• Journal of the Korean Society of Combustion
• /
• v.5 no.2
• /
• pp.9-17
• /
• 2000

A brief introduction is given on the conditional moment closure model for turbulent nonpremixed combustion. It is based on the transport equations derived through a rigorous mathematical procedure for the conditionally averaged quantities and appropriate modeling forms for conditional scalar dissipation rate, conditional mean velocity and reaction rate. Examples are given for prediction of NO and OR in bluffbody flames, soot distribution in jet flames and autoignition of a methane/ethane jet to predict the ignition delay with respect to initial temperature, pressure and fuel composition. Conditional averaging may also be a powerful modeling concept in other approaches involved in turbulent combustion problems in various different regimes.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.192-200
• /
• 2018

In this study, improvements for error correction, speed, position, and rotation calculation algorithms have been proposed to be used in resolver to digital conversion (RDC) systems. The proposed open-loop system drives the resolver and uses the output signals of the resolver signal to estimate the real time position, the instant speed, and the rotation count with high resolution and accuracy even at high speeds and noise. The proposed solution implements strong features of both closed and open loop based systems while eliminating their weak points. The improvements proposed is resistant to noise owing to digital FIR filter and data averaging techniques. The implementation used for proof of concept is implemented on a hardware using an FPGA and configurable to be used by any resolver.

• Journal of Power Electronics
• /
• v.7 no.3
• /
• pp.238-245
• /
• 2007

This paper considers the problem of regulating the output voltage of a current doubler rectified asymmetric half-bridge (CDRAHB) DC/DC converter via fuzzy integral control. First, we model the dynamic characteristics of the CDRAHB converter with the state-space averaging method, and after introducing an additional integral state of the output regulation error, we obtain the Takagi-Sugeno (TS) fuzzy model for the augmented system. Second, the concept of parallel distributed compensation is applied to the design of the TS fuzzy integral controller, in which the state feedback gains are obtained by solving the linear matrix inequalities (LMIs). Finally, numerical simulations of the considered design method are compared to those of the conventional method, in which a compensated error amplifier is designed for the stability of the feedback control loop.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.848-853
• /
• 1994

This paper describes the concept and basic technique of measuring torsional operational deflection shapes using a laser-based torsional vibration meter, a dual-channel FFT analyzer and operational deflection shapes software running on a PC. Torsional Operational Deflection Shapes (TODS) is defined similar to ODS (Operational Deflection Shapes), with the exception the TODS designates the operational deflection shapes of structures vibrating in a rotational, or angular, degree of freedom. Thus the TODS measurements can be applied to rotating shafts and the results of such a measurement are shown. In some cases it may be great benefit to apply order tracking and/or synchronous time domain averaging techniques in order to avoid smearing and reduce noise problems.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.6
• /
• pp.463-474
• /
• 1997

Metallic elements in dustfall have been known as notable air pollutants directly or indirectly influencing human health and wealth. The first aim of this study was to obtain precise spatial distribution patterns of 5 elements (Pb, Zn, K, Cr, and Al) in dustfall around Suwon area. To predict isometric lines of metal fluxes deposited on unsupervised random sites, the study has applied both spatial statistics as a receptor model and a GIS (geographic information system). Total of 31 sampling sites were selected in the study area (roughly 3 by 3 km grid basis) and dustfall samples were then collected monthly basis by the British deposit gauges from Dec., 1995 to Nov., 1996. The metallic elements in the dustfall were then analyzed by an atomic absorption spectrometer (AAS). On the other hand, a base map overlapped by 7 layers was constructed by using the AutoCAD R13 and ARC/INFO 3.4D. Four different spatial interpolation and expolation techniques such as IDW (inverse distance weighted averaging), TIN (triangulated irregular network), polynomial regression, and kriging technique were examined to compare spatial distribution patterns. Each pattern obtained by each technique was substantally different as varing pollutant types, land of use types, and topological conditions, etc. Thus, our study focused intensively on uncertainty analysis based on a concept of the jackknife and the sum of error distance. It was found that a kriging technique was the best applicalbe in this study area.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.4 s.316
• /
• pp.74-78
• /
• 2007

Novel concept of sensor mat and its signal processing method is proposed for patient monitoring in medical application. Proposed sensor mat structure has sensing inner layer which has cross-linked arrangement using plastic optical fiber(POF). Large core diameter of plastic optical fiber behaved as band pass filter by averaging the noise component caused by unwanted environmental factors. Signal processor followed by sensor output added noise immune performance by filtering out unwanted component. Fail-proof patient breath monitoring scheme was realized by using intelligent decision algorithm. Unlike the conventional approach by using mechanical sensor, which have high sensitivity both to signal and to environmental noise, our approach provided reliable breath motion detection.

