• Journal of the Korean Ceramic Society
• /
• v.26 no.3
• /
• pp.416-422
• /
• 1989

The particle size of synthesized SiC powders was decreased with increasing carbon content when the mixture of carbon and silica was carbonized at 1, 45$0^{\circ}C$ after hydrolysis of the mixture with the ranges of 3.1 to 3.5 in the mole ratio of Carbon/Alkoxide. The reacted fraction of $\beta$-SiC nearly had nothing to do with the mole ratio of Carbon/Alkoxide. When the reaction was made by adding 0.5wt% additives in the composition of 3.1 in the mole ratio of carbon/alkoxide, the additives decreased the yield of $\beta$-SiC and its sequence was Ba2O3>B>Fe>Al>Al2O3>Si. The effect of additives promoted the transformation of $\beta$-SiC to $\alpha$-SiC form and shwoed the increasing tendency of lattice constant. The two colors of $\beta$-SiC powder came out : one was the black grey with addition of Al, Al2O3 and B the other the light grey with addition of Fe, B2O3 and Si.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.3
• /
• pp.285-299
• /
• 2004

The purpose of this study is to identify female 500m sprint start motion by the center of gravity position in short track speed skating. The center of gravity position ratio was divided into three type(type A front : 80%-back : 20%, type B front : 70%-back 30%, type C front: 50%-back : 50%). Three video cameras were used for 3D motion analysis with DLT method and the results were as follows: The elapsed time in starting motion was appeared that type B was the shortest and type A was the longest. It was appear that the stroke length of type A was longer than that type B and C during starting phase. This result was similar to displacement of center of gravity. It was appeared that skill type of center of gravity position ratio type B' ankle and knee joint angle were lower than that of type A and C. Observing these results it was conclusion that skill type B of center of gravity position ratio was more faster than that of type A and C. But it is important that these skill type needed to verifying more subjects.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.6
• /
• pp.327-337
• /
• 2011

Effects of microstructural change, tensile properties and impact property according to the change of austenitizing temperature and tempering temperature of AISI 51B20 steel were examined. Regardless of austenite grain size, lath martensite with needle and packet shapes was found at tempering temperature of $300^{\circ}C{\sim}400^{\circ}C$. The needles of lath martensite changed to parallel packet at tempering temperature of $450^{\circ}C{\sim}600^{\circ}C$. As tempering temperature increased, tensile strength, yield strength and hardness decreased, while elongation, ratio of reduction area and Charpy impact energy increased. Grain size increased when quenching temperature was $930^{\circ}C$. Grain size had prominent effect on the mechanical properties of AISI 51B20 steel. Ratio of tensile strength/yield strength and yield strength autenitized at $880^{\circ}C$ followed by tempering at $350^{\circ}C{\sim}450^{\circ}C$ showed higher values than that of autenization at $930^{\circ}C$ due to fine grain size.

• Journal of the Korea Concrete Institute
• /
• v.21 no.5
• /
• pp.557-563
• /
• 2009

This study is on the properties of inorganic porous calcium silicate material made from silica powder through the autoclaving curing, the results of this study should be utilized fundamental data for the development of noise reduction porous solid material using siliceous byproduct generated by various manufacture process. For the manufacture of autoclave curing specimen, various calcareous materials used and siliceous materials used silica powder. In this study, properties in density and compressive strength according to the change of W/B and C/S ratio, microscopy for the shape of pore, SEM and XRD for the examination of hydrate after autoclave curing are carried out respectively. The test results shown that the more slurry density decrease, the more W/B increase at the fresh state, this tendency shown similar to in hardened state. Among the specimens of C/S ratio, the compressive strength of C/S ratio of 0.85 gave the highest the compressive strength. In the results of XRD, tobermorite generated by autoclaving curing was created all of specimens regardless of C/S ratio. To ascertain pore structure, we compared with existing porous calcium silicate product(ALC, organic sound absorbing porous material). The results of microscope observation, pore structure of specimen of this study was similar to that of existing inorganic sound absorbing foam concrete. therefore, we could conformed a possibility of sound absorbing porous solid material on the basis of the results.

• Childhood Kidney Diseases
• /
• v.12 no.2
• /
• pp.150-156
• /
• 2008

Purpose : Many results have reported a correlation between the spot urine protein/creatinine ratio(P/C ratio) and 24-hour urinary protein(24UP) amount. This study was designed to evaluated correlation between 24UP amounts and P/C ratio in children and to find the factors that affect this correlation. Methods : 210 patients who visited the Department of Pediatrics in Busan Paik Hospital from september 2003 to december 2007 were included in this study. All the patients were divided into I, II, III/A, B, C group[I:24UP(mg/$m^2$/day)]<100, II: 100$\leq$24UP<1,000, III: 24UP$\geq$1,000, A: Cr excretion(mg/kg)<15, B: 15$\leq$Cr excretion<25, C: Cr excretion$\geq$25)]. Pearson correlation analysis was performed between 24UP and P/C ratio to evaluate the relationship. We defined fractional difference between 24UP and P/C ratio, and then performed multiple regression analysis. Results : There was a strong positive linear correlation between 24UP and P/C ratio in all patients, and the correlation was also good in each group. The factors affecting accurate quantitation of proteinuria using spot urine P/C ratio was creatinine excretion. Conclusion : Spot urine P/C ratio is a useful test to predict proteinuria roughly. Therefore, we expect that urine P/C ratio can be used as parameter instead of 24UP, if we set cutoff value of P/C ratio considered to creatinine excretion according to age and sex in large pediatric population.

