• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.880-882
• /
• 1993

In this paper, a drive circuit for a bifilar-wound hybrid step motor considering mutual inductance and back-emf is investigated. For the suppression circuit, the varition of average torque and torque ripple due to the effect of mutual inductance and back-emf is presented. In order to improve the performance of the motor, a new control scheme is also proposed.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1213-1215
• /
• 2005

For synchronous motor, back-EMF and inductance have mainly effect on the characteristics of the motor. Therefore inductance and back-EMF ranges should be limited to obtain desirable characteristics, and it is possible to get design goal easily by adjusting those two parameters. In this paper EMF-Inductance Map(E-L Map) is presented in order to predict the performance of a motor in initial design. By applying the E-L map to design process of 1MW super-conducting synchronous motor it's usefulness is verified.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.7
• /
• pp.26-35
• /
• 1998

This paper presents a visual inspection algorithm looking for solder joint defects of IC chips on PCBs (Printed Circuit Boards). In this algorithm, seven features are proposed in order to categorize the solder joints into four classes such as normal, insufficient, excess, and no solder, and optimal back-propagation network is determined by error evaluation which depend on the number of neurons in hidden and out-put layers and selection of the features. In the end, a good accuracy of classification performance, an optimal determination of network structure and the effectiveness of chosen seven features are examined by experiment using proposed inspection algorithm.

• Design & Manufacturing
• /
• v.13 no.1
• /
• pp.36-41
• /
• 2019

A large plastic molding requires an injection molding with a large clamping force. However, it could not be prepared in the manufacturing at any time. In order to solve the problem, the injection molding analysis study was conducted on the back cover of 55 inch LED TV. The study compared the case of applying the existing flow system such as hot runner, the improvement of the hot runner lay-out and the precise control of the gate operation time, From the results of using the improved flow system, it was found that the welding and the clamping force were considerably improved as compared with before the improvement. In particular, the clamping force was reduced by 50% compared with before the improvement.

• Journal of the Korean earth science society
• /
• v.40 no.5
• /
• pp.476-486
• /
• 2019

This study examines the controlling role of synoptic disturbances on $PM_{10}$ spring variability in the Korean Peninsula by using empirical orthogonal function (EOF) and back trajectory analyses. Three leading EOF modes are identified, and a lead-lag analysis suggests that $PM_{10}$ variabilities be closely related to the synoptic weather systems. The first EOF shows the spatially homogeneous distribution of $PM_{10}$, which is influenced by travelling anticyclonic disturbance with negative precipitation and descending motion. The second and third modes exhibit the dipole structures of $PM_{10}$, being associated with propagating cyclones. Furthermore, the back-trajectory analysis suggests that the transport of pollutants by anomalous winds associated with synoptic disturbances also contribute to the altered $PM_{10}$ concentration. Hence, a substantial synoptic control should be considered in order to fully understand the $PM_{10}$ spatiotemporal variability.

• Journal of ILASS-Korea
• /
• v.26 no.4
• /
• pp.163-170
• /
• 2021

Emergency generators normally use diesel engines. The generators need to conduct weekly no-load operation inspections to ensure stable performance at emergency situations. In particular, the generators with large diesel engines mainly use rectangle type filter substrates. In order to minimize hazardous emissions generated by generators, optimizing the reduction efficiency through CFD analysis of flow characteristics of PM/NO_X reduction system is important. In this study, we analyzed internal flow by CFD, which is difficult to confirm by experimental method. The main factors in our numerical study are the changes of flow uniformity and back pressure. Therefore, changes in flow characteristics were studied according to urea injector locations, selective catalyst reduction (SCR) diffuser angle, and filter porosity.

• Journal of the Ergonomics Society of Korea
• /
• v.1 no.2
• /
• pp.3-9
• /
• 1982

This study demonstrates that certain personal and task factors can be modelled to predict slip potential as well as back loadings durings dynamic pushing and pulling tasks. Such tasks are com- mon to many manual material handling jobs in industry and the results of this work will hopefully be of use in improved job design. The objective of this research is to formulate and validate a dynamic biomechanical model of pushing and pulling a cart. For pushing and pulling tasks, the model can : (1) estimate foot forces for given hand forces, and (2) estimate tors muscle and vertabral column loadings. In order to formulate and validate the model, experiments involving pushing and pulling of a cart were performed. These experiments produced data of the following type : (1) dynamic forces on the feet, (2) hand forces required to move the cart, (3) body motions as functions of various cart motion and (4) back muscle actions. The model was validated using three different methods; precision was tested using correlation between predicted and measured results, accuracy using standard error between of predicted and measured results, and intuitive comparison of predicted results using sensitivity analyses.

• Journal of Wind Energy
• /
• v.2 no.2
• /
• pp.54-60
• /
• 2011

A PMSG in variable speed wind turbine needs to know the position of rotor for vector control. Since the position sensor has the disadvantage in terms of cost, complexity of the system, a sensorless algorithm is needed. The sensorless strategy using the back EMF estimation is used for PMSG Wind Turbine. This algorithm is comparatively easy to implement than other strategies. This paper introduces the application of stable sensorless control for 2MW direct drive PMSG. In order to confirm the sensorless algorithm, the implementation is proceeded using 2MW direct drive PMSG from no-load condition to full-load condition. To drive 2MW PMSG artificially, 2MW PMSG connected PMSG through the mechanical coupling.

• Journal of the Speleological Society of Korea
• /
• no.84
• /
• pp.22-30
• /
• 2008

With activation plan of Speleological Society of Korean like home page of Speleological Society of Japan cave crane information, caving information, cave Q/A, cave publication, the relation site back the possibility of seeing information regarding the cave which is various in order to be, it reorganizes. The possibility of coming in contact in order to be, various branch information also the general rain specialist regarding the cave resources. Currently the possibility of seeing the various branch data for the application of the cave resources at any time it is, home page of Speleological Society of Korean the possibility of doing to lead in order to be, it proposes the plan. From one person it will be able to study the data regarding the cave of various field in order, all curricular materials regarding the cave resources the educational program which leads a home page about under developing it proposes the activation plan of the cave resources.

• Journal of Society of Preventive Korean Medicine
• /
• v.19 no.1
• /
• pp.83-93
• /
• 2015

Objective : There are many documents that explain efficacy of herbal medicine products (HMP), however, explanations on efficacy are not consistent with the clinical use. The objective of this study is to identify the differences between herbal medicines used in clinics and Korean Medicine literatures. The disease was restricted in low back pain (LBP). Method : In order to investigate HMP for the treatment of LBP, we selected five Korean medical documents as reference and searched for key words related to LBP. Five databases were Information on Herbal prescription published by Ministry of Food and Drug Safety, 56 Herbal Medicines covered with Health Insurance, Guideline for prescribing herbal medicines announced by Ministry Health & Welfare, Explanation on Herbal Medicines published by Korean Pharmaceutical Association, website of Korea Pharmaceutical Information Center (http://www.health.kr/). The keywords were 'low back pain', 'lumbar', 'pain', 'myalgia', 'neuralgia', 'arthralgia', 'arthroneuralgia', and 'sciatica'. We also utilized the result of retrospective cross-sectional study in five university hospitals to investigate HMP used in practice for LBP. Results : From five databases, the number of searched HMP was 25, 12, 40, 12 and 38 respectively and 83 remained after removing duplications. There were 43 kinds of HMP used in clinical practice and only 20 (46.51 %) were included in one or more databases. Conclusion : This study suggests the necessity for reorganizing efficacy of herbal medicine. Standardizing explanation on herbal medicine should reflect the clinical conditions in further study.