• Wind and Structures
• /
• v.14 no.4
• /
• pp.337-357
• /
• 2011

The collection of wind speed time series by means of digital data loggers occurs in many domains, including civil engineering, environmental sciences and wind turbine technology. Since averaging intervals are often significantly larger than typical system time scales, the information lost has to be recovered in order to reconstruct the true dynamics of the system. In the present work we present a simple algorithm capable of generating a real-time wind speed time series from data logger records containing the average, maximum, and minimum values of the wind speed in a fixed interval, as well as the standard deviation. The signal is generated from a generalized random Fourier series. The spectrum can be matched to any desired theoretical or measured frequency distribution. Extreme values are specified through a postprocessing step based on the concept of constrained simulation. Applications of the algorithm to 10-min wind speed records logged at a test site at 60 m height above the ground show that the recorded 10-min values can be reproduced by the simulated time series to a high degree of accuracy.

• Journal of Mechanical Science and Technology
• /
• v.17 no.6
• /
• pp.825-835
• /
• 2003

Previous studies have demonstrated the importance of joint angle errors mainly due to skin artifact and measurement errors during gait analysis. Joint angle errors lead to unreliable kinematics and kinetic analyses in the investigation of human motion. The purpose of this paper is to present the Joint Averaging Coordinate System (JACS) method for human gait analysis. The JACS method is based on the concept of statistical data reduction of anatomically referenced marker data. Since markers are not attached to rigid bodies, different marker combinations lead to slightly different predictions of joint angles. These different combinations can be averaged in order to provide a "best" estimate of joint angle. Results of a gait analysis are presented using clinically meaningful terminology to provide better communication with clinical personal. In order to verify the developed JACS method, a simple three-dimensional knee joint contact model was developed, employing an absolute coordinate system without using any kinematics constraint in which thigh and shank segments can be derived independently. In the experimental data recovery, the separation and penetration distance of the knee joint is supposed to be zero during one gait cycle if there are no errors in the experimental data. Using the JACS method, the separation and penetration error was reduced compared to well-developed existing methods such as ACRS and Spoor & Veldpaus method. The separation and penetration distance ranged up to 15 mm and 12 mm using the Spoor & Veldpaus and ACRS method, respectively, compared to 9 mm using JACS method. Statistical methods like the JACS can be applied in conjunction with existing techniques that reduce systematic errors in marker location, leading to an improved assessment of human gait.

• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.14-20
• /
• 2015

A Large Eddy Simulation(LES) was performed for the prediction of unsteady dispersion behavior of hydrogen fluoride (HF). The HF leakage accident occurred at the Gumi fourth industrial complex was numerically investigated using the Fire Dynamics Simulator (FDS) based on the LES. The accident area was modeled three-dimensionally and time-varying boundary conditions for wind were adopted in the simulation for considering the realistic accident conditions. The Message Passing Interface (MPI) parallel computation technique was used to reduce the computational time. As a result, it was found that the present LES simulation could predict the unsteady dispersion features of HF near the accident area effectively. The dispersion behaviors of the leaked HF was much affected by the unsteady wind direction. The LES could predict the time variation of the HF concentration reasonably and give an useful information for the risk analysis while the prediction with the time-averaging concept of HF concentration had a limitation for the amount of HF concentration at specific location point. It was identified that the LES is very useful to predict the dispersion characteristics of hazardous chemicals.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.3
• /
• pp.290-301
• /
• 2006

A push pull hood system is frequently applied to control contaminants evaporated from an open surface tank. Efficiency of push pull hood system is affected by various parameters, such as, cross draft, vessel shapes, tank surface area, liquid temperature. A previous work assisted by flow visualization technique qualitatively showed that a strong cross draft blown from the pull hood to push slot could destroy a stable wall-jet on the surface of tank, resulting in the abrupt escape of smoke from the surface. In this study, the tracer gas method was applied to determine the effect of cross-draft on the capture efficiency qualitatively. A new concept of capture efficiency was introduced, that is, linear efficiency. This can be determined by measuring the mass of tracer gas in the duct of pull hood while the linear tracer source is in between push slot and pull hood. By traversing the linear tracer source from the push slot to the pull hood, it can be found where the contaminant is escaped from the tank. Total capture efficiency can be determined by averaging the linear efficiencies. Under the condition of cross-draft velocities of 0, 0.4, 0.75, 1.05 and 1.47m/s, total capture efficiencies were measured as 97.6, 95.4, 94.6, 92.7 and 70.5% respectively. The abrupt reduction of efficiency with cross-draft velocity of 1.47m/s was due to the destruction of tank surface wall-jet by the counter-current cross-draft. The same phenomenon was observed in the previous flow visualization study. As an alternative to overcome this abrupt efficiency drop, the 20% increase of hood flow rates was tested, resulting in 20% efficiency increase.