gamma pass rate. Conclusion : PTV Conformity Index was more significant in all patients using 4-D dose evaluation, but no significant difference was observed between two dose evaluations for Homogeneity Index. 4-D dose distribution was shown more homogeneous dose compared to 3D dose distribution, by considering the movement from breathing which helps to fill out the PTV margin area. There was difference of 0.004~2.76 % in 4D evaluation of normal structure, and there was significant difference between two evaluation methods in all normal structures, except spinal cord. This study shows that normal structures could be underestimated by 3-D dose evaluation. Therefore, 4-D dose evaluation with Deformable Image Registration will be considered when the dose change is expected in normal structures due to patient's breathing pattern. 4-D dose evaluation with Deformable Image Registration is considered to be a more realistic dose evaluation method by reflecting the movement of normal structures from patient's breathing pattern.