• Asian Journal of Turfgrass Science
• /
• v.23 no.2
• /
• pp.271-278
• /
• 2009

This study was conducted to investigate the effect of the mixture ratio of the inorganic soil amendments on the soil physicochemical properties. In this experiment, three kinds of soil amendments which had similar pH, EC and particle size, the A, B and C, were tested. The mixture ratio of soil amendment were 0%, 3%, 5%, 7% and 10% (V/V) incorporated with sand which met to the USGA(United State of Golf Association) particle standard. To analyze the effects of amendment on chemical soil properties, pH, EC(electrical conductivity) and CEC(cation exchangeable capacity) were measured. The porosity, bulk density and hydraulic conductivity also measured to analyze the changes of physical properties. In the chemical properties, pH was significantly related to the mixture ratios of amendments, A and C(P<0.05), CEC and EC also related to the ratios of C(P<0.01). When the results were applied to the USGA standard of the soil physical properties, the optimum mixture ratios of each amendment were 3% in A and B, and 7~10% in C. To analyze the corelation of mixture ratio versus to physical character, volume of porosity was significantly related to the ratio of B (P<0.05), and showed similar corelation in porosity and hydraulic conductivity with ratio of C(P<0.05). These results indicate that types and mixture ratio of inorganic soil amendments should affect on soil physio-chemical properties of root zone on USGA sand green.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1035-1041
• /
• 2012

This paper examines the effects of fundamental variables on stock returns. Therefore, the major purpose of this study is to identify fundamental variables having a systematical effect on the stock return. The paper uses panel data analysis. We find that the results of regressions say that firm size, book-to-market ratio(B/M), earning-to-price ratio(E/P), cash flow-to-price ratio(C/P) can explain the differences in average returns across stocks.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.2
• /
• pp.185-191
• /
• 1998

A total of 240 weaned pigs (BW 5.4 kg) were allotted in a completely randomized block design to find out the optimum lactose : sucrose ratio for the weaned pigs. Treatments were 100:0 (A), 75:25 (B), 50:50 (C), 25:75 (D) and 0:100 (E) in lactose : sucrose ratio. For the first week after weaning, average daily gain (ADG) and feed/gain (F/G) were improved (p < 0.05) for pigs fed A, B and C diets compared to pigs fed diets D and E, but the average daily feed intakes (ADFI) of the pigs were not different. From d 7 to 14, no significant differences was found in ADG and ADFI among the treatments, but pigs fed the diets A, B and C had improved F/G compared with the pigs fed diets D and E (p < 0.05). From d 15 to 21, no significant differences were found in ADG, ADFI and F/G among the treatments. The digestibility of nutrients was not influenced by the lactose : sucrose ratio except nitrogen. Nitrogen digestibility of A diet was significantly higher than D and E diets (p < 0.05) but no significant differences were found among diets A, B and C. Dry matter and phosphorus excretions were not influenced by the treatments. The pigs fed diets A, B and C excreted significantly less nitrogen than the pigs fed diets D and E. In conclusion, the results suggest that sucrose can effectively replace up to 50% lactose in starter diets.

• Journal of Magnetics
• /
• v.7 no.1
• /
• pp.21-23
• /
• 2002

The magnetoimpedance of $Fe_{91.5-x}Zr_7B_xCu_1Al_{0.5}$alloys has been measured to investigate the influence of structural changes in the nanocrystallization process after thermal treatment. Annealing was performed at temperatures of $350^\circ{C}$, $450^\circ{C}$, and $550^\circ{C}$ for 1 hour in a vacuum. Ultra soft magnetic behavior was observed in the samples annealed at $550^\circ{C}$. The magnetoimpedance ratio and the longitudinal permeability ratio coincided with the softness of the magnetic properties of the thermally treated samples.

• Journal of the Korean Magnetics Society
• /
• v.9 no.5
• /
• pp.234-238
• /
• 1999

Lithium ferrites are prominent in the element of microwave frequency communication core and high frequency memory core because of their low coercivity and the high squareness ratio. This paper reports primarily the development of lithium ferrites with the low coercivity and high squareness ratio. The materials with $Li_{0.48-0.5x}Bi_{0.02}Ni_{0.04}Zn_xFe_{2.46-0.5x}O_4$ (x = 0,0.01, 0.02, 0.03) have been prepared to investigate the physical properties. The addition of ZnO gave raised maximum induction $(B_m)$ and decreased coercive force $(H_c)$, but the squareness ratio $(R\;=\;B_m/B_r)$ was decreased. The specimen of squareness ratio R=0.82, coercive force $H_c=\;1.80\;Oe$ was obtained for $Li_{0.48-0.5x}Bi_{0.02}Ni_{0.04}Zn_xFe_{2.46-0.5x}O_4$ (X=0) sintered at 105$0^{\circ}C$. Also the sample of squareness ratio R = 0.75, coercive force $H_c=\;1.70\;Oe$ for $Li_{0.48-0.5x}Bi_{0.02}Ni_{0.04}Zn_xFe_{2.46-0.5x}O_4$ (X = 0) sintered at 110$0^{\circ}C$ was measured. The Tc was obtained 463$^{\circ}C$ and the Br of environmental temperature variation was stable.